Subject: Re: [PATCH 11/11] mtd: nand: denali: remove debug lines of __FILE__,
 __LINE__, __func__
To: Masahiro Yamada <yamada.masahiro@socionext.com>,
        linux-mtd@lists.infradead.org
References: <1478666130-13413-1-git-send-email-yamada.masahiro@socionext.com>
 <1478666130-13413-12-git-send-email-yamada.masahiro@socionext.com>
Cc: Alan Cox <alan@linux.intel.com>,
        David Woodhouse <David.Woodhouse@intel.com>,
        Jason Roberts <jason.e.roberts@intel.com>,
        Chuanxiao Dong <chuanxiao.dong@intel.com>,
        Dinh Nguyen <dinguyen@altera.com>, linux-kernel@vger.kernel.org,
        Boris Brezillon <boris.brezillon@free-electrons.com>,
        Brian Norris <computersforpeace@gmail.com>,
        Richard Weinberger <richard@nod.at>,
        David Woodhouse <dwmw2@infradead.org>,
        Cyrille Pitchen <cyrille.pitchen@atmel.com>
From: Marek Vasut <marek.vasut@gmail.com>
Message-ID: <360ae82b-d601-d54a-a64e-fcc41b1675b4@gmail.com>
Date: Sat, 12 Nov 2016 22:41:41 +0100
User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101
 Icedove/45.4.0
MIME-Version: 1.0
In-Reply-To: <1478666130-13413-12-git-send-email-yamada.masahiro@socionext.com>
Content-Type: text/plain; charset=utf-8
Content-Transfer-Encoding: 7bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 2059
Lines: 63

On 11/09/2016 05:35 AM, Masahiro Yamada wrote:
> Such debug lines might be useful when debugging the driver first,
> but should be deleted from the upstream code.
> 
> Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>

Reviewed-by: Marek Vasut <marek.vasut@gmail.com>

> ---
> 
>  drivers/mtd/nand/denali.c | 12 ------------
>  1 file changed, 12 deletions(-)
> 
> diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c
> index 14e66ab..e32e13c 100644
> --- a/drivers/mtd/nand/denali.c
> +++ b/drivers/mtd/nand/denali.c
> @@ -181,9 +181,6 @@ static uint16_t denali_nand_reset(struct denali_nand_info *denali)
>  {
>  	int i;
>  
> -	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
> -		__FILE__, __LINE__, __func__);
> -
>  	for (i = 0; i < denali->max_banks; i++)
>  		iowrite32(INTR_STATUS__RST_COMP | INTR_STATUS__TIME_OUT,
>  		denali->flash_reg + INTR_STATUS(i));
> @@ -233,9 +230,6 @@ static void nand_onfi_timing_set(struct denali_nand_info *denali,
>  	uint16_t acc_clks;
>  	uint16_t addr_2_data, re_2_we, re_2_re, we_2_re, cs_cnt;
>  
> -	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
> -		__FILE__, __LINE__, __func__);
> -
>  	en_lo = CEIL_DIV(Trp[mode], CLK_X);
>  	en_hi = CEIL_DIV(Treh[mode], CLK_X);
>  #if ONFI_BLOOM_TIME
> @@ -480,9 +474,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
>  	uint8_t maf_id, device_id;
>  	int i;
>  
> -	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
> -			__FILE__, __LINE__, __func__);
> -
>  	/*
>  	 * Use read id method to get device ID and other params.
>  	 * For some NAND chips, controller can't report the correct
> @@ -537,9 +528,6 @@ static uint16_t denali_nand_timing_set(struct denali_nand_info *denali)
>  static void denali_set_intr_modes(struct denali_nand_info *denali,
>  					uint16_t INT_ENABLE)
>  {
> -	dev_dbg(denali->dev, "%s, Line %d, Function: %s\n",
> -		__FILE__, __LINE__, __func__);
> -
>  	if (INT_ENABLE)
>  		iowrite32(1, denali->flash_reg + GLOBAL_INT_ENABLE);
>  	else
> 


-- 
Best regards,
Marek Vasut