Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755667AbcKWClY (ORCPT ); Tue, 22 Nov 2016 21:41:24 -0500 Received: from mail-pg0-f51.google.com ([74.125.83.51]:35761 "EHLO mail-pg0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755280AbcKWClW (ORCPT ); Tue, 22 Nov 2016 21:41:22 -0500 From: Brian Norris To: Amitkumar Karwar , Nishant Sarmukadam Cc: , Kalle Valo , linux-wireless@vger.kernel.org, Cathy Luo , Dmitry Torokhov , Brian Norris Subject: [PATCH] mwifiex: pcie: implement timeout loop for FW programming doorbell Date: Tue, 22 Nov 2016 18:39:45 -0800 Message-Id: <1479868785-16263-1-git-send-email-briannorris@chromium.org> X-Mailer: git-send-email 2.8.0.rc3.226.g39d4020 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2165 Lines: 57 Marvell Wifi PCIe modules don't always behave nicely for PCIe power management when their firmware hasn't been loaded, particularly after suspending the PCIe link one or more times. When this happens, we might end up spinning forever in this status-polling tight loop. Let's make this less tight by adding a timeout and by sleeping a bit in between reads, as we do with the other similar loops. This prevents us from hogging a CPU even in such pathological cases, and allows the FW initialization to just fail gracefully instead. I chose the same polling parameters as the earlier loop in this function, and empirically, I found that this loop never makes it more than about 12 cycles in a sane FW init sequence. I had no official information on the actual intended latency for this portion of the download. Signed-off-by: Brian Norris --- drivers/net/wireless/marvell/mwifiex/pcie.c | 16 +++++++++++++--- 1 file changed, 13 insertions(+), 3 deletions(-) diff --git a/drivers/net/wireless/marvell/mwifiex/pcie.c b/drivers/net/wireless/marvell/mwifiex/pcie.c index 4b89f557d0b6..9f9ea1350591 100644 --- a/drivers/net/wireless/marvell/mwifiex/pcie.c +++ b/drivers/net/wireless/marvell/mwifiex/pcie.c @@ -2050,7 +2050,7 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, } /* Wait for the command done interrupt */ - do { + for (tries = 0; tries < MAX_POLL_TRIES; tries++) { if (mwifiex_read_reg(adapter, PCIE_CPU_INT_STATUS, &ireg_intr)) { mwifiex_dbg(adapter, ERROR, @@ -2062,8 +2062,18 @@ static int mwifiex_prog_fw_w_helper(struct mwifiex_adapter *adapter, ret = -1; goto done; } - } while ((ireg_intr & CPU_INTR_DOOR_BELL) == - CPU_INTR_DOOR_BELL); + if (!(ireg_intr & CPU_INTR_DOOR_BELL)) + break; + usleep_range(10, 20); + } + if (ireg_intr & CPU_INTR_DOOR_BELL) { + mwifiex_dbg(adapter, ERROR, "%s: Card failed to ACK download\n", + __func__); + mwifiex_unmap_pci_memory(adapter, skb, + PCI_DMA_TODEVICE); + ret = -1; + goto done; + } mwifiex_unmap_pci_memory(adapter, skb, PCI_DMA_TODEVICE); -- 2.8.0.rc3.226.g39d4020