Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S965504AbcKXLi5 (ORCPT ); Thu, 24 Nov 2016 06:38:57 -0500 Received: from mail-pg0-f49.google.com ([74.125.83.49]:36857 "EHLO mail-pg0-f49.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S965515AbcKXLgo (ORCPT ); Thu, 24 Nov 2016 06:36:44 -0500 From: Viresh Kumar To: Rafael Wysocki , nm@ti.com, sboyd@codeaurora.org, Viresh Kumar Cc: linaro-kernel@lists.linaro.org, linux-pm@vger.kernel.org, linux-kernel@vger.kernel.org, Vincent Guittot , robh@kernel.org, d-gerlach@ti.com, broonie@kernel.org, devicetree@vger.kernel.org, Viresh Kumar Subject: [PATCH V4 05/10] PM / OPP: Pass struct dev_pm_opp_supply to _set_opp_voltage() Date: Thu, 24 Nov 2016 17:06:14 +0530 Message-Id: X-Mailer: git-send-email 2.7.1.410.g6faf27b In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3645 Lines: 111 Pass the entire supply structure instead of all of its fields. Signed-off-by: Viresh Kumar Tested-by: Dave Gerlach --- drivers/base/power/opp/core.c | 44 +++++++++++++++++-------------------------- 1 file changed, 17 insertions(+), 27 deletions(-) diff --git a/drivers/base/power/opp/core.c b/drivers/base/power/opp/core.c index 8d6006151c9a..37fad2eb0f47 100644 --- a/drivers/base/power/opp/core.c +++ b/drivers/base/power/opp/core.c @@ -542,8 +542,7 @@ static struct clk *_get_opp_clk(struct device *dev) } static int _set_opp_voltage(struct device *dev, struct regulator *reg, - unsigned long u_volt, unsigned long u_volt_min, - unsigned long u_volt_max) + struct dev_pm_opp_supply *supply) { int ret; @@ -554,14 +553,15 @@ static int _set_opp_voltage(struct device *dev, struct regulator *reg, return 0; } - dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, u_volt_min, - u_volt, u_volt_max); + dev_dbg(dev, "%s: voltages (mV): %lu %lu %lu\n", __func__, + supply->u_volt_min, supply->u_volt, supply->u_volt_max); - ret = regulator_set_voltage_triplet(reg, u_volt_min, u_volt, - u_volt_max); + ret = regulator_set_voltage_triplet(reg, supply->u_volt_min, + supply->u_volt, supply->u_volt_max); if (ret) dev_err(dev, "%s: failed to set voltage (%lu %lu %lu mV): %d\n", - __func__, u_volt_min, u_volt, u_volt_max, ret); + __func__, supply->u_volt_min, supply->u_volt, + supply->u_volt_max, ret); return ret; } @@ -583,8 +583,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) struct regulator *reg; struct clk *clk; unsigned long freq, old_freq; - unsigned long u_volt, u_volt_min, u_volt_max; - unsigned long old_u_volt, old_u_volt_min, old_u_volt_max; + struct dev_pm_opp_supply old_supply, new_supply; int ret; if (unlikely(!target_freq)) { @@ -634,17 +633,12 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) return ret; } - if (IS_ERR(old_opp)) { - old_u_volt = 0; - } else { - old_u_volt = old_opp->supply.u_volt; - old_u_volt_min = old_opp->supply.u_volt_min; - old_u_volt_max = old_opp->supply.u_volt_max; - } + if (IS_ERR(old_opp)) + old_supply.u_volt = 0; + else + memcpy(&old_supply, &old_opp->supply, sizeof(old_supply)); - u_volt = opp->supply.u_volt; - u_volt_min = opp->supply.u_volt_min; - u_volt_max = opp->supply.u_volt_max; + memcpy(&new_supply, &opp->supply, sizeof(new_supply)); reg = opp_table->regulator; @@ -652,8 +646,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) /* Scaling up? Scale voltage before frequency */ if (freq > old_freq) { - ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min, - u_volt_max); + ret = _set_opp_voltage(dev, reg, &new_supply); if (ret) goto restore_voltage; } @@ -672,8 +665,7 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) /* Scaling down? Scale voltage after frequency */ if (freq < old_freq) { - ret = _set_opp_voltage(dev, reg, u_volt, u_volt_min, - u_volt_max); + ret = _set_opp_voltage(dev, reg, &new_supply); if (ret) goto restore_freq; } @@ -686,10 +678,8 @@ int dev_pm_opp_set_rate(struct device *dev, unsigned long target_freq) __func__, old_freq); restore_voltage: /* This shouldn't harm even if the voltages weren't updated earlier */ - if (old_u_volt) { - _set_opp_voltage(dev, reg, old_u_volt, old_u_volt_min, - old_u_volt_max); - } + if (old_supply.u_volt) + _set_opp_voltage(dev, reg, &old_supply); return ret; } -- 2.7.1.410.g6faf27b