Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264005AbTEONEq (ORCPT ); Thu, 15 May 2003 09:04:46 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264007AbTEONEq (ORCPT ); Thu, 15 May 2003 09:04:46 -0400 Received: from 205-158-62-136.outblaze.com ([205.158.62.136]:30908 "HELO fs5-4.us4.outblaze.com") by vger.kernel.org with SMTP id S264005AbTEONEV (ORCPT ); Thu, 15 May 2003 09:04:21 -0400 Subject: Re: 2.5.69-mm5: pccard oops while booting: resolved From: Felipe Alfaro Solana To: Russell King Cc: Andrew Morton , LKML In-Reply-To: <20030515130019.B30619@flint.arm.linux.org.uk> References: <1052964213.586.3.camel@teapot.felipe-alfaro.com> <20030514191735.6fe0998c.akpm@digeo.com> <1052998601.726.1.camel@teapot.felipe-alfaro.com> <20030515130019.B30619@flint.arm.linux.org.uk> Content-Type: multipart/mixed; boundary="=-CTTIQ2mocEnTpwy1r5nu" Message-Id: <1053004615.586.2.camel@teapot.felipe-alfaro.com> Mime-Version: 1.0 X-Mailer: Ximian Evolution 1.3.3 (Preview Release) Date: 15 May 2003 15:16:55 +0200 Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 33141 Lines: 1294 --=-CTTIQ2mocEnTpwy1r5nu Content-Type: text/plain Content-Transfer-Encoding: 7bit On Thu, 2003-05-15 at 14:00, Russell King wrote: > On Thu, May 15, 2003 at 01:36:41PM +0200, Felipe Alfaro Solana wrote: > > I applied the second half patch on top of 2.5.69-mm5 (the original > > 2.5.69-mm5 defined BUS_ID_SIZE as 20), but the "pccard" kernel task > > keeps crashing as before. > > > > Anything else for me to try? :-) > > I don't believe this problem is being caused by PCMCIA/Cardbus (until > someone proves me wrong.) > > This came up a few weeks ago, and it looked like the device models > driver lists became corrupted somehow. Unfortunately it wasn't proven > back then, and I haven't been able to reproduce this behaviour here. > > We seem to be failing in pci_bus_match(), with pci_drv->id_table > containing an invalid address. Could you apply this patch and see > what happens? It'll be rather noisy during boot though. > > The interesting one should be immediately prior to the oops. > > --- orig/drivers/pci/pci-driver.c Sun Nov 24 10:12:24 2002 > +++ linux/drivers/pci/pci-driver.c Thu May 15 12:58:56 2003 > @@ -6,6 +6,7 @@ > #include > #include > #include > +#include > #include "pci.h" > > /* > @@ -183,7 +184,9 @@ > struct pci_dev * pci_dev = to_pci_dev(dev); > struct pci_driver * pci_drv = to_pci_driver(drv); > const struct pci_device_id * ids = pci_drv->id_table; > - > +printk("pci_bus_match: pci_drv = %p", pci_drv); > +print_symbol(" (%s)", pci_drv); > +printk("\n"); > if (!ids) > return 0; > > OK, attached to this message: "dmesg" contains the kernel messages when booting up 2.5.69-mm5 at tun level 1 with the patch applied. "config" contains options used to configure the kernel. Mostly, the cardbus stuff is built-in, so no modules were loaded when booting into single-user mode. Hope this helps! --=-CTTIQ2mocEnTpwy1r5nu Content-Disposition: attachment; filename=dmesg