Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752671AbcLGMmI (ORCPT ); Wed, 7 Dec 2016 07:42:08 -0500 Received: from bastet.se.axis.com ([195.60.68.11]:36805 "EHLO bastet.se.axis.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752249AbcLGMmF (ORCPT ); Wed, 7 Dec 2016 07:42:05 -0500 From: Niklas Cassel To: Giuseppe Cavallaro , Alexandre Torgue CC: Niklas Cassel , , Subject: [RESEND PATCH 3/3] net: stmmac: stmmac_platform: use correct setup function for gmac4 Date: Wed, 7 Dec 2016 13:41:08 +0100 Message-ID: <1481114469-4788-3-git-send-email-niklass@axis.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1481114469-4788-1-git-send-email-niklass@axis.com> References: <1481114469-4788-1-git-send-email-niklass@axis.com> MIME-Version: 1.0 Content-Type: text/plain X-Originating-IP: [10.0.5.60] X-ClientProxiedBy: XBOX03.axis.com (10.0.5.17) To XBOX02.axis.com (10.0.5.16) X-TM-AS-GCONF: 00 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2763 Lines: 65 From: Niklas Cassel devicetree binding for stmmac states: - compatible: Should be "snps,dwmac-", "snps,dwmac" For backwards compatibility: "st,spear600-gmac" is also supported. Previously, when specifying "snps,dwmac-4.10a", "snps,dwmac" as your compatible string, plat_stmmacenet_data would have both has_gmac and has_gmac4 set. This would lead to stmmac_hw_init calling dwmac1000_setup rather than dwmac4_setup, resulting in a non-functional driver. This happened since the check for has_gmac is done before the check for has_gmac4. However, the order should not matter, so it does not make sense to have both set. If something is valid for both, you should do as the stmmac_interrupt does: if (priv->plat->has_gmac || priv->plat->has_gmac4) ... The places where it was obvious that the author actually meant if (has_gmac || has_gmac4) rather than if (has_gmac) has been updated. Signed-off-by: Niklas Cassel Acked-by: Alexandre TORGUE --- drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c | 4 ++-- drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c | 1 + 2 files changed, 3 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c index d5a8122b6033..dd5b38e4cd1f 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_ethtool.c @@ -263,7 +263,7 @@ static void stmmac_ethtool_getdrvinfo(struct net_device *dev, { struct stmmac_priv *priv = netdev_priv(dev); - if (priv->plat->has_gmac) + if (priv->plat->has_gmac || priv->plat->has_gmac4) strlcpy(info->driver, GMAC_ETHTOOL_NAME, sizeof(info->driver)); else strlcpy(info->driver, MAC100_ETHTOOL_NAME, @@ -448,7 +448,7 @@ static void stmmac_ethtool_gregs(struct net_device *dev, memset(reg_space, 0x0, REG_SPACE_SIZE); - if (!priv->plat->has_gmac) { + if (!(priv->plat->has_gmac || priv->plat->has_gmac4)) { /* MAC registers */ for (i = 0; i < 12; i++) reg_space[i] = readl(priv->ioaddr + (i * 4)); diff --git a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c index e528e7126b65..d3b6f92f350a 100644 --- a/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c +++ b/drivers/net/ethernet/stmicro/stmmac/stmmac_platform.c @@ -292,6 +292,7 @@ stmmac_probe_config_dt(struct platform_device *pdev, const char **mac) if (of_device_is_compatible(np, "snps,dwmac-4.00") || of_device_is_compatible(np, "snps,dwmac-4.10a")) { plat->has_gmac4 = 1; + plat->has_gmac = 0; plat->pmt = 1; plat->tso_en = of_property_read_bool(np, "snps,tso"); } -- 2.1.4