Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1760075AbcKCS3f (ORCPT ); Thu, 3 Nov 2016 14:29:35 -0400 Received: from mail-qt0-f181.google.com ([209.85.216.181]:33581 "EHLO mail-qt0-f181.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1760036AbcKCS3d (ORCPT ); Thu, 3 Nov 2016 14:29:33 -0400 From: Olimpiu Dejeu To: robh@kernel.org Cc: lee.jones@linaro.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, devicetree@vger.kernel.org, jg1.han@samsung.com, Olimpiu Dejeu Subject: [PATCH 2/2] backlight: arcxcnn: devicetree bindings for ArticSand devices Date: Thu, 3 Nov 2016 14:29:28 -0400 Message-Id: <1478197768-3694-1-git-send-email-olimpiu@arcticsand.com> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1859 Lines: 53 Resubmition of arcxcnn backliught driver addressing the naming convention concerns raised by Rob H. Note that all the device tree properties are determined by the board design or IC EPROM settings and are not intended to be user adjustable. Signed-off-by: Olimpiu Dejeu --- .../bindings/leds/backlight/arcxcnn_bl.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt new file mode 100644 index 0000000..a7b6ff2 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt @@ -0,0 +1,33 @@ +Binding for ArcticSand arc2c0608 LED driver + +Required properties: +- compatible: should be "arc,arc2c0608" +- reg: slave address + +Optional properties: +- default-brightness: brightness value on boot, value from: 0-4095 +- label: The name of the backlight device + See Documentation/devicetree/bindings/leds/common.txt +- led-sources: List of enabled channels from 0 to 5. + See Documentation/devicetree/bindings/leds/common.txt + +- arc,led-config-0: setting for register ILED_CONFIG_0 +- arc,led-config-1: setting for register ILED_CONFIG_1 +- arc,dim-freq: PWM mode frequence setting (bits [3:0] used) +- arc,comp-config: setting for register CONFIG_COMP +- arc,filter-config: setting for register FILTER_CONFIG +- arc,trim-config: setting for register IMAXTUNE + +Note: Optional properties not specified will default to values in IC EPROM + +Example: + +arc2c0608@30 { + compatible = "arc,arc2c0608"; + reg = <0x30>; + default-brightness = <500>; + label = "lcd-backlight"; + linux,default-trigger = "backlight"; + led-sources = <0 1 2 5>; +}; + -- 2.7.4