Content-Type: application/octet-stream; name=dmesg Content-Transfer-Encoding: 8bit Linux version 2.5.69-mm5b (root@glass.felipe-alfaro.com) (gcc version 3.2.3 20030422 (Red Hat Linux 3.2.3-4)) #2 Thu May 15 15:09:26 CEST 2003 Video mode to be used for restore is f00 BIOS-provided physical RAM map: BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) BIOS-e820: 0000000000100000 - 000000000fff0000 (usable) BIOS-e820: 000000000fff0000 - 000000000fff8000 (ACPI data) BIOS-e820: 000000000fff8000 - 0000000010000000 (ACPI NVS) BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) BIOS-e820: 00000000fff80000 - 0000000100000000 (reserved) 255MB LOWMEM available. On node 0 totalpages: 65520 DMA zone: 4096 pages, LIFO batch:1 Normal zone: 61424 pages, LIFO batch:14 HighMem zone: 0 pages, LIFO batch:1 ACPI: RSDP (v000 NEC ) @ 0x000fb550 ACPI: RSDT (v001 NEC ND000020 00000.00001) @ 0x0fff0000 ACPI: FADT (v001 NEC ND000020 00000.00001) @ 0x0fff0030 ACPI: BOOT (v001 NEC ND000020 00000.00001) @ 0x0fff00b0 ACPI: DSDT (v001 NEC ND000020 00000.00001) @ 0x00000000 ACPI: BIOS passes blacklist Building zonelist for node : 0 Kernel command line: ro root=/dev/hda3 1 Initializing CPU#0 PID hash table entries: 1024 (order 10: 8192 bytes) Detected 697.029 MHz processor. Console: colour VGA+ 80x25 Calibrating delay loop... 1376.25 BogoMIPS Memory: 256048k/262080k available (1739k kernel code, 5304k reserved, 682k data, 104k init, 0k highmem) Dentry cache hash table entries: 32768 (order: 5, 131072 bytes) Inode-cache hash table entries: 16384 (order: 4, 65536 bytes) Mount-cache hash table entries: 512 (order: 0, 4096 bytes) -> /dev -> /dev/console -> /root CPU: L1 I cache: 16K, L1 D cache: 16K CPU: L2 cache: 256K CPU: After generic, caps: 0383f9ff 00000000 00000000 00000040 CPU: Intel Pentium III (Coppermine) stepping 06 Enabling fast FPU save and restore... done. Enabling unmasked SIMD FPU exception support... done. Checking 'hlt' instruction... OK. POSIX conformance testing by UNIFIX mtrr: v2.0 (20020519) PCI: PCI BIOS revision 2.10 entry at 0xfdb81, last bus=1 PCI: Using configuration type 1 BIO: pool of 256 setup, 14Kb (56 bytes/bio) biovec pool[0]: 1 bvecs: 256 entries (12 bytes) biovec pool[1]: 4 bvecs: 256 entries (48 bytes) biovec pool[2]: 16 bvecs: 256 entries (192 bytes) biovec pool[3]: 64 bvecs: 256 entries (768 bytes) biovec pool[4]: 128 bvecs: 256 entries (1536 bytes) biovec pool[5]: 256 bvecs: 256 entries (3072 bytes) ACPI: Subsystem revision 20030418 ACPI: Interpreter enabled ACPI: Using PIC for interrupt routing ACPI: PCI Root Bridge [NRTH] (00:00) PCI: Probing PCI hardware (bus 00) ACPI: PCI Interrupt Routing Table [\_SB_.NRTH._PRT] ACPI: Embedded Controller [EC0] (gpe 9) ACPI: Power Resource [PUSB] (off) ACPI: PCI Interrupt Link [LNKA] (IRQs 10, disabled) ACPI: PCI Interrupt Link [LNKB] (IRQs 5, disabled) ACPI: PCI Interrupt Link [LNKC] (IRQs 5 7 10, disabled) ACPI: PCI Interrupt Link [LNKD] (IRQs 9, disabled) block request