Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1754597AbcKYQwA (ORCPT ); Fri, 25 Nov 2016 11:52:00 -0500 Received: from foss.arm.com ([217.140.101.70]:51122 "EHLO foss.arm.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754852AbcKYQtZ (ORCPT ); Fri, 25 Nov 2016 11:49:25 -0500 From: Brian Starkey To: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org Cc: linux-media@vger.kernel.org, daniel@ffwll.ch, gustavo@padovan.org, laurent.pinchart@ideasonboard.com, eric@anholt.net, ville.syrjala@linux.intel.com, liviu.dudau@arm.com Subject: [PATCH 1/6] drm: Add writeback connector type Date: Fri, 25 Nov 2016 16:48:59 +0000 Message-Id: <1480092544-1725-2-git-send-email-brian.starkey@arm.com> X-Mailer: git-send-email 1.7.9.5 In-Reply-To: <1480092544-1725-1-git-send-email-brian.starkey@arm.com> References: <1480092544-1725-1-git-send-email-brian.starkey@arm.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 24406 Lines: 719 Writeback connectors represent writeback engines which can write the CRTC output to a memory framebuffer. Add a writeback connector type and related support functions. Drivers should initialize a writeback connector with drm_writeback_connector_init() which takes care of setting up all the writeback-specific details on top of the normal functionality of drm_connector_init(). Writeback connectors have a WRITEBACK_FB_ID property, used to set the output framebuffer, and a PIXEL_FORMATS blob used to expose the supported writeback formats to userspace. When a framebuffer is attached to a writeback connector with the WRITEBACK_FB_ID property, it is used only once (for the commit in which it was included), and userspace can never read back the value of WRITEBACK_FB_ID. WRITEBACK_FB_ID can only be set if the connector is attached to a CRTC. Changes since v1: - Added drm_writeback.c + documentation - Added helper to initialize writeback connector in one go - Added core checks - Squashed into a single commit - Dropped the client cap - Writeback framebuffers are no longer persistent Changes since v2: Daniel Vetter: - Subclass drm_connector to drm_writeback_connector - Relax check to allow CRTC to be set without an FB - Add some writeback_ prefixes - Drop PIXEL_FORMATS_SIZE property, as it was unnecessary Gustavo Padovan: - Add drm_writeback_job to handle writeback signalling centrally Signed-off-by: Brian Starkey --- Documentation/gpu/drm-kms.rst | 9 ++ drivers/gpu/drm/Makefile | 2 +- drivers/gpu/drm/drm_atomic.c | 130 ++++++++++++++++++++ drivers/gpu/drm/drm_atomic_helper.c | 6 + drivers/gpu/drm/drm_connector.c | 4 +- drivers/gpu/drm/drm_writeback.c | 230 +++++++++++++++++++++++++++++++++++ include/drm/drm_atomic.h | 3 + include/drm/drm_connector.h | 13 ++ include/drm/drm_mode_config.h | 14 +++ include/drm/drm_writeback.h | 78 ++++++++++++ include/uapi/drm/drm_mode.h | 1 + 11 files changed, 488 insertions(+), 2 deletions(-) create mode 100644 drivers/gpu/drm/drm_writeback.c create mode 100644 include/drm/drm_writeback.h diff --git a/Documentation/gpu/drm-kms.rst b/Documentation/gpu/drm-kms.rst index 568f3c2..3a4f35b 100644 --- a/Documentation/gpu/drm-kms.rst +++ b/Documentation/gpu/drm-kms.rst @@ -122,6 +122,15 @@ Connector Functions Reference .. kernel-doc:: drivers/gpu/drm/drm_connector.c :export: +Writeback Connectors +-------------------- + +.. kernel-doc:: drivers/gpu/drm/drm_writeback.c + :doc: overview + +.. kernel-doc:: drivers/gpu/drm/drm_writeback.c + :export: + Encoder Abstraction =================== diff --git a/drivers/gpu/drm/Makefile b/drivers/gpu/drm/Makefile index 883f3e7..3209aa4 100644 --- a/drivers/gpu/drm/Makefile +++ b/drivers/gpu/drm/Makefile @@ -16,7 +16,7 @@ drm-y := drm_auth.o drm_bufs.o drm_cache.o \ drm_framebuffer.o drm_connector.o drm_blend.o \ drm_encoder.o drm_mode_object.o drm_property.o \ drm_plane.o drm_color_mgmt.o drm_print.o \ - drm_dumb_buffers.o drm_mode_config.o + drm_dumb_buffers.o drm_mode_config.o drm_writeback.o drm-$(CONFIG_COMPAT) += drm_ioc32.o drm-$(CONFIG_DRM_GEM_CMA_HELPER) += drm_gem_cma_helper.o