Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934060AbcKPTbe (ORCPT ); Wed, 16 Nov 2016 14:31:34 -0500 Received: from mail-it0-f52.google.com ([209.85.214.52]:37992 "EHLO mail-it0-f52.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S932269AbcKPTbc (ORCPT ); Wed, 16 Nov 2016 14:31:32 -0500 To: Andrew Morton , "linux-kernel@vger.kernel.org" Cc: linux-mm@kvack.org, "linux-block@vger.kernel.org" , Linus Torvalds , Johannes Weiner From: Jens Axboe Subject: [PATCH v3] mm: don't cap request size based on read-ahead setting Message-ID: <6e3daf1e-d333-dd40-698b-8099337ddf11@kernel.dk> Date: Wed, 16 Nov 2016 12:31:23 -0700 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.4.0 MIME-Version: 1.0 Content-Type: text/plain; charset=utf-8; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7630 Lines: 211 We ran into a funky issue, where someone doing 256K buffered reads saw 128K requests at the device level. Turns out it is read-ahead capping the request size, since we use 128K as the default setting. This doesn't make a lot of sense - if someone is issuing 256K reads, they should see 256K reads, regardless of the read-ahead setting, if the underlying device can support a 256K read in a single command. To make matters more confusing, there's an odd interaction with the fadvise hint setting. If we tell the kernel we're doing sequential IO on this file descriptor, we can get twice the read-ahead size. But if we tell the kernel that we are doing random IO, hence disabling read-ahead, we do get nice 256K requests at the lower level. This is because ondemand and forced read-ahead behave differently, with the latter doing the right thing. An application developer will be, rightfully, scratching his head at this point, wondering wtf is going on. A good one will dive into the kernel source, and silently weep. This patch introduces a bdi hint, io_pages. This is the soft max IO size for the lower level, I've hooked it up to the bdev settings here. Read-ahead is modified to issue the maximum of the user request size, and the read-ahead max size, but capped to the max request size on the device side. The latter is done to avoid reading ahead too much, if the application asks for a huge read. With this patch, the kernel behaves like the application expects. Signed-off-by: Jens Axboe --- Changes since v2: - Fix up the last minute typo on io_pages (Johannes/Hillf) - Apply the same limit to force_page_cache_readahead(). block/blk-settings.c | 1 block/blk-sysfs.c | 1 include/linux/backing-dev-defs.h | 1 mm/readahead.c | 48 ++++++++++++++++++++++++++++++--------- 4 files changed, 40 insertions(+), 11 deletions(-) diff --git a/block/blk-settings.c b/block/blk-settings.c index f679ae122843..65f16cf4f850 100644 --- a/block/blk-settings.c +++ b/block/blk-settings.c @@ -249,6 +249,7 @@ void blk_queue_max_hw_sectors(struct request_queue *q, unsigned int max_hw_secto max_sectors = min_not_zero(max_hw_sectors, limits->max_dev_sectors); max_sectors = min_t(unsigned int, max_sectors, BLK_DEF_MAX_SECTORS); limits->max_sectors = max_sectors; + q->backing_dev_info.io_pages = max_sectors >> (PAGE_SHIFT - 9); } EXPORT_SYMBOL(blk_queue_max_hw_sectors); diff --git a/block/blk-sysfs.c b/block/blk-sysfs.c index 9cc8d7c5439a..ea374e820775 100644 --- a/block/blk-sysfs.c +++ b/block/blk-sysfs.c @@ -212,6 +212,7 @@ queue_max_sectors_store(struct request_queue *q, const char *page, size_t count) spin_lock_irq(q->queue_lock); q->limits.max_sectors = max_sectors_kb << 1; + q->backing_dev_info.io_pages = max_sectors_kb >> (PAGE_SHIFT - 10); spin_unlock_irq(q->queue_lock); return ret; diff --git a/include/linux/backing-dev-defs.h b/include/linux/backing-dev-defs.h index c357f27d5483..b8144b2d59ce 100644 --- a/include/linux/backing-dev-defs.h +++ b/include/linux/backing-dev-defs.h @@ -136,6 +136,7 @@ struct bdi_writeback { struct backing_dev_info { struct list_head bdi_list; unsigned long ra_pages; /* max readahead in PAGE_SIZE units */ + unsigned long io_pages; /* max allowed IO size */ unsigned int