Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932256AbcLGKnI (ORCPT ); Wed, 7 Dec 2016 05:43:08 -0500 Received: from mail-wm0-f43.google.com ([74.125.82.43]:34830 "EHLO mail-wm0-f43.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753177AbcLGKnD (ORCPT ); Wed, 7 Dec 2016 05:43:03 -0500 From: Bartosz Golaszewski To: Jyri Sarha , Tomi Valkeinen , David Airlie , Kevin Hilman , Michael Turquette , Sekhar Nori , Rob Herring , Frank Rowand , Mark Rutland , Laurent Pinchart , Peter Ujfalusi , Russell King Cc: LKML , arm-soc , linux-drm , linux-devicetree , Bartosz Golaszewski Subject: [PATCH v5 3/4] ARM: dts: da850-lcdk: add the vga-bridge node Date: Wed, 7 Dec 2016 11:42:44 +0100 Message-Id: <1481107365-24839-4-git-send-email-bgolaszewski@baylibre.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1481107365-24839-1-git-send-email-bgolaszewski@baylibre.com> References: <1481107365-24839-1-git-send-email-bgolaszewski@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1752 Lines: 93 Add the vga-bridge node to the board DT together with corresponding ports and vga connector. This allows to retrieve the edid info from the display automatically. Signed-off-by: Bartosz Golaszewski --- arch/arm/boot/dts/da850-lcdk.dts | 67 ++++++++++++++++++++++++++++++++++++++++ 1 file changed, 67 insertions(+) diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts index afcb482..39602eb 100644 --- a/arch/arm/boot/dts/da850-lcdk.dts +++ b/arch/arm/boot/dts/da850-lcdk.dts @@ -51,6 +51,51 @@ system-clock-frequency = <24576000>; }; }; + + vga-bridge { + compatible = "ti,ths8135"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vga_bridge_in: endpoint@0 { + reg = <0>; + remote-endpoint = <&lcdc_out_vga>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + vga_bridge_out: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_con_in>; + }; + }; + }; + }; + + vga { + compatible = "vga-connector"; + + ddc-i2c-bus = <&i2c0>; + + port { + vga_con_in: endpoint { + remote-endpoint = <&vga_bridge_out>; + }; + }; + }; }; &pmx_core { @@ -236,3 +281,25 @@ &memctrl { status = "okay"; }; + +&lcdc { + status = "okay"; + pinctrl-names = "default"; + pinctrl-0 = <&lcd_pins>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + lcdc_out: port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + lcdc_out_vga: endpoint@0 { + reg = <0>; + remote-endpoint = <&vga_bridge_in>; + }; + }; + }; +}; -- 2.9.3