diff --git a/drivers/gpu/drm/drm_atomic.c b/drivers/gpu/drm/drm_atomic.c index b476ec5..343e2b7 100644 --- a/drivers/gpu/drm/drm_atomic.c +++ b/drivers/gpu/drm/drm_atomic.c @@ -31,6 +31,7 @@ #include #include #include +#include #include #include "drm_crtc_internal.h" @@ -659,6 +660,46 @@ static void drm_atomic_crtc_print_state(struct drm_printer *p, } /** + * drm_atomic_connector_check - check connector state + * @connector: connector to check + * @state: connector state to check + * + * Provides core sanity checks for connector state. + * + * RETURNS: + * Zero on success, error code on failure + */ +static int drm_atomic_connector_check(struct drm_connector *connector, + struct drm_connector_state *state) +{ + struct drm_crtc_state *crtc_state; + struct drm_writeback_job *writeback_job = state->writeback_job; + + if ((connector->connector_type != DRM_MODE_CONNECTOR_WRITEBACK) || + !writeback_job) + return 0; + + if (writeback_job->fb && !state->crtc) { + DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] framebuffer without CRTC\n", + connector->base.id, connector->name); + return -EINVAL; + } + + if (state->crtc) + crtc_state = drm_atomic_get_existing_crtc_state(state->state, + state->crtc); + + if (writeback_job->fb && !crtc_state->active) { + DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] has framebuffer, but [CRTC:%d] is off\n", + connector->base.id, connector->name, + state->crtc->base.id); + return -EINVAL; + } + + return 0; +} + +/** * drm_atomic_get_plane_state - get plane state * @state: global atomic state object * @plane: plane to get state object for @@ -1087,6 +1128,12 @@ int drm_atomic_connector_set_property(struct drm_connector *connector, * now?) atomic writes to DPMS property: */ return -EINVAL; + } else if (property == config->writeback_fb_id_property) { + struct drm_framebuffer *fb = drm_framebuffer_lookup(dev, val); + int ret = drm_atomic_set_writeback_fb_for_connector(state, fb); + if (fb) + drm_framebuffer_unreference(fb); + return ret; } else if (connector->funcs->atomic_set_property) { return connector->funcs->atomic_set_property(connector, state, property, val); @@ -1135,6 +1182,9 @@ static void drm_atomic_connector_print_state(struct drm_printer *p, *val = (state->crtc) ? state->crtc->base.id : 0; } else if (property == config->dpms_property) { *val = connector->dpms; + } else if (property == config->writeback_fb_id_property) { + /* Writeback framebuffer is one-shot, write and forget */ + *val = 0; } else if (connector->funcs->atomic_get_property) { return connector->funcs->atomic_get_property(connector, state, property, val); @@ -1347,6 +1397,75 @@ int drm_atomic_get_property(struct drm_mode_object *obj, } EXPORT_SYMBOL(drm_atomic_set_crtc_for_connector); +/* + * drm_atomic_get_writeback_job - return or allocate a writeback job + * @conn_state: Connector state to get the job for + * + * Writeback jobs have a different lifetime to the atomic state they are + * associated with. This convenience function takes care of allocating a job + * if there isn't yet one associated with the connector state, otherwise + * it just returns the existing job. + * + * Returns: The writeback job for the given connector state + */ +static struct drm_writeback_job * +drm_atomic_get_writeback_job(struct drm_connector_state *conn_state) +{ + WARN_ON(conn_state->connector->connector_type != + DRM_MODE_CONNECTOR_WRITEBACK); + + if (!conn_state->writeback_job) + conn_state->writeback_job = + kzalloc(sizeof(*conn_state->writeback_job), GFP_KERNEL); + + return conn_state->writeback_job; +} + +/** + * drm_atomic_set_writeback_fb_for_connector - set writeback framebuffer + * @conn_state: atomic state object for the connector + * @fb: fb to use for the connector + * + * This is used to set the framebuffer for a writeback connector, which outputs + * to a buffer instead of an actual physical connector. + * Changing the assigned framebuffer requires us to grab a reference to the new + * fb and drop the reference to the