capabilities; /* Device capabilities */ congested_fn *congested_fn; /* Function pointer if device is md/dm */ void *congested_data; /* Pointer to aux data for congested func */ diff --git a/mm/readahead.c b/mm/readahead.c index c8a955b1297e..189b09ffb3c6 100644 --- a/mm/readahead.c +++ b/mm/readahead.c @@ -202,17 +202,42 @@ int __do_page_cache_readahead(struct address_space *mapping, struct file *filp, return ret; } +static unsigned long pages_to_readahead(struct backing_dev_info *bdi, + struct file_ra_state *ra, + unsigned long req_size) +{ + /* + * If bdi->io_pages is set, that indicates the (soft) max IO size + * per command for that device. If we have that available, use + * that as the max suitable read-ahead size for this IO. Instead of + * capping read-ahead at ra_pages if req_size is larger, we can go + * up to io_pages. If io_pages isn't set, fall back to using + * ra_pages as a safe max. + */ + if (bdi->io_pages) { + unsigned long ret; + + ret = max_t(unsigned long, ra->ra_pages, req_size); + return min(bdi->io_pages, ret); + } + + return ra->ra_pages; +} + /* * Chunk the readahead into 2 megabyte units, so that we don't pin too much * memory at once. */ int force_page_cache_readahead(struct address_space *mapping, struct file *filp, - pgoff_t offset, unsigned long nr_to_read) + pgoff_t offset, unsigned long nr_to_read) { + struct backing_dev_info *bdi = inode_to_bdi(mapping->host); + struct file_ra_state *ra = &filp->f_ra; + if (unlikely(!mapping->a_ops->readpage && !mapping->a_ops->readpages)) return -EINVAL; - nr_to_read = min(nr_to_read, inode_to_bdi(mapping->host)->ra_pages); + nr_to_read = pages_to_readahead(bdi, ra, nr_to_read); while (nr_to_read) { int err; @@ -369,7 +394,8 @@ ondemand_readahead(struct address_space *mapping, bool hit_readahead_marker, pgoff_t offset, unsigned long req_size) { - unsigned long max = ra->ra_pages; + struct backing_dev_info *bdi = inode_to_bdi(mapping->host); + unsigned long max_pages = pages_to_readahead(bdi, ra, req_size); pgoff_t prev_offset; /* @@ -385,7 +411,7 @@ ondemand_readahead(struct address_space *mapping, if ((offset == (ra->start + ra->size - ra->async_size) || offset == (ra->start + ra->size))) { ra->start += ra->size; - ra->size = get_next_ra_size(ra, max); + ra->size = get_next_ra_size(ra, max_pages); ra->async_size = ra->size; goto readit; } @@ -400,16 +426,16 @@ ondemand_readahead(struct address_space *mapping, pgoff_t start; rcu_read_lock(); - start = page_cache_next_hole(mapping, offset + 1, max); + start = page_cache_next_hole(mapping, offset + 1, max_pages); rcu_read_unlock(); - if (!start || start - offset > max) + if (!start || start - offset > max_pages) return 0; ra->start = start; ra->size = start - offset; /* old async_size */ ra->size += req_size; - ra->size = get_next_ra_size(ra, max); + ra->size = get_next_ra_size(ra, max_pages); ra->async_size = ra->size; goto readit; } @@ -417,7 +443,7 @@ ondemand_readahead(struct address_space *mapping, /* * oversize read */ - if (req_size > max) + if (req_size > max_pages) goto initial_readahead; /* @@ -433,7 +459,7 @@ ondemand_readahead(struct address_space *mapping, * Query the page cache and look for the traces(cached history pages) * that a sequential stream would leave behind. */ - if (try_context_readahead(mapping, ra, offset, req_size, max)) + if (try_context_readahead(mapping, ra, offset, req_size, max_pages)) goto readit; /* @@ -444,7 +470,7 @@ ondemand_readahead(struct address_space *mapping, initial_readahead: ra->start = offset; - ra->size = get_init_ra_size(req_size, max); + ra->size = get_init_ra_size(req_size, max_pages); ra->async_size = ra->size > req_size ? ra->size - req_size : ra->size; readit: @@ -454,7 +480,7 @@ ondemand_readahead(struct address_space *mapping, * the resulted next readahead window into the current one. */ if (offset == ra->start && ra->size == ra->async_size) { - ra->async_size = get_next_ra_size(ra, max); + ra->async_size = get_next_ra_size(ra, max_pages); ra->size += ra->async_size; } -- Jens Axboe