Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756411AbcK3BMQ (ORCPT ); Tue, 29 Nov 2016 20:12:16 -0500 Received: from mail-pg0-f66.google.com ([74.125.83.66]:35774 "EHLO mail-pg0-f66.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1754190AbcK3BMH (ORCPT ); Tue, 29 Nov 2016 20:12:07 -0500 From: Joshua Clayton To: Alan Tull , Moritz Fischer Cc: Rob Herring , Mark Rutland , Russell King , Joshua Clayton , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org Subject: [PATCH v3 0/3] Altera Cyclone Passive Serial SPI FPGA Manager Date: Tue, 29 Nov 2016 17:11:02 -0800 Message-Id: X-Mailer: git-send-email 2.9.3 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2023 Lines: 48 This series adds an FPGA manager for Altera cyclone FPGAs that can program them using an spi port and a couple of gpios, using Alteras passive serial protocol. Changes from v2: - Merged patch 3 and 4 as suggested in review by Moritz Fischer - Changed FPGA_MIN_DELAY from 250 to 50 ms is the time advertized by Altera. This now works, as we don't assume it is done Changes from v1: - Changed the name from cyclone-spi-fpga-mgr to cyclone-ps-spi-fpga-mgr This name change was requested by Alan Tull, to be specific about which programming method is being employed on the fpga. - Changed the name of the reset-gpio to config-gpio to closer match the way the pins are described in the Altera manual - Moved MODULE_LICENCE, _AUTHOR, and _DESCRIPTION to the bottom - Added a bitrev8x4() function to the bitrev headers and implemented ARM const, runtime, and ARM specific faster versions (This may end up needing to be a standalone patch) - Moved the bitswapping into cyclonespi_write(), as requested. This falls short of my desired generic lsb first spi support, but is a step in that direction. - Fixed whitespace problems introduced during refactoring - Replaced magic number for initial delay with a descriptive macro - Poll the fpga to see when it is ready rather than a fixed 1 ms sleep Joshua Clayton (3): lib: add bitrev8x4() doc: dt: add cyclone-spi binding document fpga manager: Add cyclone-ps-spi driver for Altera FPGAs .../bindings/fpga/cyclone-ps-spi-fpga-mgr.txt | 23 +++ arch/arm/include/asm/bitrev.h | 5 + drivers/fpga/Kconfig | 7 + drivers/fpga/Makefile | 1 + drivers/fpga/cyclone-ps-spi.c | 176 +++++++++++++++++++++ include/linux/bitrev.h | 26 +++ 6 files changed, 238 insertions(+) create mode 100644 Documentation/devicetree/bindings/fpga/cyclone-ps-spi-fpga-mgr.txt create mode 100644 drivers/fpga/cyclone-ps-spi.c -- 2.9.3