old fb, if there is one. This function + * takes care of all these details besides updating the pointer in the + * state object itself. + * + * Note: The only way conn_state can already have an fb set is if the commit + * sets the property more than once. + * + * See also: drm_writeback_connector_init() + * + * Returns: 0 on success + */ +int drm_atomic_set_writeback_fb_for_connector( + struct drm_connector_state *conn_state, + struct drm_framebuffer *fb) +{ + struct drm_writeback_job *job = + drm_atomic_get_writeback_job(conn_state); + if (!job) + return -ENOMEM; + + if (job->fb) + drm_framebuffer_unreference(job->fb); + if (fb) + drm_framebuffer_reference(fb); + job->fb = fb; + + if (fb) + DRM_DEBUG_ATOMIC("Set [FB:%d] for connector state %p\n", + fb->base.id, conn_state); + else + DRM_DEBUG_ATOMIC("Set [NOFB] for connector state %p\n", + conn_state); + + return 0; +} +EXPORT_SYMBOL(drm_atomic_set_writeback_fb_for_connector); + /** * drm_atomic_add_affected_connectors - add connectors for crtc * @state: atomic state @@ -1501,6 +1620,8 @@ int drm_atomic_check_only(struct drm_atomic_state *state) struct drm_plane_state *plane_state; struct drm_crtc *crtc; struct drm_crtc_state *crtc_state; + struct drm_connector *conn; + struct drm_connector_state *conn_state; int i, ret = 0; DRM_DEBUG_ATOMIC("checking %p\n", state); @@ -1523,6 +1644,15 @@ int drm_atomic_check_only(struct drm_atomic_state *state) } } + for_each_connector_in_state(state, conn, conn_state, i) { + ret = drm_atomic_connector_check(conn, conn_state); + if (ret) { + DRM_DEBUG_ATOMIC("[CONNECTOR:%d:%s] atomic core check failed\n", + conn->base.id, conn->name); + return ret; + } + } + if (config->funcs->atomic_check) ret = config->funcs->atomic_check(state->dev, state); diff --git a/drivers/gpu/drm/drm_atomic_helper.c b/drivers/gpu/drm/drm_atomic_helper.c index 0b16587..75812b9 100644 --- a/drivers/gpu/drm/drm_atomic_helper.c +++ b/drivers/gpu/drm/drm_atomic_helper.c @@ -30,6 +30,7 @@ #include #include #include +#include #include #include "drm_crtc_internal.h" @@ -3192,6 +3193,9 @@ void drm_atomic_helper_connector_reset(struct drm_connector *connector) memcpy(state, connector->state, sizeof(*state)); if (state->crtc) drm_connector_reference(connector); + + /* Don't copy over a writeback job, they are used only once */ + state->writeback_job = NULL; } EXPORT_SYMBOL(__drm_atomic_helper_connector_duplicate_state); @@ -3319,6 +3323,8 @@ struct drm_atomic_state * */ if (state->crtc) drm_connector_unreference(state->connector); + if (state->writeback_job) + drm_writeback_cleanup_job(state->writeback_job); } EXPORT_SYMBOL(__drm_atomic_helper_connector_destroy_state); diff --git a/drivers/gpu/drm/drm_connector.c b/drivers/gpu/drm/drm_connector.c index b5c6a8e..6bbd93f 100644 --- a/drivers/gpu/drm/drm_connector.c +++ b/drivers/gpu/drm/drm_connector.c @@ -86,6 +86,7 @@ struct drm_conn_prop_enum_list { { DRM_MODE_CONNECTOR_VIRTUAL, "Virtual" }, { DRM_MODE_CONNECTOR_DSI, "DSI" }, { DRM_MODE_CONNECTOR_DPI, "DPI" }, + { DRM_MODE_CONNECTOR_WRITEBACK, "Writeback" }, }; void drm_connector_ida_init(void) @@ -235,7 +236,8 @@ int drm_connector_init(struct drm_device *dev, list_add_tail(&connector->head, &config->connector_list); config->num_connector++; - if (connector_type != DRM_MODE_CONNECTOR_VIRTUAL) + if ((connector_type != DRM_MODE_CONNECTOR_VIRTUAL) && + (connector_type != DRM_MODE_CONNECTOR_WRITEBACK)) drm_object_attach_property(&connector->base, config->edid_property, 0); diff --git a/drivers/gpu/drm/drm_writeback.c b/drivers/gpu/drm/drm_writeback.c new file mode 100644 index 0000000..75a1dbf --- /dev/null +++ b/drivers/gpu/drm/drm_writeback.c @@ -0,0 +1,230 @@ +/* + * (C) COPYRIGHT 2016 ARM Limited. All rights reserved. + * Author: Brian Starkey + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms + * of such GNU licence. + */ + +#include +#include +#include +#include + +/** + * DOC: overview + * + * Writeback connectors are used to expose hardware which can write the output + * from a CRTC