Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932566AbcKNOEw (ORCPT ); Mon, 14 Nov 2016 09:04:52 -0500 Received: from mail-qk0-f176.google.com ([209.85.220.176]:32893 "EHLO mail-qk0-f176.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752197AbcKNOEG (ORCPT ); Mon, 14 Nov 2016 09:04:06 -0500 From: Pratyush Anand To: will.deacon@arm.com, Mark Rutland Cc: linux-arm-kernel@lists.infradead.org, labath@google.com, linux-kernel@vger.kernel.org, jan.kratochvil@redhat.com, onestero@redhat.com, Pavel Labath , Pratyush Anand Subject: [PATCH V3 3/5] arm64: hw_breakpoint: Handle inexact watchpoint addresses Date: Mon, 14 Nov 2016 19:32:44 +0530 Message-Id: X-Mailer: git-send-email 2.7.4 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 5780 Lines: 169 From: Pavel Labath Arm64 hardware does not always report a watchpoint hit address that matches one of the watchpoints set. It can also report an address "near" the watchpoint if a single instruction access both watched and unwatched addresses. There is no straight-forward way, short of disassembling the offending instruction, to map that address back to the watchpoint. Previously, when the hardware reported a watchpoint hit on an address that did not match our watchpoint (this happens in case of instructions which access large chunks of memory such as "stp") the process would enter a loop where we would be continually resuming it (because we did not recognise that watchpoint hit) and it would keep hitting the watchpoint again and again. The tracing process would never get notified of the watchpoint hit. This commit fixes the problem by looking at the watchpoints near the address reported by the hardware. If the address does not exactly match one of the watchpoints we have set, it attributes the hit to the nearest watchpoint we have. This heuristic is a bit dodgy, but I don't think we can do much more, given the hardware limitations. [panand: reworked to rebase on his patches] Signed-off-by: Pavel Labath Signed-off-by: Pratyush Anand --- arch/arm64/kernel/hw_breakpoint.c | 96 ++++++++++++++++++++++++++++----------- 1 file changed, 69 insertions(+), 27 deletions(-) diff --git a/arch/arm64/kernel/hw_breakpoint.c b/arch/arm64/kernel/hw_breakpoint.c index 3f7bc65e7ef6..f69bf368d916 100644 --- a/arch/arm64/kernel/hw_breakpoint.c +++ b/arch/arm64/kernel/hw_breakpoint.c @@ -664,11 +664,46 @@ static int breakpoint_handler(unsigned long unused, unsigned int esr, } NOKPROBE_SYMBOL(breakpoint_handler); +/* + * Arm64 hardware does not always report a watchpoint hit address that matches + * one of the watchpoints set. It can also report an address "near" the + * watchpoint if a single instruction access both watched and unwatched + * addresses. There is no straight-forward way, short of disassembling the + * offending instruction, to map that address back to the watchpoint. This + * function computes the distance of the memory access from the watchpoint as a + * heuristic for the likelyhood that a given access triggered the watchpoint. + * + * See Section D2.10.5 "Determining the memory location that caused a Watchpoint + * exception" of ARMv8 Architecture Reference Manual for details. + * + * The function returns the distance of the address from the bytes watched by + * the watchpoint. In case of an exact match, it returns 0. + */ +static u64 get_distance_from_watchpoint(unsigned long addr, u64 val, + struct arch_hw_breakpoint_ctrl *ctrl) +{ + u64 wp_low, wp_high; + u32 lens, lene; + + lens = ffs(ctrl->len) - 1; + lene = fls(ctrl->len) - 1; + + wp_low = val + lens; + wp_high = val + lene; + if (addr < wp_low) + return wp_low - addr; + else if (addr > wp_high) + return addr - wp_high; + else + return 0; +} + static int watchpoint_handler(unsigned long addr, unsigned int esr, struct pt_regs *regs) { - int i, step = 0, *kernel_step, access; - u32 ctrl_reg, lens, lene; + int i, step = 0, *kernel_step, access, closest_match = 0; + u64 min_dist = -1, dist; + u32 ctrl_reg; u64 val; struct perf_event *wp, **slots; struct debug_info *debug_info; @@ -678,31 +713,15 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr, slots = this_cpu_ptr(wp_on_reg); debug_info = ¤t->thread.debug; + /* + * Find all watchpoints that match the reported address. If no exact + * match is found. Attribute the hit to the closest watchpoint. + */ + rcu_read_lock(); for (i = 0; i < core_num_wrps; ++i) { - rcu_read_lock(); - wp = slots[i]; - if (wp == NULL) - goto unlock; - - info = counter_arch_bp(wp); - - /* Check if the watchpoint value and byte select match. */ - val = read_wb_reg(AARCH64_DBG_REG_WVR, i); - ctrl_reg = read_wb_reg(AARCH64_DBG_REG_WCR, i); - decode_ctrl_reg(ctrl_reg, &ctrl); - lens = ffs(ctrl.len) - 1; - lene = fls(ctrl.len) - 1; - /* - * FIXME: reported address can be anywhere between "the - * lowest address accessed by the memory access that - * triggered the watchpoint" and "the highest watchpointed - * address accessed by the memory access". So, it may not - * lie in the interval of watchpoint address range. - */ - if (addr < val + lens || addr > val + lene) - goto unlock; + continue; /* * Check that the access type matches. @@ -711,18 +730,41 @@ static int watchpoint_handler(unsigned long addr, unsigned int esr, access = (esr & AARCH64_ESR_ACCESS_MASK) ? HW_BREAKPOINT_W : HW_BREAKPOINT_R; if (!(access & hw_breakpoint_type(wp))) - goto unlock; + continue; + /* Check if the watchpoint value and byte select match. */ + val = read_wb_reg(AARCH64_DBG_REG_WVR, i); + ctrl_reg = read_wb_reg(AARCH64_DBG_REG_WCR, i); + decode_ctrl_reg(ctrl_reg, &ctrl); + dist = get_distance_from_watchpoint(addr, val, &ctrl); + if (dist < min_dist) { + min_dist = dist; + closest_match = i; + } + /* Is this an exact match? */ + if (dist != 0) + continue; + + info = counter_arch_bp(wp); info->trigger = addr; perf_bp_event(wp, regs); /* Do we need to handle the stepping? */ if (is_default_overflow_handler(wp)) step = 1; + } + if (min_dist > 0 && min_dist != -1) { + /* No exact match found. */ + wp = slots[closest_match]; + info = counter_arch_bp(wp); + info->trigger = addr; + perf_bp_event(wp, regs); -unlock: - rcu_read_unlock(); + /* Do we need to handle the stepping? */ + if (is_default_overflow_handler(wp)) + step = 1; } + rcu_read_unlock(); if (!step) return 0; -- 2.7.4