Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752106AbcKRFRE (ORCPT ); Fri, 18 Nov 2016 00:17:04 -0500 Received: from mx2.suse.de ([195.135.220.15]:42128 "EHLO mx2.suse.de" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751989AbcKRFRA (ORCPT ); Fri, 18 Nov 2016 00:17:00 -0500 From: NeilBrown To: Shaohua Li Date: Fri, 18 Nov 2016 16:16:11 +1100 Subject: [md PATCH 1/6] md/failfast: add failfast flag for md to be used by some personalities. Cc: linux-raid@vger.kernel.org, linux-block@vger.kernel.org, Christoph Hellwig , linux-kernel@vger.kernel.org, hare@suse.de Message-ID: <147944617143.3302.17138878373669282315.stgit@noble> In-Reply-To: <147944614789.3302.1959091446949640579.stgit@noble> References: <147944614789.3302.1959091446949640579.stgit@noble> User-Agent: StGit/0.17.1-dirty MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 7235 Lines: 175 This patch just adds a 'failfast' per-device flag which can be stored in v0.90 or v1.x metadata. The flag is not used yet but the intent is that it can be used for mirrored (raid1/raid10) arrays where low latency is more important than keeping all devices on-line. Setting the flag for a device effectively gives permission for that device to be marked as Faulty and excluded from the array on the first error. The underlying driver will be directed not to retry requests that result in failures. There is a proviso that the device must not be marked faulty if that would cause the array as a whole to fail, it may only be marked Faulty if the array remains functional, but is degraded. Failures on read requests will cause the device to be marked as Faulty immediately so that further reads will avoid that device. No attempt will be made to correct read errors by over-writing with the correct data. It is expected that if transient errors, such as cable unplug, are possible, then something in user-space will revalidate failed devices and re-add them when they appear to be working again. Signed-off-by: NeilBrown --- drivers/md/md.c | 27 +++++++++++++++++++++++++++ drivers/md/md.h | 6 ++++++ include/uapi/linux/raid/md_p.h | 7 ++++++- 3 files changed, 39 insertions(+), 1 deletion(-) diff --git a/drivers/md/md.c b/drivers/md/md.c index 1f1c7f007b68..0d1a9fd9d1c1 100644 --- a/drivers/md/md.c +++ b/drivers/md/md.c @@ -1163,6 +1163,8 @@ static int super_90_validate(struct mddev *mddev, struct md_rdev *rdev) } if (desc->state & (1<flags); + if (desc->state & (1<flags); } else /* MULTIPATH are always insync */ set_bit(In_sync, &rdev->flags); return 0; @@ -1288,6 +1290,8 @@ static void super_90_sync(struct mddev *mddev, struct md_rdev *rdev) } if (test_bit(WriteMostly, &rdev2->flags)) d->state |= (1<flags)) + d->state |= (1<raid_disks ; i++) { @@ -1672,6 +1676,8 @@ static int super_1_validate(struct mddev *mddev, struct md_rdev *rdev) } if (sb->devflags & WriteMostly1) set_bit(WriteMostly, &rdev->flags); + if (sb->devflags & FailFast1) + set_bit(FailFast, &rdev->flags); if (le32_to_cpu(sb->feature_map) & MD_FEATURE_REPLACEMENT) set_bit(Replacement, &rdev->flags); } else /* MULTIPATH are always insync */ @@ -1710,6 +1716,10 @@ static void super_1_sync(struct mddev *mddev, struct md_rdev *rdev) sb->chunksize = cpu_to_le32(mddev->chunk_sectors); sb->level = cpu_to_le32(mddev->level); sb->layout = cpu_to_le32(mddev->layout); + if (test_bit(FailFast, &rdev->flags)) + sb->devflags |= FailFast1; + else + sb->devflags &= ~FailFast1; if (test_bit(WriteMostly, &rdev->flags)) sb->devflags |= WriteMostly1; @@ -2554,6 +2564,8 @@ state_show(struct md_rdev *rdev, char *page) len += sprintf(page+len, "replacement%s", sep); if (test_bit(ExternalBbl, &flags)) len += sprintf(page+len, "external_bbl%s", sep); + if (test_bit(FailFast, &flags)) + len += sprintf(page+len, "failfast%s", sep); if (len) len -= strlen(sep); @@ -2576,6 +2588,7 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len) * so that it gets rebuilt based on bitmap * write_error - sets WriteErrorSeen * -write_error - clears WriteErrorSeen + * {,-}failfast - set/clear FailFast */ int err = -EINVAL; if (cmd_match(buf, "faulty") && rdev->mddev->pers) { @@ -2634,6 +2647,12 @@ state_store(struct md_rdev *rdev, const char *buf, size_t len) } else if (cmd_match(buf, "insync") && rdev->raid_disk == -1) { set_bit(In_sync, &rdev->flags); err = 0; + } else if (cmd_match(buf, "failfast")) { + set_bit(FailFast, &rdev->flags); + err = 0; + } else if (cmd_match(buf, "-failfast")) { + clear_bit(FailFast, &rdev->flags); + err = 0; } else if (cmd_match(buf, "-insync") && rdev->raid_disk >= 0 && !test_bit(Journal, &rdev->flags)) { if (rdev->mddev->pers == NULL) { @@ -5939,6 +5958,8 @@ static int get_disk_info(struct mddev *mddev, void __user * arg) info.state |= (1<flags)) info.state |= (1<flags)) + info.state |= (1<flags); else clear_bit(WriteMostly, &rdev->flags); + if (info->state & (1<flags); + else + clear_bit(FailFast, &rdev->flags); if (info->state & (1<state & (1<flags); + if (info->state & (1<flags); if (!mddev->persistent) { pr_debug("md: nonpersistent superblock ...\n"); diff --git a/drivers/md/md.h b/drivers/md/md.h index af6b33c30d2d..bc6712ef8c81 100644 --- a/drivers/md/md.h +++ b/drivers/md/md.h @@ -171,6 +171,12 @@ enum flag_bits { ExternalBbl, /* External metadata provides bad * block management for a disk */ + FailFast, /* Minimal retries should be attempted on + * this device, so use REQ_FAILFAST_DEV. + * Also don't try to repair failed reads. + * It is expects that no bad block log + * is present. + */ }; static inline int is_badblock(struct md_rdev *rdev, sector_t s, int sectors, diff --git a/include/uapi/linux/raid/md_p.h b/include/uapi/linux/raid/md_p.h index c3e654c6d518..9930f3e9040f 100644 --- a/include/uapi/linux/raid/md_p.h +++ b/include/uapi/linux/raid/md_p.h @@ -84,6 +84,10 @@ #define MD_DISK_CANDIDATE 5 /* disk is added as spare (local) until confirmed * For clustered enviroments only. */ +#define MD_DISK_FAILFAST 10 /* Send REQ_FAILFAST if there are multiple + * devices available - and don't try to + * correct read errors. + */ #define MD_DISK_WRITEMOSTLY 9 /* disk is "write-mostly" is RAID1 config. * read requests will only be sent here in @@ -265,8 +269,9 @@ struct mdp_superblock_1 { __le32 dev_number; /* permanent identifier of this device - not role in raid */ __le32 cnt_corrected_read; /* number of read errors that were corrected by re-writing */ __u8 device_uuid[16]; /* user-space setable, ignored by kernel */ - __u8 devflags; /* per-device flags. Only one defined...*/ + __u8 devflags; /* per-device flags. Only two defined...*/ #define WriteMostly1 1 /* mask for writemostly flag in above */ +#define FailFast1 2 /* Should avoid retries and fixups and just fail */ /* Bad block log. If there are any bad blocks the feature flag is set. * If offset and size are non-zero, that space is reserved and available */