to a memory buffer. They are used and act similarly to other + * types of connectors, with some important differences: + * - Writeback connectors don't provide a way to output visually to the user. + * - Writeback connectors should always report as "disconnected" (so that + * clients which don't understand them will ignore them). + * - Writeback connectors don't have EDID. + * + * A framebuffer may only be attached to a writeback connector when the + * connector is attached to a CRTC. The WRITEBACK_FB_ID property which sets the + * framebuffer applies only to a single commit (see below). A framebuffer may + * not be attached while the CRTC is off. + * + * Writeback connectors have some additional properties, which userspace + * can use to query and control them: + * + * "WRITEBACK_FB_ID": + * Write-only object property storing a DRM_MODE_OBJECT_FB: it stores the + * framebuffer to be written by the writeback connector. This property is + * similar to the FB_ID property on planes, but will always read as zero + * and is not preserved across commits. + * Userspace must set this property to an output buffer every time it + * wishes the buffer to get filled. + * + * "PIXEL_FORMATS": + * Immutable blob property to store the supported pixel formats table. The + * data is an array of u32 DRM_FORMAT_* fourcc values. + * Userspace can use this blob to find out what pixel formats are supported + * by the connector's writeback engine. + */ + +static bool create_writeback_properties(struct drm_device *dev) +{ + struct drm_property *prop; + + if (!dev->mode_config.writeback_fb_id_property) { + prop = drm_property_create_object(dev, DRM_MODE_PROP_ATOMIC, + "WRITEBACK_FB_ID", + DRM_MODE_OBJECT_FB); + if (!prop) + return false; + dev->mode_config.writeback_fb_id_property = prop; + } + + if (!dev->mode_config.writeback_pixel_formats_property) { + prop = drm_property_create(dev, DRM_MODE_PROP_BLOB | DRM_MODE_PROP_IMMUTABLE, + "PIXEL_FORMATS", 0); + if (!prop) + return false; + dev->mode_config.writeback_pixel_formats_property = prop; + } + + return true; +} + +/** + * drm_writeback_connector_init - Initialize a writeback connector and its properties + * @dev: DRM device + * @wb_connector: Writeback connector to initialize + * @funcs: Connector funcs vtable + * @formats: Array of supported pixel formats for the writeback engine + * @n_formats: Length of the formats array + * + * This function creates the writeback-connector-specific properties if they + * have not been already created, initializes the connector as + * type DRM_MODE_CONNECTOR_WRITEBACK, and correctly initializes the property + * values. + * + * Drivers should always use this function instead of drm_connector_init() to + * set up writeback connectors. + * + * Returns: 0 on success, or a negative error code + */ +int drm_writeback_connector_init(struct drm_device *dev, + struct drm_writeback_connector *wb_connector, + const struct drm_connector_funcs *funcs, + u32 *formats, int n_formats) +{ + int ret; + struct drm_property_blob *blob; + struct drm_connector *connector = &wb_connector->base; + struct drm_mode_config *config = &dev->mode_config; + + if (!create_writeback_properties(dev)) + return -EINVAL; + + blob = drm_property_create_blob(dev, n_formats * sizeof(*formats), + formats); + if (IS_ERR(blob)) + return PTR_ERR(blob); + + ret = drm_connector_init(dev, connector, funcs, + DRM_MODE_CONNECTOR_WRITEBACK); + if (ret) + goto fail; + + INIT_LIST_HEAD(&wb_connector->job_queue); + spin_lock_init(&wb_connector->job_lock); + + drm_object_attach_property(&connector->base, + config->writeback_fb_id_property, 0); + + drm_object_attach_property(&connector->base, + config->writeback_pixel_formats_property, + blob->base.id); + wb_connector->pixel_formats_blob_ptr = blob; + + return 0; + +fail: + drm_property_unreference_blob(blob); + return ret; +} +EXPORT_SYMBOL(drm_writeback_connector_init); + +/** + * @drm_writeback_queue_job: Queue a writeback job for later signalling + * @wb_connector: The writeback