Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S935849AbcKKSRe (ORCPT ); Fri, 11 Nov 2016 13:17:34 -0500 Received: from foss.arm.com ([217.140.101.70]:49906 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934642AbcKKSR3 (ORCPT ); Fri, 11 Nov 2016 13:17:29 -0500 Date: Fri, 11 Nov 2016 18:16:06 +0000 From: "liviu.dudau@arm.com" To: Gabriele Paoloni Cc: Arnd Bergmann , "linux-arm-kernel@lists.infradead.org" , Yuanzhichang , "mark.rutland@arm.com" , "devicetree@vger.kernel.org" , "lorenzo.pieralisi@arm.com" , "minyard@acm.org" , "linux-pci@vger.kernel.org" , "benh@kernel.crashing.org" , John Garry , "will.deacon@arm.com" , "linux-kernel@vger.kernel.org" , "xuwei (O)" , Linuxarm , "zourongrong@gmail.com" , "robh+dt@kernel.org" , "kantyzc@163.com" , "linux-serial@vger.kernel.org" , "catalin.marinas@arm.com" , "olof@lixom.net" , "bhelgaas@googl e.com" , "zhichang.yuan02@gmail.com" Subject: Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on Hip06 Message-ID: <20161111181606.GN10219@e106497-lin.cambridge.arm.com> References: <1478576829-112707-1-git-send-email-yuanzhichang@hisilicon.com> <17821285.aIcTyCGn5n@wuerfel> <10334260.ztLXZ2Oynd@wuerfel> <20161111144539.GL10219@e106497-lin.cambridge.arm.com> MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8 Content-Disposition: inline Content-Transfer-Encoding: 8bit In-Reply-To: User-Agent: Mutt/1.5.24 (2015-08-30) Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 9398 Lines: 242 On Fri, Nov 11, 2016 at 03:53:53PM +0000, Gabriele Paoloni wrote: > Hi Liviu Hi Gabriele, > > > -----Original Message----- > > From: liviu.dudau@arm.com [mailto:liviu.dudau@arm.com] > > Sent: 11 November 2016 14:46 > > To: Gabriele Paoloni > > Cc: Arnd Bergmann; linux-arm-kernel@lists.infradead.org; Yuanzhichang; > > mark.rutland@arm.com; devicetree@vger.kernel.org; > > lorenzo.pieralisi@arm.com; minyard@acm.org; linux-pci@vger.kernel.org; > > benh@kernel.crashing.org; John Garry; will.deacon@arm.com; linux- > > kernel@vger.kernel.org; xuwei (O); Linuxarm; zourongrong@gmail.com; > > robh+dt@kernel.org; kantyzc@163.com; linux-serial@vger.kernel.org; > > catalin.marinas@arm.com; olof@lixom.net; bhelgaas@googl e.com; > > zhichang.yuan02@gmail.com > > Subject: Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on > > Hip06 > > > > On Fri, Nov 11, 2016 at 01:39:35PM +0000, Gabriele Paoloni wrote: > > > Hi Arnd > > > > > > > -----Original Message----- > > > > From: Arnd Bergmann [mailto:arnd@arndb.de] > > > > Sent: 10 November 2016 16:07 > > > > To: Gabriele Paoloni > > > > Cc: linux-arm-kernel@lists.infradead.org; Yuanzhichang; > > > > mark.rutland@arm.com; devicetree@vger.kernel.org; > > > > lorenzo.pieralisi@arm.com; minyard@acm.org; linux- > > pci@vger.kernel.org; > > > > benh@kernel.crashing.org; John Garry; will.deacon@arm.com; linux- > > > > kernel@vger.kernel.org; xuwei (O); Linuxarm; zourongrong@gmail.com; > > > > robh+dt@kernel.org; kantyzc@163.com; linux-serial@vger.kernel.org; > > > > catalin.marinas@arm.com; olof@lixom.net; liviu.dudau@arm.com; > > > > bhelgaas@googl e.com; zhichang.yuan02@gmail.com > > > > Subject: Re: [PATCH V5 3/3] ARM64 LPC: LPC driver implementation on > > > > Hip06 > > > > > > > > On Thursday, November 10, 2016 3:36:49 PM CET Gabriele Paoloni > > wrote: > > > > > > > > > > Where should we get the range from? For LPC we know that it is > > going > > > > > Work on anything that is not used by PCI I/O space, and this is > > > > > why we use [0, PCIBIOS_MIN_IO] > > > > > > > > It should be allocated the same way we allocate PCI config space > > > > segments. This is currently done with the io_range list in > > > > drivers/pci/pci.c, which isn't perfect but could be extended > > > > if necessary. Based on what others commented here, I'd rather > > > > make the differences between ISA/LPC and PCI I/O ranges smaller > > > > than larger. > > > > Gabriele, > > > > > > > > I am not sure this would make sense... > > > > > > IMHO all the mechanism around io_range_list is needed to provide the > > > "mapping" between I/O tokens and physical CPU addresses. > > > > > > Currently the available tokens range from 0 to IO_SPACE_LIMIT. > > > > > > As you know the I/O memory accessors operate on whatever > > > __of_address_to_resource sets into the resource (start, end). > > > > > > With this special device in place we cannot know if a resource is > > > assigned with an I/O token or a physical address, unless we forbid > > > the I/O tokens to be in a specific range. > > > > > > So this is why we are changing the offsets of all the functions > > > handling io_range_list (to make sure that a range is forbidden to > > > the tokens and is available to the physical addresses). > > > > > > We have chosen this forbidden range to be [0, PCIBIOS_MIN_IO) > > > because this is the maximum physical I/O range that a non PCI device > > > can operate on and because we believe this does not impose much > > > restriction on the available I/O token range; that now is > > > [PCIBIOS_MIN_IO, IO_SPACE_LIMIT]. > > > So we believe that the chosen forbidden range can accommodate > > > any special ISA bus device with no much constraint on the rest > > > of I/O tokens... > > > > Your idea is a good one, however you are abusing PCIBIOS_MIN_IO and you > > actually need another variable for "reserving" an area in the I/O space > > that can be used for physical