queues: 4/128 requests per read queue 4/128 requests per write queue enter congestion at 15 exit congestion at 17 Linux Kernel Card Services 3.1.22 options: [pci] [cardbus] [pm] drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 10 ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 5 ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 9 PCI: Using ACPI for IRQ routing PCI: if you experience problems, try using option 'pci=noacpi' or even 'acpi=off' Initializing RT netlink socket SBF: Simple Boot Flag extension found and enabled. SBF: Setting boot flags 0x1 Enabling SEP on CPU 0 Limiting direct PCI/PCI transfers. ACPI: AC Adapter [AC] (on-line) ACPI: Battery Slot [BAT0] (battery absent) ACPI: Power Button (CM) [PRB1] ACPI: Lid Switch [LID0] ACPI: Fan [FANC] (on) ACPI: Processor [CPU0] (supports C1) ACPI: Thermal Zone [THRM] (64 C) pty: 256 Unix98 ptys configured Real Time Clock Driver v1.11 Linux agpgart interface v0.100 (c) Dave Jones pci_bus_match: pci_drv = c0327120 (0xc0327120) agpgart: Detected an Intel 440BX Chipset. agpgart: Maximum main memory to use for agp memory: 203M agpgart: AGP aperture is 256M @ 0xe0000000 pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0327120 (0xc0327120) Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx PIIX4: IDE controller at PCI slot 00:07.1 PIIX4: chipset revision 1 PIIX4: not 100% native mode: will probe irqs later ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:DMA, hdb:pio ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:pio hda: HITACHI_DK23BA-20, ATA DISK drive anticipatory scheduling elevator ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 hdc: MATSHITADVD-ROM SR-8185, ATAPI CD/DVD-ROM drive anticipatory scheduling elevator ide1 at 0x170-0x177,0x376 on irq 15 pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c0329460 (0xc0329460) hda: host protected area => 1 hda: 39070080 sectors (20004 MB) w/2048KiB Cache, CHS=38760/16/63, UDMA(33) hda: hda1 hda2 hda3 hda4 hdc: ATAPI 24X DVD-ROM drive, 512kB Cache, UDMA(33) Uniform CD-ROM driver Revision: 3.12 end_request: I/O error, dev hdc, sector 0 pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) yenta 00:0c.0: Preassigned resource 3 busy, reconfiguring... Yenta IRQ list 08d8, PCI irq10 Socket status: 30000068 pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) yenta 00:0c.1: Preassigned resource 2 busy, reconfiguring... yenta 00:0c.1: Preassigned resource 3 busy, reconfiguring... Yenta IRQ list 08d8, PCI irq5 Socket status: 30000006 pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) drivers/usb/host/uhci-hcd.c: USB Universal Host Controller Interface driver v2.0 pci_bus_match: pci_drv = c032b140 (0xc032b140) pci_bus_match: pci_drv = c032b140 (0xc032b140) pci_bus_match: pci_drv = c032b140 (0xc032b140) uhci-hcd 00:07.2: Intel Corp. 82371AB/EB/MB PIIX4 uhci-hcd 00:07.2: irq 9, io base 0000ef80 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. uhci-hcd 00:07.2: new USB bus registered, assigned