Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754150AbcKPPmq (ORCPT ); Wed, 16 Nov 2016 10:42:46 -0500 Received: from mirror2.csie.ntu.edu.tw ([140.112.30.76]:36482 "EHLO wens.csie.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752360AbcKPPmh (ORCPT ); Wed, 16 Nov 2016 10:42:37 -0500 From: Chen-Yu Tsai To: Maxime Ripard , David Airlie , Archit Taneja Cc: Chen-Yu Tsai , dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-sunxi@googlegroups.com Subject: [PATCH v4 2/2] ARM: dts: sun6i: hummingbird-a31: Enable display output through VGA bridge Date: Wed, 16 Nov 2016 23:42:32 +0800 Message-Id: <20161116154232.872-3-wens@csie.org> X-Mailer: git-send-email 2.10.2 In-Reply-To: <20161116154232.872-1-wens@csie.org> References: <20161116154232.872-1-wens@csie.org> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2133 Lines: 98 The Hummingbird A31 board has a VGA DAC which converts RGB output from the LCD interface to VGA analog signals. Add nodes for the VGA DAC, its power supply, and enable this part of the display pipeline. Signed-off-by: Chen-Yu Tsai --- arch/arm/boot/dts/sun6i-a31-hummingbird.dts | 67 +++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts index 62287bd2aeb5..b168d6df2b30 100644 --- a/arch/arm/boot/dts/sun6i-a31-hummingbird.dts +++ b/arch/arm/boot/dts/sun6i-a31-hummingbird.dts @@ -63,6 +63,60 @@ stdout-path = "serial0:115200n8"; }; + vga-connector { + compatible = "vga-connector"; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_dac_out>; + }; + }; + }; + + vga-dac { + compatible = "dumb-vga-dac"; + vdd-supply = <®_vga_3v3>; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vga_dac_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&tcon0_out_vga>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + vga_dac_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + reg_vga_3v3: vga_3v3_regulator { + compatible = "regulator-fixed"; + regulator-name = "vga-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-boot-on; + enable-active-high; + gpio = <&pio 7 25 GPIO_ACTIVE_HIGH>; /* PH25 */ + }; + wifi_pwrseq: wifi_pwrseq { compatible = "mmc-pwrseq-simple"; reset-gpios = <&pio 6 10 GPIO_ACTIVE_LOW>; /* PG10 */ @@ -253,6 +307,19 @@ status = "okay"; }; +&tcon0 { + pinctrl-names = "default"; + pinctrl-0 = <&lcd0_rgb888_pins>; + status = "okay"; +}; + +&tcon0_out { + tcon0_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_dac_in>; + }; +}; + &uart0 { pinctrl-names = "default"; pinctrl-0 = <&uart0_pins_a>; -- 2.10.2