Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751758AbcLFH6p (ORCPT ); Tue, 6 Dec 2016 02:58:45 -0500 Received: from mail-pg0-f51.google.com ([74.125.83.51]:33716 "EHLO mail-pg0-f51.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751396AbcLFH6l (ORCPT ); Tue, 6 Dec 2016 02:58:41 -0500 From: Tin Huynh To: Jarkko Nikula , Andy Shevchenko , Mika Westerberg , Wolfram Sang Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, linux-acpi@vger.kernel.org, Loc Ho , Thang Nguyen , Phong Vo , patches@apm.com, Tin Huynh Subject: [PATCH V2] i2c: designware: fix wrong tx/rx fifo for ACPI Date: Tue, 6 Dec 2016 14:57:53 +0700 Message-Id: <1481011073-29143-1-git-send-email-tnhuynh@apm.com> X-Mailer: git-send-email 1.7.1 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1891 Lines: 53 ACPI always sets txfifo and rxfifo to 32. This configuration will cause problem if the IP core supports a fifo size of less than 32. The driver should read the fifo size from the IP and select the smaller one of the two. Signed-off-by: Tin Huynh --- drivers/i2c/busses/i2c-designware-platdrv.c | 15 +++++++++++---- 1 files changed, 11 insertions(+), 4 deletions(-) Change from V1: -Revert the default 32 for fifo, read parameter from IP core and pick the smaller one of the two. -Correct the title to describe new approach. diff --git a/drivers/i2c/busses/i2c-designware-platdrv.c b/drivers/i2c/busses/i2c-designware-platdrv.c index 0b42a12..76b061f 100644 --- a/drivers/i2c/busses/i2c-designware-platdrv.c +++ b/drivers/i2c/busses/i2c-designware-platdrv.c @@ -153,6 +153,7 @@ static int i2c_dw_plat_prepare_clk(struct dw_i2c_dev *i_dev, bool prepare) static int dw_i2c_plat_probe(struct platform_device *pdev) { struct dw_i2c_platform_data *pdata = dev_get_platdata(&pdev->dev); + u32 param1, tx_fifo_depth, rx_fifo_depth; struct dw_i2c_dev *dev; struct i2c_adapter *adap; struct resource *mem; @@ -246,12 +247,18 @@ static int dw_i2c_plat_probe(struct platform_device *pdev) 1000000); } + param1 = i2c_dw_read_comp_param(dev); + tx_fifo_depth = ((param1 >> 16) & 0xff) + 1; + rx_fifo_depth = ((param1 >> 8) & 0xff) + 1; if (!dev->tx_fifo_depth) { - u32 param1 = i2c_dw_read_comp_param(dev); - - dev->tx_fifo_depth = ((param1 >> 16) & 0xff) + 1; - dev->rx_fifo_depth = ((param1 >> 8) & 0xff) + 1; + dev->tx_fifo_depth = tx_fifo_depth; + dev->rx_fifo_depth = rx_fifo_depth; dev->adapter.nr = pdev->id; + } else if (tx_fifo_depth) { + dev->tx_fifo_depth = min_t(u32, dev->tx_fifo_depth, + tx_fifo_depth); + dev->rx_fifo_depth = min_t(u32, dev->rx_fifo_depth, + rx_fifo_depth); } adap = &dev->adapter; -- 1.7.1