bus number 1 hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected pci_bus_match: pci_drv = c032b140 (0xc032b140) pci_bus_match: pci_drv = c032b140 (0xc032b140) pci_bus_match: pci_drv = c032b140 (0xc032b140) pci_bus_match: pci_drv = c032b140 (0xc032b140) pci_bus_match: pci_drv = c032b140 (0xc032b140) drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver mice: PS/2 mouse device common for all mice input: ImPS/2 Generic Wheel Mouse on isa0060/serio1 serio: i8042 AUX port at 0x60,0x64 irq 12 input: AT Set 2 keyboard on isa0060/serio0 serio: i8042 KBD port at 0x60,0x64 irq 1 Advanced Linux Sound Architecture Driver Version 0.9.2 (Thu Mar 20 13:31:57 2003 UTC). pci_bus_match: pci_drv = c032df60 (0xc032df60) pci_bus_match: pci_drv = c032df60 (0xc032df60) pci_bus_match: pci_drv = c032df60 (0xc032df60) pci_bus_match: pci_drv = c032df60 (0xc032df60) pci_bus_match: pci_drv = c032df60 (0xc032df60) pci_bus_match: pci_drv = c032df60 (0xc032df60) pci_bus_match: pci_drv = c032df60 (0xc032df60) ALSA device list: #0: Yamaha DS-XG PCI (YMF754) at 0xd0851000, irq 5 NET4: Linux TCP/IP 1.0 for NET4.0 pci_bus_match: pci_drv = c0327120 (0xc0327120) pci_bus_match: pci_drv = c0329460 (0xc0329460) pci_bus_match: pci_drv = c032a4c0 (0xc032a4c0) pci_bus_match: pci_drv = c032b140 (0xc032b140) pci_bus_match: pci_drv = c032df60 (0xc032df60) pci_bus_match: pci_drv = cff47c68 (0xcff47c68) pci_bus_match: pci_drv = c02ddc74 (0xc02ddc74) Unable to handle kernel paging request at virtual address 25007367 printing eip: c01924c9 *pde = 00000000 Oops: 0000 [#1] CPU: 0 EIP: 0060:[] Not tainted VLI EFLAGS: 00010202 EIP is at pci_bus_match+0x49/0xe0 eax: 00000000 ebx: c02ddc74 ecx: c02f2910 edx: 00000282 esi: 25007367 edi: c13c1000 ebp: cff3944c esp: cfde7ec0 ds: 007b es: 007b ss: 0068 Process pccardd (pid: 10, threadinfo=cfde6000 task=c1390060) Stack: c02ca1f0 c02ddc74 c02ddc9c c13c104c ffffffed c01d05bf c13c104c c02ddc9c c02ddccc c13c104c c032093c c01d065f c13c104c c02ddc9c c13c104c c03208e0 c13c1084 c01d0814 c13c104c c02c3743 c0327200 c13c104c 00000000 c13c1084 Call Trace: [] bus_match+0x2f/0x80 [] device_attach+0x4f/0x90 [] bus_add_device+0x64/0xb0 [] device_add+0xd4/0x110 [] pci_bus_add_devices+0xae/0xe0 [] cb_alloc+0xab/0xf0 [] socket_insert+0x69/0x80 [] get_socket_status+0x1a/0x20 [] pccardd+0x13d/0x1f0 [] default_wake_function+0x0/0x20 [] ret_from_fork+0x6/0x14 [] default_wake_function+0x0/0x20 [] pccardd+0x0/0x1f0 [] kernel_thread_helper+0x5/0x18 Code: 16 6d 2c c0 e8 19 77 f8 ff 89 5c 24 04 c7 04 24 8e b4 2c c0 e8 59 ce f9 ff c7 04 24 f0 a1 2c c0 e8 fd 76 f8 ff 31 c0 85 f6 74 2f <8b> 16 85 d2 74 79 90 83 fa ff 74 2b 0f b7 47 24 39 c2 74 23 83 <6>hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 IP: routing cache hash table of 2048 buckets, 16Kbytes TCP: Hash tables configured (established 16384 bind 32768) NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. VFS: Mounted root (ext2 filesystem) readonly. Freeing unused kernel memory: 104k freed