Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S935054AbcKWTmu (ORCPT ); Wed, 23 Nov 2016 14:42:50 -0500 Received: from szxga03-in.huawei.com ([119.145.14.66]:64795 "EHLO szxga03-in.huawei.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934219AbcKWTms (ORCPT ); Wed, 23 Nov 2016 14:42:48 -0500 From: Salil Mehta To: CC: , , , , , , , , , Subject: [PATCH V3 for-next 05/11] IB/hns: Modify the condition of notifying hardware loopback Date: Wed, 23 Nov 2016 19:41:03 +0000 Message-ID: <20161123194109.420760-6-salil.mehta@huawei.com> X-Mailer: git-send-email 2.8.3 In-Reply-To: <20161123194109.420760-1-salil.mehta@huawei.com> References: <20161123194109.420760-1-salil.mehta@huawei.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.203.181.153] X-CFilter-Loop: Reflected Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2210 Lines: 58 From: Lijun Ou This patch modified the condition of notifying hardware loopback. In hip06, RoCE Engine has several ports, one QP is related to one port. hardware only support loopback in the same port, not in the different ports. So, If QP related to port N, the dmac in the QP context equals the smac of the local port N or the loop_idc is 1, we should set loopback bit in QP context to notify hardware. Signed-off-by: Wei Hu (Xavier) Signed-off-by: Lijun Ou Signed-off-by: Salil Mehta --- drivers/infiniband/hw/hns/hns_roce_hw_v1.c | 24 +++++++----------------- 1 file changed, 7 insertions(+), 17 deletions(-) diff --git a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c index e080dd6..643a2ff 100644 --- a/drivers/infiniband/hw/hns/hns_roce_hw_v1.c +++ b/drivers/infiniband/hw/hns/hns_roce_hw_v1.c @@ -2244,24 +2244,14 @@ static int hns_roce_v1_m_qp(struct ib_qp *ibqp, const struct ib_qp_attr *attr, QP_CONTEXT_QPC_BYTE_32_SIGNALING_TYPE_S, hr_qp->sq_signal_bits); - for (port = 0; port < hr_dev->caps.num_ports; port++) { - smac = (u8 *)hr_dev->dev_addr[port]; - dev_dbg(dev, "smac: %2x: %2x: %2x: %2x: %2x: %2x\n", - smac[0], smac[1], smac[2], smac[3], smac[4], - smac[5]); - if ((dmac[0] == smac[0]) && (dmac[1] == smac[1]) && - (dmac[2] == smac[2]) && (dmac[3] == smac[3]) && - (dmac[4] == smac[4]) && (dmac[5] == smac[5])) { - roce_set_bit(context->qpc_bytes_32, - QP_CONTEXT_QPC_BYTE_32_LOOPBACK_INDICATOR_S, - 1); - break; - } - } - - if (hr_dev->loop_idc == 0x1) + port = (attr_mask & IB_QP_PORT) ? (attr->port_num - 1) : + hr_qp->port; + smac = (u8 *)hr_dev->dev_addr[port]; + /* when dmac equals smac or loop_idc is 1, it should loopback */ + if (ether_addr_equal_unaligned(dmac, smac) || + hr_dev->loop_idc == 0x1) roce_set_bit(context->qpc_bytes_32, - QP_CONTEXT_QPC_BYTE_32_LOOPBACK_INDICATOR_S, 1); + QP_CONTEXT_QPC_BYTE_32_LOOPBACK_INDICATOR_S, 1); roce_set_bit(context->qpc_bytes_32, QP_CONTEXT_QPC_BYTE_32_GLOBAL_HEADER_S, -- 1.7.9.5