Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755419AbcKPLHp (ORCPT ); Wed, 16 Nov 2016 06:07:45 -0500 Received: from mail-wm0-f54.google.com ([74.125.82.54]:38152 "EHLO mail-wm0-f54.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752713AbcKPLHm (ORCPT ); Wed, 16 Nov 2016 06:07:42 -0500 From: Alexandre Bailon To: khilman@baylibre.com, robh+dt@kernel.org, b-liu@ti.com Cc: linux-kernel@vger.kernel.org, linux-usb@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, nsekhar@ti.com, Alexandre Bailon Subject: [PATCH v5 0/2] platform: Add DT support for DA8xx Date: Wed, 16 Nov 2016 12:07:34 +0100 Message-Id: <1479294456-7942-1-git-send-email-abailon@baylibre.com> X-Mailer: git-send-email 2.7.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 905 Lines: 31 This add and enable the usb otg for da850 and da850-lcdk. This series depends on "driver: dd DT support for DA8xx" patch set. If this series is applied before the "usb: musb: da8xx: Fix few issues" patch set then the usb driver will always retrun -ENODEV. Changes in v2: * Remove unrelated changes in patch 3 * Rename the device node in patch 4 Changes in v3: * Fix few mistakes in DT binding sample * Only build the device table if DT is enabled Change in v4: * Fix a nit Changes in v5: * Remove usb_phy node from d850.dtsi because it has already been merged. * Separated the patch in two: one for the board and one for the SoC. Alexandre Bailon (2): ARM: dts: da850: Add the usb otg device node ARM: dts: da850-lcdk: Enable the usb otg device node arch/arm/boot/dts/da850-lcdk.dts | 8 ++++++++ arch/arm/boot/dts/da850.dtsi | 10 ++++++++++ 2 files changed, 18 insertions(+) -- 2.7.3