Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S938599AbcKDSQr (ORCPT ); Fri, 4 Nov 2016 14:16:47 -0400 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:33148 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934968AbcKDSQq (ORCPT ); Fri, 4 Nov 2016 14:16:46 -0400 From: Mark Brown To: Axel Haslam Cc: Mark Brown , broonie@kernel.org, lgirdwood@gmail.com, khilman@baylibre.com, nsekhar@ti.com, david@lechnology.com, robh+dt@kernel.org, linux-kernel@vger.kernel.org, linux-kernel@vger.kernel.org In-Reply-To: <20161103111144.511-2-ahaslam@baylibre.com> Message-Id: Date: Fri, 04 Nov 2016 12:16:30 -0600 X-SA-Exim-Connect-IP: 198.233.217.214 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "regulator: core: Add new API to poll for error conditions" to the regulator tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: No (on mezzanine.sirena.org.uk); Unknown failure Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5892 Lines: 166 The patch regulator: core: Add new API to poll for error conditions has been applied to the regulator tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From 1b5b42216469b05ef4b5916cb40b127dfab1da88 Mon Sep 17 00:00:00 2001 From: Axel Haslam Date: Thu, 3 Nov 2016 12:11:42 +0100 Subject: [PATCH] regulator: core: Add new API to poll for error conditions Regulator consumers can receive event notifications when errors are reported to the driver, but currently, there is no way for a regulator consumer to know when the error is over. To allow a regulator consumer to poll for error conditions add a new API: regulator_get_error_flags. Signed-off-by: Axel Haslam Signed-off-by: Mark Brown --- drivers/regulator/core.c | 33 +++++++++++++++++++++++++++++++++ include/linux/regulator/consumer.h | 26 ++++++++++++++++++++++++++ include/linux/regulator/driver.h | 4 ++++ 3 files changed, 63 insertions(+) diff --git a/drivers/regulator/core.c b/drivers/regulator/core.c index 67426c0477d3..08260c215895 100644 --- a/drivers/regulator/core.c +++ b/drivers/regulator/core.c @@ -3359,6 +3359,39 @@ unsigned int regulator_get_mode(struct regulator *regulator) } EXPORT_SYMBOL_GPL(regulator_get_mode); +static int _regulator_get_error_flags(struct regulator_dev *rdev, + unsigned int *flags) +{ + int ret; + + mutex_lock(&rdev->mutex); + + /* sanity check */ + if (!rdev->desc->ops->get_error_flags) { + ret = -EINVAL; + goto out; + } + + ret = rdev->desc->ops->get_error_flags(rdev, flags); +out: + mutex_unlock(&rdev->mutex); + return ret; +} + +/** + * regulator_get_error_flags - get regulator error information + * @regulator: regulator source + * @flags: pointer to store error flags + * + * Get the current regulator error information. + */ +int regulator_get_error_flags(struct regulator *regulator, + unsigned int *flags) +{ + return _regulator_get_error_flags(regulator->rdev, flags); +} +EXPORT_SYMBOL_GPL(regulator_get_error_flags); + /** * regulator_set_load - set regulator load * @regulator: regulator source diff --git a/include/linux/regulator/consumer.h b/include/linux/regulator/consumer.h index 692108222271..528eb1f5273e 100644 --- a/include/linux/regulator/consumer.h +++ b/include/linux/regulator/consumer.h @@ -120,6 +120,25 @@ struct regmap; #define REGULATOR_EVENT_PRE_DISABLE 0x400 #define REGULATOR_EVENT_ABORT_DISABLE 0x800 +/* + * Regulator errors that can be queried using regulator_get_error_flags + * + * UNDER_VOLTAGE Regulator output is under voltage. + * OVER_CURRENT Regulator output current is too high. + * REGULATION_OUT Regulator output is out of regulation. + * FAIL Regulator output has failed. + * OVER_TEMP Regulator over temp. + * + * NOTE: These errors can be OR'ed together. + */ + +#define REGULATOR_ERROR_UNDER_VOLTAGE BIT(1) +#define REGULATOR_ERROR_OVER_CURRENT BIT(2) +#define REGULATOR_ERROR_REGULATION_OUT BIT(3) +#define REGULATOR_ERROR_FAIL BIT(4) +#define REGULATOR_ERROR_OVER_TEMP BIT(5) + + /** * struct pre_voltage_change_data - Data sent with PRE_VOLTAGE_CHANGE event * @@ -237,6 +256,8 @@ int regulator_get_current_limit(struct regulator *regulator); int regulator_set_mode(struct regulator *regulator, unsigned int mode); unsigned int regulator_get_mode(struct regulator *regulator); +int regulator_get_error_flags(struct regulator *regulator, + unsigned int *flags); int regulator_set_load(struct regulator *regulator, int load_uA); int regulator_allow_bypass(struct regulator *regulator, bool allow); @@ -477,6 +498,11 @@ static inline unsigned int regulator_get_mode(struct regulator *regulator) return REGULATOR_MODE_NORMAL; } +static inline int regulator_get_error_flags(struct regulator *regulator) +{ + return -EINVAL; +} + static inline int regulator_set_load(struct regulator *regulator, int load_uA) { return REGULATOR_MODE_NORMAL; diff --git a/include/linux/regulator/driver.h b/include/linux/regulator/driver.h index 37b532410528..dac8e7b16bc6 100644 --- a/include/linux/regulator/driver.h +++ b/include/linux/regulator/driver.h @@ -100,6 +100,7 @@ struct regulator_linear_range { * * @set_mode: Set the configured operating mode for the regulator. * @get_mode: Get the configured operating mode for the regulator. + * @get_error_flags: Get the current error(s) for the regulator. * @get_status: Return actual (not as-configured) status of regulator, as a * REGULATOR_STATUS value (or negative errno) * @get_optimum_mode: Get the most efficient operating mode for the regulator @@ -169,6 +170,9 @@ struct regulator_ops { int (*set_mode) (struct regulator_dev *, unsigned int mode); unsigned int (*get_mode) (struct regulator_dev *); + /* retrieve current error flags on the regulator */ + int (*get_error_flags)(struct regulator_dev *, unsigned int *flags); + /* Time taken to enable or set voltage on the regulator */ int (*enable_time) (struct regulator_dev *); int (*set_ramp_delay) (struct regulator_dev *, int ramp_delay); -- 2.10.1