Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1757839AbcKCP70 (ORCPT ); Thu, 3 Nov 2016 11:59:26 -0400 Received: from mail-wm0-f53.google.com ([74.125.82.53]:37909 "EHLO mail-wm0-f53.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758478AbcKCP7U (ORCPT ); Thu, 3 Nov 2016 11:59:20 -0400 From: Alexandre Bailon To: khilman@baylibre.com, robh+dt@kernel.org, b-liu@ti.com Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, nsekhar@ti.com, Petr Kulhavy , Alexandre Bailon Subject: [PATCH v4 1/4] dt/bindings: Add binding for the DA8xx MUSB driver Date: Thu, 3 Nov 2016 16:59:09 +0100 Message-Id: <1478188752-22447-2-git-send-email-abailon@baylibre.com> X-Mailer: git-send-email 2.7.3 In-Reply-To: <1478188752-22447-1-git-send-email-abailon@baylibre.com> References: <1478188752-22447-1-git-send-email-abailon@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1681 Lines: 63 From: Petr Kulhavy DT binding for the TI DA8xx/OMAP-L1x/AM17xx/AM18xx MUSB driver. Signed-off-by: Petr Kulhavy Signed-off-by: Alexandre Bailon Acked-by: Rob Herring --- .../devicetree/bindings/usb/da8xx-usb.txt | 43 ++++++++++++++++++++++ 1 file changed, 43 insertions(+) create mode 100644 Documentation/devicetree/bindings/usb/da8xx-usb.txt diff --git a/Documentation/devicetree/bindings/usb/da8xx-usb.txt b/Documentation/devicetree/bindings/usb/da8xx-usb.txt new file mode 100644 index 0000000..ccb844a --- /dev/null +++ b/Documentation/devicetree/bindings/usb/da8xx-usb.txt @@ -0,0 +1,43 @@ +TI DA8xx MUSB +~~~~~~~~~~~~~ +For DA8xx/OMAP-L1x/AM17xx/AM18xx platforms. + +Required properties: +~~~~~~~~~~~~~~~~~~~~ + - compatible : Should be set to "ti,da830-musb". + + - reg: Offset and length of the USB controller register set. + + - interrupts: The USB interrupt number. + + - interrupt-names: Should be set to "mc". + + - dr_mode: The USB operation mode. Should be one of "host", "peripheral" or "otg". + + - phys: Phandle for the PHY device + + - phy-names: Should be "usb-phy" + +Optional properties: +~~~~~~~~~~~~~~~~~~~~ + - vbus-supply: Phandle to a regulator providing the USB bus power. + +Example: + usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <0>; + status = "okay"; + }; + usb0: usb@200000 { + compatible = "ti,da830-musb"; + reg = <0x00200000 0x10000>; + interrupts = <58>; + interrupt-names = "mc"; + + dr_mode = "host"; + vbus-supply = <&usb_vbus>; + phys = <&usb_phy 0>; + phy-names = "usb-phy"; + + status = "okay"; + }; -- 2.7.3