Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752801AbcLLNF4 (ORCPT ); Mon, 12 Dec 2016 08:05:56 -0500 Received: from mail-wj0-f177.google.com ([209.85.210.177]:35188 "EHLO mail-wj0-f177.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752676AbcLLNFx (ORCPT ); Mon, 12 Dec 2016 08:05:53 -0500 From: Bartosz Golaszewski To: Jyri Sarha , Tomi Valkeinen , David Airlie , Kevin Hilman , Michael Turquette , Sekhar Nori , Rob Herring , Frank Rowand , Mark Rutland , Laurent Pinchart , Peter Ujfalusi , Russell King Cc: LKML , arm-soc , linux-drm , linux-devicetree , Bartosz Golaszewski Subject: [PATCH v6 2/5] drm: bridge: add DT bindings for TI ths8135 Date: Mon, 12 Dec 2016 14:05:39 +0100 Message-Id: <1481547942-24775-3-git-send-email-bgolaszewski@baylibre.com> X-Mailer: git-send-email 2.1.4 In-Reply-To: <1481547942-24775-1-git-send-email-bgolaszewski@baylibre.com> References: <1481547942-24775-1-git-send-email-bgolaszewski@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1641 Lines: 69 THS8135 is a configurable video DAC. Add DT bindings for this chip. Signed-off-by: Bartosz Golaszewski Reviewed-by: Laurent Pinchart --- .../bindings/display/bridge/ti,ths8135.txt | 52 ++++++++++++++++++++++ 1 file changed, 52 insertions(+) create mode 100644 Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt diff --git a/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt new file mode 100644 index 0000000..87aff90 --- /dev/null +++ b/Documentation/devicetree/bindings/display/bridge/ti,ths8135.txt @@ -0,0 +1,52 @@ +THS8135 Video DAC +----------------- + +This is the binding for Texas Instruments THS8135 Video DAC bridge. + +Required properties: + +- compatible: Must be "ti,ths8135" + +Required nodes: + +This device has two video ports. Their connections are modelled using the OF +graph bindings specified in Documentation/devicetree/bindings/graph.txt. + +- Video port 0 for RGB input +- Video port 1 for VGA output + +Example +------- + +vga-bridge { + compatible = "ti,ths8135"; + #address-cells = <1>; + #size-cells = <0>; + + ports { + #address-cells = <1>; + #size-cells = <0>; + + port@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0>; + + vga_bridge_in: endpoint { + reg = <0>; + remote-endpoint = <&lcdc_out_vga>; + }; + }; + + port@1 { + #address-cells = <1>; + #size-cells = <0>; + reg = <1>; + + vga_bridge_out: endpoint { + reg = <0>; + remote-endpoint = <&vga_con_in>; + }; + }; + }; +}; -- 2.9.3