Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S938584AbcLOQa7 (ORCPT ); Thu, 15 Dec 2016 11:30:59 -0500 Received: from mail-wm0-f46.google.com ([74.125.82.46]:35537 "EHLO mail-wm0-f46.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1758199AbcLOQay (ORCPT ); Thu, 15 Dec 2016 11:30:54 -0500 From: Axel Haslam To: broonie@kernel.org, lgirdwood@gmail.com, khilman@baylibre.com, nsekhar@ti.com, david@lechnology.com, robh+dt@kernel.org Cc: linux-kernel@vger.kernel.org, Axel Haslam , devicetree@vger.kernel.org Subject: [PATCHv4 1/2] regulator: fixed: dt: Allow an optional over current pin Date: Thu, 15 Dec 2016 17:29:54 +0100 Message-Id: <20161215162955.3940-2-ahaslam@baylibre.com> X-Mailer: git-send-email 2.9.3 In-Reply-To: <20161215162955.3940-1-ahaslam@baylibre.com> References: <20161215162955.3940-1-ahaslam@baylibre.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1334 Lines: 33 Add support for an optional over current input pin which can be used to send an over current event to the regulator consumer. Cc: devicetree@vger.kernel.org Acked-by: Rob Herring Signed-off-by: Axel Haslam --- Documentation/devicetree/bindings/regulator/fixed-regulator.txt | 2 ++ 1 file changed, 2 insertions(+) diff --git a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt index 4fae41d..b145abb 100644 --- a/Documentation/devicetree/bindings/regulator/fixed-regulator.txt +++ b/Documentation/devicetree/bindings/regulator/fixed-regulator.txt @@ -11,6 +11,7 @@ If this property is missing, the default assumed is Active low. - gpio-open-drain: GPIO is open drain type. If this property is missing then default assumption is false. -vin-supply: Input supply name. +- over-current-gpios: Input gpio that signal an over current condition. Any property defined as part of the core regulator binding, defined in regulator.txt, can also be used. @@ -26,6 +27,7 @@ Example: regulator-min-microvolt = <1800000>; regulator-max-microvolt = <1800000>; gpio = <&gpio1 16 0>; + over-current-gpios = <&gpio1 18 0>; startup-delay-us = <70000>; enable-active-high; regulator-boot-on; -- 2.9.3