Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756922AbcKCP0S (ORCPT ); Thu, 3 Nov 2016 11:26:18 -0400 Received: from mail-wm0-f51.google.com ([74.125.82.51]:35128 "EHLO mail-wm0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758022AbcKCP0M (ORCPT ); Thu, 3 Nov 2016 11:26:12 -0400 From: Alexandre Bailon To: david@lechnology.com, b-liu@ti.com, balbi@kernel.org Cc: kishon@ti.com, khilman@baylibre.com, linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, nsekhar@ti.com, Alexandre Bailon Subject: [PATCH v3 0/5] usb: musb: da8xx: Fix few issues Date: Thu, 3 Nov 2016 16:26:00 +0100 Message-Id: <1478186765-19840-1-git-send-email-abailon@baylibre.com> X-Mailer: git-send-email 2.7.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1122 Lines: 29 Currently, the USB OTG of the da8xx doesn't work. This series intend to fix them. Change in v2: * Fix the error path da8xx_musb_init() Changes in v3: * Remove the host workaround that was not working on every platform * Add a property to the devicetree node of phy to force the phy in a specific mode (host or device). * Only use dr_mode to configure the controller mode and let the phy in OTG mode. The main goal of this change is to prevent the phy to be set in host or device mode because these modes have some issues. Alexandre Bailon (5): usb: musb: da8xx: Call earlier clk_prepare_enable() phy: da8xx-usb: Configure CFGCHIP2 to support OTG workaround dt/bindings: Add a new property to DA8xx USB PHY phy: da8xx-usb: Use usb20_force_mode property to configure the phy mode usb: musb: da8xx: Remove set_mode callback .../devicetree/bindings/phy/phy-da8xx-usb.txt | 5 +++ drivers/phy/phy-da8xx-usb.c | 28 ++++++++++++--- drivers/usb/musb/da8xx.c | 40 +++++----------------- 3 files changed, 36 insertions(+), 37 deletions(-) -- 2.7.3