connector to queue a job on + * @job: The job to queue + * + * This function adds a job to the job_queue for a writeback connector. It + * should be considered to take ownership of the writeback job, and so any other + * references to the job must be cleared after calling this function. + * + * Drivers must ensure that for a given writeback connector, jobs are queued in + * exactly the same order as they will be completed by the hardware (and + * signaled via drm_writeback_signal_completion). + * + * For every call to drm_writeback_queue_job() there must be exactly one call to + * drm_writeback_signal_completion() + * + * See also: drm_writeback_signal_completion() + */ +void drm_writeback_queue_job(struct drm_writeback_connector *wb_connector, + struct drm_writeback_job *job) +{ + unsigned long flags; + + spin_lock_irqsave(&wb_connector->job_lock, flags); + list_add_tail(&job->list_entry, &wb_connector->job_queue); + spin_unlock_irqrestore(&wb_connector->job_lock, flags); +} +EXPORT_SYMBOL(drm_writeback_queue_job); + +/** + * @drm_writeback_cleanup_job: Cleanup and free a writeback job + * @job: The writeback job to free + * + * Drops any references held by the writeback job, and frees the structure. + */ +void drm_writeback_cleanup_job(struct drm_writeback_job *job) +{ + if (!job) + return; + + if (job->fb) + drm_framebuffer_unreference(job->fb); + kfree(job); +} +EXPORT_SYMBOL(drm_writeback_cleanup_job); + +/* + * @cleanup_work: deferred cleanup of a writeback job + * + * The job cannot be cleaned up directly in drm_writeback_signal_completion, + * because it may be called in interrupt context. Dropping the framebuffer + * reference can sleep, and so the cleanup is deferred to a workqueue. + */ +static void cleanup_work(struct work_struct *work) +{ + struct drm_writeback_job *job = container_of(work, + struct drm_writeback_job, + cleanup_work); + drm_writeback_cleanup_job(job); +} + +/** + * @drm_writeback_signal_completion: Signal the completion of a writeback job + * @wb_connector: The writeback connector whose job is complete + * + * Drivers should call this to signal the completion of a previously queued + * writeback job. It should be called as soon as possible after the hardware + * has finished writing, and may be called from interrupt context. + * It is the driver's responsibility to ensure that for a given connector, the + * hardware completes writeback jobs in the same order as they are queued. + * + * Unless the driver is holding its own reference to the framebuffer, it must + * not be accessed after calling this function. + * + * See also: drm_writeback_queue_job() + */ +void +drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector) +{ + unsigned long flags; + struct drm_writeback_job *job; + + spin_lock_irqsave(&wb_connector->job_lock, flags); + job = list_first_entry_or_null(&wb_connector->job_queue, + struct drm_writeback_job, + list_entry); + if (job) + list_del(&job->list_entry); + spin_unlock_irqrestore(&wb_connector->job_lock, flags); + + if (WARN_ON(!job)) + return; + + INIT_WORK(&job->cleanup_work, cleanup_work); + queue_work(system_long_wq, &job->cleanup_work); +} +EXPORT_SYMBOL(drm_writeback_signal_completion); diff --git a/include/drm/drm_atomic.h b/include/drm/drm_atomic.h index c0eaec7..476561d 100644 --- a/include/drm/drm_atomic.h +++ b/include/drm/drm_atomic.h @@ -351,6 +351,9 @@ void drm_atomic_set_fence_for_plane(struct drm_plane_state *plane_state, int __must_check drm_atomic_set_crtc_for_connector(struct drm_connector_state *conn_state, struct drm_crtc *crtc); +int drm_atomic_set_writeback_fb_for_connector( + struct drm_connector_state *conn_state, + struct drm_framebuffer *fb); int __must_check drm_atomic_add_affected_connectors(struct drm_atomic_state *state, struct drm_crtc *crtc); diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h index 34f9741..dc4910d6 100644 --- a/include/drm/drm_connector.h +++ b/include/drm/drm_connector.h @@ -214,6 +214,19 @@ struct drm_connector_state { struct drm_encoder *best_encoder; struct drm_atomic_state *state; + + /** + * @writeback_job: Writeback job for writeback connectors + * + * Holds the framebuffer for a writeback connector. As the writeback + * completion may be asynchronous to the normal commit cycle, the + * writeback job lifetime is managed separately from the normal atomic + * state by this object. + * + * See also: drm_writeback_queue_job() and + * drm_writeback_signal_completion() + */ + struct drm_writeback_job *writeback_job; }; /** diff --git a/include/drm/drm_mode_config.h b/include/drm/drm_mode_config.h index bf9991b2..3d3d07f 100644 --- a/include/drm/drm_mode_config.h +++ b/include/drm/drm_mode_config.h @@ -634,6 +634,20 @@ struct drm_mode_config { */ struct drm_property *suggested_y_property; + /** + * @writeback_fb_id_property: Property for writeback connectors, storing + * the ID of the output framebuffer. + * See also: drm_writeback_connector_init() + */ + struct drm_property *writeback_fb_id_property; + /** + * @writeback_pixel_formats_property: Property for writeback connectors, + * storing an array of the supported pixel formats for the writeback + * engine (read-only). + * See also: drm_writeback_connector_init() + */ + struct drm_property *writeback_pixel_formats_property; + /* dumb ioctl parameters */ uint32_t preferred_depth, prefer_shadow; diff --git a/include/drm/drm_writeback.h b/include/drm/drm_writeback.h new file mode 100644 index 0000000..6b2ac45 --- /dev/null +++ b/include/drm/drm_writeback.h @@ -0,0 +1,78 @@ +/* + * (C) COPYRIGHT 2016 ARM Limited. All rights reserved. + * Author: Brian Starkey + * + * This program is free software and is provided to you under the terms of the + * GNU General Public License version 2 as published by the Free Software + * Foundation, and any use by you of this program is subject to the terms + * of such GNU licence. + */ + +#ifndef __DRM_WRITEBACK_H__ +#define __DRM_WRITEBACK_H__ +#include +#include + +struct drm_writeback_connector { + struct drm_connector base; + + /** + * @pixel_formats_blob_ptr: + * + * DRM blob property data for the pixel formats list on writeback + * connectors + * See also drm_writeback_connector_init() + */ + struct drm_property_blob *pixel_formats_blob_ptr; + + /** @job_lock: Protects job_queue */ + spinlock_t job_lock; + /** + * @job_queue: + * + * Holds a list of a connector's writeback jobs; the last item is the + * most recent. The first item may be either waiting for the hardware + * to begin writing, or currently being written. + * + * See also: drm_writeback_queue_job() and + * drm_writeback_signal_completion() + */ + struct list_head job_queue; +}; + +struct drm_writeback_job { + /** + * @cleanup_work: + * + * Used to allow drm_writeback_signal_completion to defer dropping the + * framebuffer reference to a workqueue. + */ + struct work_struct cleanup_work; + /** + * @list_entry: + * + * List item for the connector's @job_queue + */ + struct list_head list_entry; + /** + * @fb: + * + * Framebuffer to be written to by the writeback connector. Do not set + * directly, use drm_atomic_set_writeback_fb_for_connector() + */ + struct drm_framebuffer *fb; +}; + +int drm_writeback_connector_init(struct drm_device *dev, + struct drm_writeback_connector *wb_connector, + const struct drm_connector_funcs *funcs, + u32 *formats, int n_formats); + +void drm_writeback_queue_job(struct drm_writeback_connector *wb_connector, + struct drm_writeback_job *job); + +void drm_writeback_cleanup_job(struct drm_writeback_job *job); + +void +drm_writeback_signal_completion(struct drm_writeback_connector *wb_connector); +#endif diff --git a/include/uapi/drm/drm_mode.h b/include/uapi/drm/drm_mode.h index ebf622f..ae5e4f7 100644 --- a/include/uapi/drm/drm_mode.h +++ b/include/uapi/drm/drm_mode.h @@ -263,6 +263,7 @@ struct drm_mode_get_encoder { #define DRM_MODE_CONNECTOR_VIRTUAL 15 #define DRM_MODE_CONNECTOR_DSI 16 #define DRM_MODE_CONNECTOR_DPI 17 +#define DRM_MODE_CONNECTOR_WRITEBACK 18 struct drm_mode_get_connector { -- 1.7.9.5