Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1758601AbcKCP71 (ORCPT ); Thu, 3 Nov 2016 11:59:27 -0400 Received: from mail-wm0-f52.google.com ([74.125.82.52]:35345 "EHLO mail-wm0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758491AbcKCP7V (ORCPT ); Thu, 3 Nov 2016 11:59:21 -0400 From: Alexandre Bailon To: khilman@baylibre.com, robh+dt@kernel.org, b-liu@ti.com Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, nsekhar@ti.com, Alexandre Bailon Subject: [PATCH v4 4/4] ARM: dts: da850: Add the usb otg device node Date: Thu, 3 Nov 2016 16:59:12 +0100 Message-Id: <1478188752-22447-5-git-send-email-abailon@baylibre.com> X-Mailer: git-send-email 2.7.3 In-Reply-To: <1478188752-22447-1-git-send-email-abailon@baylibre.com> References: <1478188752-22447-1-git-send-email-abailon@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1408 Lines: 57 This adds the device tree node for the usb otg controller present in the da850 family of SoC's. This also enables the otg usb controller for the lcdk board. Signed-off-by: Alexandre Bailon --- arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++ arch/arm/boot/dts/da850.dtsi | 15 +++++++++++++++ 2 files changed, 23 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index 7b8ab21..9f5040c 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -158,6 +158,14 @@ rx-num-evt = <32>; }; +&usb_phy { + status = "okay"; + }; + +&usb0 { + status = "okay"; +}; + &aemif { pinctrl-names = "default"; pinctrl-0 = <&nand_pins>; diff --git a/arch/arm/boot/dts/da850.dtsi b/arch/arm/boot/dts/da850.dtsi index f79e1b9..322a31a 100644 --- a/arch/arm/boot/dts/da850.dtsi +++ b/arch/arm/boot/dts/da850.dtsi @@ -372,6 +372,21 @@ >; status = "disabled"; }; + usb_phy: usb-phy { + compatible = "ti,da830-usb-phy"; + #phy-cells = <1>; + status = "disabled"; + }; + usb0: usb@200000 { + compatible = "ti,da830-musb"; + reg = <0x200000 0x10000>; + interrupts = <58>; + interrupt-names = "mc"; + dr_mode = "otg"; + phys = <&usb_phy 0>; + phy-names = "usb-phy"; + status = "disabled"; + }; gpio: gpio@226000 { compatible = "ti,dm6441-gpio"; gpio-controller; -- 2.7.3