addresses rather than I/O tokens. > > > > The one good example for using PCIBIOS_MIN_IO is when your > > platform/architecture > > does not support legacy ISA operations *at all*. In that case someone > > sets the PCIBIOS_MIN_IO to a non-zero value to reserve that I/O range > > so that it doesn't get used. With Zhichang's patch you now start > > forcing > > those platforms to have a valid address below PCIBIOS_MIN_IO. > > But if PCIBIOS_MIN_IO is 0 then it means that all I/O space is to be used > by PCI controllers only... Nope, that is not what it means. It means that PCI devices can see I/O addresses on the bus that start from 0. There never was any usage for non-PCI controllers when PCIBIOS_MIN_IO != 0. That is what Zhichang is trying to do now and what I think is not the right thing (and not enough anyway). > so if you have a special bus device using > an I/O range in this case should be a PCI controller... That has always been the case. It is this series that wants to introduce the new meaning. > i.e. I would > expect it to fall back into the case of I/O tokens redirection rather than > physical addresses redirection (as mentioned below from my previous reply). > What do you think? I think you have looked too much at the code *with* Zhichang's patches applied. Take a step back and look at how PCIBIOS_MIN_IO is used now, before you apply the patches. It is all about PCI addresses and there is no notion of non-PCI busses using PCI framework. Only platforms and architectures that try to work around some legacy standards (ISA) or HW restrictions. Best regards, Liviu > > Thanks > > Gab > > > > > > For the general case you also have to bear in mind that PCIBIOS_MIN_IO > > could > > be zero. In that case, what is your "forbidden" range? [0, 0) ? So it > > makes > > sense to add a new #define that should only be defined by those > > architectures/ > > platforms that want to reserve on top of PCIBIOS_MIN_IO another region > > where I/O tokens can't be generated for. > > > > Best regards, > > Liviu > > > > > > > > > > > > > > > Your current version has > > > > > > > > > > > > if (arm64_extio_ops->pfout) > > \ > > > > > > arm64_extio_ops->pfout(arm64_extio_ops- > > >devpara,\ > > > > > > addr, value, sizeof(type)); > > \ > > > > > > > > > > > > Instead, just subtract the start of the range from the logical > > > > > > port number to transform it back into a bus-local port number: > > > > > > > > > > These accessors do not operate on IO tokens: > > > > > > > > > > If (arm64_extio_ops->start > addr || arm64_extio_ops->end < addr) > > > > > addr is not going to be an I/O token; in fact patch 2/3 imposes > > that > > > > > the I/O tokens will start at PCIBIOS_MIN_IO. So from 0 to > > > > PCIBIOS_MIN_IO > > > > > we have free physical addresses that the accessors can operate > > on. > > > > > > > > Ah, I missed that part. I'd rather not use PCIBIOS_MIN_IO to refer > > to > > > > the logical I/O tokens, the purpose of that macro is really meant > > > > for allocating PCI I/O port numbers within the address space of > > > > one bus. > > > > > > As I mentioned above, special devices operate on CPU addresses > > directly, > > > not I/O tokens. For them there is no way to distinguish.... > > > > > > > > > > > Note that it's equally likely that whichever next platform needs > > > > non-mapped I/O access like this actually needs them for PCI I/O > > space, > > > > and that will use it on addresses registered to a PCI host bridge. > > > > > > Ok so here you are talking about a platform that has got an I/O range > > > under the PCI host controller, right? > > > And this I/O range cannot be directly memory mapped but needs special > > > redirections for the I/O tokens, right? > > > > > > In this scenario registering the I/O ranges with the forbidden range > > > implemented by the current patch would still allow to redirect I/O > > > tokens as long as arm64_extio_ops->start >= PCIBIOS_MIN_IO > > > > > > So effectively the special PCI host controller > > > 1) knows the physical range that needs special redirection > > > 2) register such range > > > 3) uses pci_pio_to_address() to retrieve the IO tokens for the > > > special accessors > > > 4) sets arm64_extio_ops->start/end to the IO tokens retrieved in 3) > > > > > > So to be honest I think this patch can fit well both with > > > special PCI controllers that need I/O tokens redirection and with > > > special non-PCI controllers that need non-PCI I/O physical > > > address redirection... > > > > > > Thanks (and sorry for the long reply but I didn't know how > > > to make the explanation shorter :) ) > > > > > > Gab > > > > > > > > > > > If we separate the two steps: > > > > > > > > a) assign a range of logical I/O port numbers to a bus > > > > b) register a set of helpers for redirecting logical I/O > > > > port to a helper function > > > > > > > > then I think the code will get cleaner and more flexible. > > > > It should actually then be able to replace the powerpc > > > > specific implementation. > > > > > > > > Arnd > > > > -- > > ==================== > > | I would like to | > > | fix the world, | > > | but they're not | > > | giving me the | > > \ source code! / > > --------------- > > ¯\_(ツ)_/¯ -- ==================== | I would like to | | fix the world, | | but they're not | | giving me the | \ source code! / --------------- ¯\_(ツ)_/¯