Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933616AbcKVR2A (ORCPT ); Tue, 22 Nov 2016 12:28:00 -0500 Received: from mezzanine.sirena.org.uk ([106.187.55.193]:41444 "EHLO mezzanine.sirena.org.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933442AbcKVR1K (ORCPT ); Tue, 22 Nov 2016 12:27:10 -0500 From: Mark Brown To: Sanchayan Maity Cc: Mark Brown , broonie@kernel.org, stefan@agner.ch, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, linux-spi@vger.kernel.org In-Reply-To: Message-Id: Date: Tue, 22 Nov 2016 17:26:49 +0000 X-SA-Exim-Connect-IP: 2001:470:1f1d:6b5::3 X-SA-Exim-Mail-From: broonie@sirena.org.uk Subject: Applied "spi: spi-fsl-dspi: Fix continuous selection format" to the spi tree X-SA-Exim-Version: 4.2.1 (built Mon, 26 Dec 2011 16:24:06 +0000) X-SA-Exim-Scanned: No (on mezzanine.sirena.org.uk); Unknown failure Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3406 Lines: 99 The patch spi: spi-fsl-dspi: Fix continuous selection format has been applied to the spi tree at git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi.git All being well this means that it will be integrated into the linux-next tree (usually sometime in the next 24 hours) and sent to Linus during the next merge window (or sooner if it is a bug fix), however if problems are discovered then the patch may be dropped or reverted. You may get further e-mails resulting from automated or manual testing and review of the tree, please engage with people reporting problems and send followup patches addressing any issues that are reported if needed. If any updates are required or you are submitting further changes they should be sent as incremental updates against current git, existing patches will not be replaced. Please add any relevant lists and maintainers to the CCs when replying to this mail. Thanks, Mark >From ccf7d8ee3d6eb600338a184e9a192ec1d5aee924 Mon Sep 17 00:00:00 2001 From: Sanchayan Maity Date: Tue, 22 Nov 2016 12:31:31 +0530 Subject: [PATCH] spi: spi-fsl-dspi: Fix continuous selection format Current DMA implementation was not handling the continuous selection format viz. SPI chip select would be deasserted even between sequential serial transfers. Use existing dspi_data_to_pushr function to restructure the transmit code path and set or reset the CONT bit on same lines as code path in EOQ mode does. This correctly implements continuous selection format while also correcting and cleaning up the transmit code path. Signed-off-by: Sanchayan Maity Signed-off-by: Mark Brown --- drivers/spi/spi-fsl-dspi.c | 20 ++++++-------------- 1 file changed, 6 insertions(+), 14 deletions(-) diff --git a/drivers/spi/spi-fsl-dspi.c b/drivers/spi/spi-fsl-dspi.c index cb41c327bd77..7ada112bfd85 100644 --- a/drivers/spi/spi-fsl-dspi.c +++ b/drivers/spi/spi-fsl-dspi.c @@ -196,6 +196,8 @@ struct fsl_dspi { struct fsl_dspi_dma *dma; }; +static u32 dspi_data_to_pushr(struct fsl_dspi *dspi, int tx_word); + static inline int is_double_byte_mode(struct fsl_dspi *dspi) { unsigned int val; @@ -242,24 +244,15 @@ static int dspi_next_xfer_dma_submit(struct fsl_dspi *dspi) int time_left; int tx_word; int i; - u16 val; tx_word = is_double_byte_mode(dspi); - for (i = 0; i < dma->curr_xfer_len - 1; i++) { - val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx; - dspi->dma->tx_dma_buf[i] = - SPI_PUSHR_TXDATA(val) | SPI_PUSHR_PCS(dspi->cs) | - SPI_PUSHR_CTAS(0) | SPI_PUSHR_CONT; - dspi->tx += tx_word + 1; + for (i = 0; i < dma->curr_xfer_len; i++) { + dspi->dma->tx_dma_buf[i] = dspi_data_to_pushr(dspi, tx_word); + if ((dspi->cs_change) && (!dspi->len)) + dspi->dma->tx_dma_buf[i] &= ~SPI_PUSHR_CONT; } - val = tx_word ? *(u16 *) dspi->tx : *(u8 *) dspi->tx; - dspi->dma->tx_dma_buf[i] = SPI_PUSHR_TXDATA(val) | - SPI_PUSHR_PCS(dspi->cs) | - SPI_PUSHR_CTAS(0); - dspi->tx += tx_word + 1; - dma->tx_desc = dmaengine_prep_slave_single(dma->chan_tx, dma->tx_dma_phys, dma->curr_xfer_len * @@ -351,7 +344,6 @@ static int dspi_dma_xfer(struct fsl_dspi *dspi) curr_remaining_bytes -= dma->curr_xfer_len * word; if (curr_remaining_bytes < 0) curr_remaining_bytes = 0; - dspi->len = curr_remaining_bytes; } } -- 2.10.2