Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755423AbcLNMIR (ORCPT ); Wed, 14 Dec 2016 07:08:17 -0500 Received: from mail-wj0-f195.google.com ([209.85.210.195]:35505 "EHLO mail-wj0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755365AbcLNMIM (ORCPT ); Wed, 14 Dec 2016 07:08:12 -0500 MIME-Version: 1.0 X-Originating-IP: [31.134.143.3] From: Vasiliy Tolstov Date: Wed, 14 Dec 2016 15:07:48 +0300 X-Google-Sender-Auth: 5c6dEqiN1_3BJtiKBP3HBj7cz3c Message-ID: Subject: Samsung SSD 1.92TB PM863 Enterprise 2.5" SATA3 errors withc stable 4.4.34 To: linux-kernel Cc: stable@vger.kernel.org, linux-scsi@vger.kernel.org Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2685 Lines: 61 Hi! I have stable problems with all Samsung SSD drivers like PM863 and EVO 850 Pro. Time after time scsi bus reset link with messages: [ 2477.973617] ata1: exception Emask 0x50 SAct 0x0 SErr 0x4090800 action 0xe frozen [ 2477.975036] ata1: irq_stat 0x00400040, connection status changed [ 2477.976396] ata1: SError: { HostInt PHYRdyChg 10B8B DevExch } [ 2477.977766] ata1: hard resetting link [ 2478.701015] ata1: SATA link down (SStatus 0 SControl 300) [ 2483.700924] ata1: hard resetting link [ 2484.020924] ata1: SATA link down (SStatus 0 SControl 300) [ 2484.022257] ata1: limiting SATA link speed to 1.5 Gbps [ 2489.020766] ata1: hard resetting link [ 2489.340828] ata1: SATA link down (SStatus 0 SControl 310) [ 2489.342158] ata1.00: disabled [ 2489.343452] ata1: EH complete [ 2489.344806] ata1.00: detaching (SCSI 0:0:0:0) [ 2489.347434] sd 0:0:0:0: [sda] Stopping disk [ 2489.348605] sd 0:0:0:0: [sda] Start/Stop Unit failed: Result: hostbyte=DID_BAD_TARGET driverbyte=DRIVER_OK [ 3457.586929] ata1: exception Emask 0x10 SAct 0x0 SErr 0x4040000 action 0xe frozen [ 3457.588224] ata1: irq_stat 0x00000040, connection status changed [ 3457.589453] ata1: SError: { CommWake DevExch } [ 3457.590679] ata1: hard resetting link [ 3458.312616] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 3461.139831] ata1.00: ATA-9: SAMSUNG MZ7LM1T9HCJM-0E003, GXT3003Q, max UDMA/133 [ 3461.141027] ata1.00: 3750748848 sectors, multi 16: LBA48 NCQ (depth 31/32), AA [ 3461.142882] ata1.00: configured for UDMA/133 [ 3461.144004] ata1: EH complete [ 3461.145545] scsi 0:0:0:0: Direct-Access ATA SAMSUNG MZ7LM1T9 003Q PQ: 0 ANSI: 5 [ 3461.147069] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 3461.147082] sd 0:0:0:0: [sda] 3750748848 512-byte logical blocks: (1.92 TB/1.75 TiB) [ 3461.147649] sd 0:0:0:0: [sda] Write Protect is off [ 3461.147652] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 3461.147849] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 3461.152457] sd 0:0:0:0: [sda] Attached SCSI removable disk I'm try to remove drive and add it again message not appears may be one hour or more. I'm try different servers from HP and Supermicro and error is present. Also i'm try various disk from this series and nothing changed. If i have massive workload like writing to ext4 fs on this ssd drivers i get corrupted ext4 journal and readonly fs. My kernel version is 4.4.34 May be some Samsung engineers presented in this mailing list and ca help to solve this errors? Or for server i need only Intel SSD (yes if i use intel ssd this error not happening, this is not intel advertising) -- Vasiliy Tolstov, e-mail: v.tolstov@selfip.ru