Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754570AbcKRPRw (ORCPT ); Fri, 18 Nov 2016 10:17:52 -0500 Received: from mail-qk0-f169.google.com ([209.85.220.169]:36674 "EHLO mail-qk0-f169.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754531AbcKRPRq (ORCPT ); Fri, 18 Nov 2016 10:17:46 -0500 From: Olimpiu Dejeu To: robh@kernel.org Cc: lee.jones@linaro.org, linux-kernel@vger.kernel.org, linux-fbdev@vger.kernel.org, devicetree@vger.kernel.org, jingoohan1@gmail.com, Olimpiu Dejeu Subject: [PATCH 2/2] backlight: arcxcnn: devicetree bindings for ArticSand devices Date: Fri, 18 Nov 2016 10:17:41 -0500 Message-Id: <1479482261-19072-1-git-send-email-olimpiu@arcticsand.com> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1900 Lines: 54 Re-submission of arcxcnn backlight driver addressing the naming convention concerns raised by Rob H. Note that all the device tree properties are determined by the board design or IC EPROM settings and are not intended to be user adjustable. Acked-by: Rob Herring Signed-off-by: Olimpiu Dejeu --- .../bindings/leds/backlight/arcxcnn_bl.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt diff --git a/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt new file mode 100644 index 0000000..a7b6ff2 --- /dev/null +++ b/Documentation/devicetree/bindings/leds/backlight/arcxcnn_bl.txt @@ -0,0 +1,33 @@ +Binding for ArcticSand arc2c0608 LED driver + +Required properties: +- compatible: should be "arc,arc2c0608" +- reg: slave address + +Optional properties: +- default-brightness: brightness value on boot, value from: 0-4095 +- label: The name of the backlight device + See Documentation/devicetree/bindings/leds/common.txt +- led-sources: List of enabled channels from 0 to 5. + See Documentation/devicetree/bindings/leds/common.txt + +- arc,led-config-0: setting for register ILED_CONFIG_0 +- arc,led-config-1: setting for register ILED_CONFIG_1 +- arc,dim-freq: PWM mode frequence setting (bits [3:0] used) +- arc,comp-config: setting for register CONFIG_COMP +- arc,filter-config: setting for register FILTER_CONFIG +- arc,trim-config: setting for register IMAXTUNE + +Note: Optional properties not specified will default to values in IC EPROM + +Example: + +arc2c0608@30 { + compatible = "arc,arc2c0608"; + reg = <0x30>; + default-brightness = <500>; + label = "lcd-backlight"; + linux,default-trigger = "backlight"; + led-sources = <0 1 2 5>; +}; + -- 2.7.4