Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755400AbcKVMDA (ORCPT ); Tue, 22 Nov 2016 07:03:00 -0500 Received: from smtp.codeaurora.org ([198.145.29.96]:47030 "EHLO smtp.codeaurora.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752864AbcKVMC6 (ORCPT ); Tue, 22 Nov 2016 07:02:58 -0500 DMARC-Filter: OpenDMARC Filter v1.3.1 smtp.codeaurora.org 241A4614F9 Authentication-Results: pdx-caf-mail.web.codeaurora.org; dmarc=none header.from=codeaurora.org Authentication-Results: pdx-caf-mail.web.codeaurora.org; spf=pass smtp.mailfrom=vivek.gautam@codeaurora.org From: Vivek Gautam To: kishon@ti.com, robh+dt@kernel.org, mark.rutland@arm.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org Cc: srinivas.kandagatla@linaro.org, sboyd@codeaurora.org, linux-arm-msm@vger.kernel.org, Vivek Gautam Subject: [PATCH v2 0/4] phy: USB and PCIe phy drivers for Qcom chipsets Date: Tue, 22 Nov 2016 17:32:39 +0530 Message-Id: <1479816163-5260-1-git-send-email-vivek.gautam@codeaurora.org> X-Mailer: git-send-email 1.9.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2318 Lines: 49 This patch series adds couple of PHY drivers for Qualcomm chipsets. a) qcom-qusb2 phy driver: that provides High Speed USB functionality. b) qcom-qmp phy driver: that is a combo phy providing support for USB3, PCIe and UFS controllers.[1] The patches are based on next branch of linux-phy tree. These have been tested on Dragon board db820c hardware with required set of patches on integration tree maintained by Linaro landing team for Qualcomm [2]. The QUSB2 phy driver is also based on qfprom patch [3]: [PATCH v2] nvmem: qfprom: Allow single byte accesses for read/write Changes since v1: - Moved device tree binding documentation to separate patches, as suggested by Rob. - Addressed review comment from Rob, regarding qfprom accesses by qusb2 phy driver, given by Rob. - Addressed review comments from Kishon. - Addressed review comments from Srinivas for QMP phy driver. - Addressed kbuild warning. - Please see patches 2 & 4 in the series for details on changes in v2. [1] Currently the qcom-qmp phy driver supports only USB3 and PCIe controllers. Later, we plan to add the UFS phy support as well to this. [2] https://git.linaro.org/?p=landing-teams/working/qualcomm/kernel.git;a=shortlog;h=refs/heads/integration-linux-qcomlt [3] https://lkml.org/lkml/2016/11/17/21 Vivek Gautam (4): dt-bindings: phy: Add support for QUSB2 phy phy: qcom-qusb2: New driver for QUSB2 PHY on Qcom chips dt-bindings: phy: Add support for QMP phy phy: qcom-qmp: new qmp phy driver for qcom-chipsets .../devicetree/bindings/phy/qcom-qmp-phy.txt | 74 ++ .../devicetree/bindings/phy/qcom-qusb2-phy.txt | 55 + drivers/phy/Kconfig | 20 + drivers/phy/Makefile | 2 + drivers/phy/phy-qcom-qmp.c | 1141 ++++++++++++++++++++ drivers/phy/phy-qcom-qusb2.c | 549 ++++++++++ 6 files changed, 1841 insertions(+) create mode 100644 Documentation/devicetree/bindings/phy/qcom-qmp-phy.txt create mode 100644 Documentation/devicetree/bindings/phy/qcom-qusb2-phy.txt create mode 100644 drivers/phy/phy-qcom-qmp.c create mode 100644 drivers/phy/phy-qcom-qusb2.c -- The Qualcomm Innovation Center, Inc. is a member of the Code Aurora Forum, a Linux Foundation Collaborative Project