From: Marcel Ziswiler <marcel.ziswiler@toradex.com>
To: devicetree@vger.kernel.org
Cc: Marcel Ziswiler <marcel.ziswiler@toradex.com>,
        Thierry Reding <thierry.reding@gmail.com>,
        linux-kernel@vger.kernel.org, Stephen Warren <swarren@wwwdotorg.org>,
        Rob Herring <robh+dt@kernel.org>, linux-tegra@vger.kernel.org,
        Mark Rutland <mark.rutland@arm.com>,
        Alexandre Courbot <gnurou@gmail.com>,
        Russell King <linux@armlinux.org.uk>,
        linux-arm-kernel@lists.infradead.org
Subject: [PATCH 1/6] apalis-tk1: remove spurious new lines
Date: Tue, 22 Nov 2016 01:14:02 +0100
Message-Id: <1479773647-14726-2-git-send-email-marcel.ziswiler@toradex.com>
In-Reply-To: <1479773647-14726-1-git-send-email-marcel.ziswiler@toradex.com>
References: <1479773647-14726-1-git-send-email-marcel.ziswiler@toradex.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 2705
Lines: 107

Remove some spurious new lines.

Signed-off-by: Marcel Ziswiler <marcel.ziswiler@toradex.com>
---

 arch/arm/boot/dts/tegra124-apalis-eval.dts |  1 -
 arch/arm/boot/dts/tegra124-apalis.dtsi     | 12 ------------
 2 files changed, 13 deletions(-)

diff --git a/arch/arm/boot/dts/tegra124-apalis-eval.dts b/arch/arm/boot/dts/tegra124-apalis-eval.dts
index 653044a..2b5a0f3 100644
--- a/arch/arm/boot/dts/tegra124-apalis-eval.dts
+++ b/arch/arm/boot/dts/tegra124-apalis-eval.dts
@@ -232,7 +232,6 @@
 
 	backlight: backlight {
 		compatible = "pwm-backlight";
-
 		/* BKL1_PWM */
 		pwms = <&pwm 3 5000000>;
 		brightness-levels = <255 231 223 207 191 159 127 0>;
diff --git a/arch/arm/boot/dts/tegra124-apalis.dtsi b/arch/arm/boot/dts/tegra124-apalis.dtsi
index 0819721..6aa4952 100644
--- a/arch/arm/boot/dts/tegra124-apalis.dtsi
+++ b/arch/arm/boot/dts/tegra124-apalis.dtsi
@@ -56,7 +56,6 @@
 
 	pcie-controller@01003000 {
 		status = "okay";
-
 		avddio-pex-supply = <&vdd_1v05>;
 		avdd-pex-pll-supply = <&vdd_1v05>;
 		avdd-pll-erefe-supply = <&avdd_1v05>;
@@ -85,7 +84,6 @@
 		hdmi@54280000 {
 			pll-supply = <&reg_1v05_avdd_hdmi_pll>;
 			vdd-supply = <&reg_3v3_avdd_hdmi>;
-
 			nvidia,ddc-i2c-bus = <&hdmi_ddc>;
 			nvidia,hpd-gpio =
 				<&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
@@ -1607,15 +1605,11 @@
 			compatible = "ams,as3722";
 			reg = <0x40>;
 			interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
-
 			ams,system-power-controller;
-
 			#interrupt-cells = <2>;
 			interrupt-controller;
-
 			gpio-controller;
 			#gpio-cells = <2>;
-
 			pinctrl-names = "default";
 			pinctrl-0 = <&as3722_default>;
 
@@ -1790,7 +1784,6 @@
 			reg = <0x4c>;
 			interrupt-parent = <&gpio>;
 			interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
-
 			#thermal-sensor-cells = <1>;
 		};
 	};
@@ -1823,7 +1816,6 @@
 	sata@70020000 {
 		phys = <&{/padctl@7009f000/pads/sata/lanes/sata-0}>;
 		phy-names = "sata-0";
-
 		avdd-supply = <&vdd_1v05>;
 		hvdd-supply = <&reg_3v3>;
 		vddio-supply = <&vdd_1v05>;
@@ -1837,7 +1829,6 @@
 		       <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>,
 		       <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>;
 		phy-names = "usb2-0", "usb3-1", "usb2-1", "usb2-2", "usb3-0";
-
 		avddio-pex-supply = <&vdd_1v05>;
 		avdd-pll-erefe-supply = <&avdd_1v05>;
 		avdd-pll-utmip-supply = <&vddio_1v8>;
@@ -1919,7 +1910,6 @@
 			usb2-0 {
 				status = "okay";
 				mode = "otg";
-
 				vbus-supply = <&reg_usbo1_vbus>;
 			};
 
@@ -1927,7 +1917,6 @@
 			usb2-1 {
 				status = "okay";
 				mode = "host";
-
 				vbus-supply = <&reg_usbh_vbus>;
 			};
 
@@ -1935,7 +1924,6 @@
 			usb2-2 {
 				status = "okay";
 				mode = "host";
-
 				vbus-supply = <&reg_usbh_vbus>;
 			};
 
-- 
2.5.5