Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932190AbcKNNrV (ORCPT ); Mon, 14 Nov 2016 08:47:21 -0500 Received: from smtprelay.synopsys.com ([198.182.60.111]:54353 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752194AbcKNNrM (ORCPT ); Mon, 14 Nov 2016 08:47:12 -0500 From: Ramiro Oliveira To: mchehab@kernel.org, linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, robh+dt@kernel.org, devicetree@vger.kernel.org Cc: davem@davemloft.net, gregkh@linuxfoundation.org, geert+renesas@glider.be, akpm@linux-foundation.org, linux@roeck-us.net, hverkuil@xs4all.nl, dheitmueller@kernellabs.com, slongerbeam@gmail.com, lars@metafoo.de, robert.jarzmik@free.fr, pavel@ucw.cz, pali.rohar@gmail.com, sakari.ailus@linux.intel.com, mark.rutland@arm.com, Ramiro.Oliveira@synopsys.com, CARLOS.PALMINHA@synopsys.com Subject: [PATCH v4 1/2] Add OV5647 device tree documentation Date: Mon, 14 Nov 2016 13:46:32 +0000 Message-Id: <4b22cb1d055cdcae5cff1dd86672b6dc6a8726ce.1479129004.git.roliveir@synopsys.com> X-Mailer: git-send-email 2.10.2 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1258 Lines: 36 Add device tree documentation. Signed-off-by: Ramiro Oliveira --- .../devicetree/bindings/media/i2c/ov5647.txt | 19 +++++++++++++++++++ 1 file changed, 19 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt new file mode 100644 index 0000000..4c91b3b --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt @@ -0,0 +1,19 @@ +Omnivision OV5647 raw image sensor +--------------------------------- + +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces +and CCI (I2C compatible) control bus. + +Required properties: + +- compatible : "ovti,ov5647"; +- reg : I2C slave address of the sensor; + +The common video interfaces bindings (see video-interfaces.txt) should be +used to specify link to the image data receiver. The OV5647 device +node should contain one 'port' child node with an 'endpoint' subnode. + +Following properties are valid for the endpoint node: + +- data-lanes : (optional) specifies MIPI CSI-2 data lanes as covered in + video-interfaces.txt. The sensor supports only two data lanes. -- 2.10.2