Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752630AbcKNNSY (ORCPT ); Mon, 14 Nov 2016 08:18:24 -0500 Received: from smtpoutz299.laposte.net ([178.22.154.199]:34223 "EHLO smtpoutz2.laposte.net" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1752174AbcKNNSV (ORCPT ); Mon, 14 Nov 2016 08:18:21 -0500 Subject: Re: Is Documentation/networking/phy.txt still up-to-date? To: Florian Fainelli , afleming@freescale.com, jgarzik@pobox.com, =?UTF-8?B?TcOlbnMgUnVsbGfDpXJk?= References: <582323A8.20706@laposte.net> <24676d24-5b07-7d26-6ffa-14e857960a52@gmail.com> Cc: netdev , LKML , "David S. Miller" , Mason From: Sebastian Frias Message-ID: <5829B999.9020109@laposte.net> Date: Mon, 14 Nov 2016 14:18:17 +0100 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:38.0) Gecko/20100101 Thunderbird/38.8.0 MIME-Version: 1.0 In-Reply-To: <24676d24-5b07-7d26-6ffa-14e857960a52@gmail.com> Content-Type: text/plain; charset=utf-8 Content-Transfer-Encoding: 7bit X-VR-SrcIP: 92.154.11.170 X-VR-FullState: 0 X-VR-Score: -100 X-VR-Cause-1: gggruggvucftvghtrhhoucdtuddrfeelfedruddtgdegjecutefuodetggdotefrodftvfcurfhrohhf X-VR-Cause-2: ihhlvgemucfntefrqffuvffgnecuuegrihhlohhuthemucehtddtnecusecvtfgvtghiphhivghnthhs X-VR-Cause-3: ucdlqddutddtmdenucfjughrpefuvfhfhffkffgfgggjtgfgsehtjegrtddtfeejnecuhfhrohhmpefu X-VR-Cause-4: vggsrghsthhirghnucfhrhhirghsuceoshhfkeegsehlrghpohhsthgvrdhnvghtqeenucffohhmrghi X-VR-Cause-5: nhepmhgrihhlqdgrrhgthhhivhgvrdgtohhmnecukfhppeelvddrudehgedruddurddujedtnecurfgr X-VR-Cause-6: rhgrmhepmhhouggvpehsmhhtphhouhhtpdhhvghloheplgdujedvrddvjedrtddrvddugegnpdhinhgv X-VR-Cause-7: thepledvrdduheegrdduuddrudejtddpmhgrihhlfhhrohhmpehsfhekgeeslhgrphhoshhtvgdrnhgv X-VR-Cause-8: thdprhgtphhtthhopehfrdhfrghinhgvlhhlihesghhmrghilhdrtghomh X-VR-AvState: No X-VR-State: 0 X-VR-State: 0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1728 Lines: 47 On 11/09/2016 06:07 PM, Florian Fainelli wrote: > On 11/09/2016 05:24 AM, Sebastian Frias wrote: >> Hi, >> >> Documentation/networking/phy.txt discusses phy_connect and states that: >> >> "... >> >> interface is a u32 which specifies the connection type used >> between the controller and the PHY. Examples are GMII, MII, >> RGMII, and SGMII. For a full list, see include/linux/phy.h >> >> Now just make sure that phydev->supported and phydev->advertising have any >> values pruned from them which don't make sense for your controller (a 10/100 >> controller may be connected to a gigabit capable PHY, so you would need to >> mask off SUPPORTED_1000baseT*). See include/linux/ethtool.h for definitions >> for these bitfields. Note that you should not SET any bits, or the PHY may >> get put into an unsupported state. >> >> ..." >> >> However, 'drivers/net/ethernet/aurora/nb8800.c' for example, does SETs some >> bits (in function 'nb8800_pause_adv'). > > All pause/flow control related bits should be set by the Ethernet MAC > driver because this is an Ethernet MAC, not PHY, thing. See this > discussion for some details: > > https://www.mail-archive.com/netdev@vger.kernel.org/msg135347.html > > So the nb8800 drivers does the correct thing here, but the documentation > should be updated to reflect that this applies to all bits, except the > Pause capabilities because these need to come from the Ethernet MAC. > Ok, thanks. >> >> I checked 'drivers/net/ethernet/broadcom/genet/bcmmii.c' and that one CLEARs >> bits (as per the documentation). >> >> Does anybody knows what is the correct/recommended approach? > > Both drivers do correct things, they just don't set the same things here. > Thanks!