hub 1-0:0: new USB device on port 1, assigned address 2 input: USB HID v1.00 Mouse [Microsoft Microsoft IntelliMouse? Explorer] on usb-00:07.2-1 hub 1-0:0: debounce: port 2: delay 100ms stable 4 status 0x101 hub 1-0:0: new USB device on port 2, assigned address 3 hub 1-2:0: USB hub found hub 1-2:0: 2 ports detected Adding 257032k swap on /dev/hda2. Priority:-1 extents:1 blk: queue c038d3dc, I/O limit 4095Mb (mask 0xffffffff) end_request: I/O error, dev hdc, sector 0 end_request: I/O error, dev hdc, sector 0 hdc: drive_cmd: status=0x51 { DriveReady SeekComplete Error } hdc: drive_cmd: error=0x04Aborted Command --=-CTTIQ2mocEnTpwy1r5nu Content-Disposition: attachment; filename=config Content-Type: text/plain; name=config; charset=ISO-8859-15 Content-Transfer-Encoding: 7bit # # Automatically generated make config: don't edit # CONFIG_X86=y CONFIG_MMU=y CONFIG_UID16=y CONFIG_GENERIC_ISA_DMA=y # # Code maturity level options # CONFIG_EXPERIMENTAL=y # # General setup # CONFIG_SWAP=y CONFIG_SYSVIPC=y # CONFIG_BSD_PROCESS_ACCT is not set CONFIG_SYSCTL=y CONFIG_LOG_BUF_SHIFT=14 CONFIG_FUTEX=y # # Loadable module support # CONFIG_MODULES=y CONFIG_MODULE_UNLOAD=y CONFIG_MODULE_FORCE_UNLOAD=y CONFIG_OBSOLETE_MODPARM=y # CONFIG_MODVERSIONS is not set CONFIG_KMOD=y # # Processor type and features # CONFIG_X86_PC=y # CONFIG_X86_VOYAGER is not set # CONFIG_X86_NUMAQ is not set # CONFIG_X86_SUMMIT is not set # CONFIG_X86_BIGSMP is not set # CONFIG_X86_VISWS is not set # CONFIG_X86_GENERICARCH is not set # CONFIG_M386 is not set # CONFIG_M486 is not set # CONFIG_M586 is not set # CONFIG_M586TSC is not set # CONFIG_M586MMX is not set # CONFIG_M686 is not set # CONFIG_MPENTIUMII is not set CONFIG_MPENTIUMIII=y # CONFIG_MPENTIUM4 is not set # CONFIG_MK6 is not set # CONFIG_MK7 is not set # CONFIG_MK8 is not set # CONFIG_MELAN is not set # CONFIG_MCRUSOE is not set # CONFIG_MWINCHIPC6 is not set # CONFIG_MWINCHIP2 is not set # CONFIG_MWINCHIP3D is not set # CONFIG_MCYRIXIII is not set # CONFIG_MVIAC3_2 is not set # CONFIG_X86_GENERIC is not set CONFIG_X86_CMPXCHG=y CONFIG_X86_XADD=y CONFIG_X86_L1_CACHE_SHIFT=5 CONFIG_RWSEM_XCHGADD_ALGORITHM=y CONFIG_X86_WP_WORKS_OK=y CONFIG_X86_INVLPG=y CONFIG_X86_BSWAP=y CONFIG_X86_POPAD_OK=y CONFIG_X86_GOOD_APIC=y CONFIG_X86_INTEL_USERCOPY=y CONFIG_X86_USE_PPRO_CHECKSUM=y # CONFIG_HUGETLB_PAGE is not set # CONFIG_SMP is not set CONFIG_PREEMPT=y # CONFIG_X86_UP_APIC is not set CONFIG_X86_TSC=y # CONFIG_X86_MCE is not set # CONFIG_TOSHIBA is not set # CONFIG_I8K is not set # CONFIG_MICROCODE is not set # CONFIG_X86_MSR is not set # CONFIG_X86_CPUID is not set # CONFIG_EDD is not set CONFIG_NOHIGHMEM=y # CONFIG_HIGHMEM4G is not set # CONFIG_HIGHMEM64G is not set # CONFIG_025GB is not set # CONFIG_05GB is not set CONFIG_1GB=y # CONFIG_2GB is not set # CONFIG_3GB is not set # CONFIG_MATH_EMULATION is not set CONFIG_MTRR=y CONFIG_HAVE_DEC_LOCK=y # CONFIG_KEXEC is not set # # Power management options (ACPI, APM) # CONFIG_PM=y # CONFIG_SOFTWARE_SUSPEND is not set # # ACPI Support # CONFIG_ACPI=y CONFIG_ACPI_BOOT=y CONFIG_ACPI_AC=y CONFIG_ACPI_BATTERY=y CONFIG_ACPI_BUTTON=y CONFIG_ACPI_FAN=y CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_THERMAL=y # CONFIG_ACPI_TOSHIBA is not set # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_BUS=y CONFIG_ACPI_INTERPRETER=y CONFIG_ACPI_EC=y CONFIG_ACPI_POWER=y CONFIG_ACPI_PCI=y CONFIG_ACPI_SYSTEM=y # CONFIG_APM is not set # # CPU Frequency scaling # # CONFIG_CPU_FREQ is not set # # Bus options (PCI, PCMCIA, EISA, MCA, ISA) # CONFIG_PCI=y # CONFIG_PCI_GOBIOS is not set # CONFIG_PCI_GODIRECT is not set CONFIG_PCI_GOANY=y CONFIG_PCI_BIOS=y CONFIG_PCI_DIRECT=y # CONFIG_PCI_LEGACY_PROC is not set CONFIG_PCI_NAMES=y # CONFIG_ISA is not set # CONFIG_MCA is not set # CONFIG_SCx200 is not set CONFIG_HOTPLUG=y # # PCMCIA/CardBus support # CONFIG_PCMCIA=y CONFIG_CARDBUS=y # CONFIG_I82092 is not set # CONFIG_I82365 is not set # CONFIG_TCIC is not set # # PCI Hotplug Support # # CONFIG_HOTPLUG_PCI is not set # # Executable file formats # CONFIG_KCORE_ELF=y # CONFIG_KCORE_AOUT is not set # CONFIG_BINFMT_AOUT is not set CONFIG_BINFMT_ELF=y CONFIG_BINFMT_MISC=m # # Memory Technology Devices (MTD) # # CONFIG_MTD is not set # # Parallel port support # # CONFIG_PARPORT is not set # # Plug and Play support # # CONFIG_PNP is not set # # Block devices # CONFIG_BLK_DEV_FD=m # CONFIG_BLK_CPQ_DA is not set # CONFIG_BLK_CPQ_CISS_DA is not set # CONFIG_BLK_DEV_DAC960 is not set # CONFIG_BLK_DEV_UMEM is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_NBD=m # CONFIG_BLK_DEV_RAM is not set # CONFIG_BLK_DEV_INITRD is not set # CONFIG_LBD is not set # # ATA/ATAPI/MFM/RLL device support # CONFIG_IDE=y # # IDE, ATA and ATAPI Block devices # CONFIG_BLK_DEV_IDE=y # # Please see Documentation/ide.txt for help/info on IDE drives # # CONFIG_BLK_DEV_HD_IDE is not set # CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_IDEDISK=y CONFIG_IDEDISK_MULTI_MODE=y # CONFIG_IDEDISK_STROKE is not set # CONFIG_BLK_DEV_IDECS is not set CONFIG_BLK_DEV_IDECD=y # CONFIG_BLK_DEV_IDEFLOPPY is not set # CONFIG_IDE_TASK_IOCTL is not set # # IDE chipset support/bugfixes # # CONFIG_BLK_DEV_CMD640 is not set CONFIG_BLK_DEV_IDEPCI=y # CONFIG_BLK_DEV_GENERIC is not set # CONFIG_IDEPCI_SHARE_IRQ is not set CONFIG_BLK_DEV_IDEDMA_PCI=y # CONFIG_BLK_DEV_IDE_TCQ is not set # CONFIG_BLK_DEV_OFFBOARD is not set # CONFIG_BLK_DEV_IDEDMA_FORCED is not set CONFIG_IDEDMA_PCI_AUTO=y # CONFIG_IDEDMA_ONLYDISK is not set CONFIG_BLK_DEV_IDEDMA=y # CONFIG_IDEDMA_PCI_WIP is not set CONFIG_BLK_DEV_ADMA=y # CONFIG_BLK_DEV_AEC62XX is not set # CONFIG_BLK_DEV_ALI15X3 is not set # CONFIG_BLK_DEV_AMD74XX is not set # CONFIG_BLK_DEV_CMD64X is not set # CONFIG_BLK_DEV_TRIFLEX is not set # CONFIG_BLK_DEV_CY82C693 is not set # CONFIG_BLK_DEV_CS5520 is not set # CONFIG_BLK_DEV_HPT34X is not set # CONFIG_BLK_DEV_HPT366 is not set # CONFIG_BLK_DEV_SC1200 is not set CONFIG_BLK_DEV_PIIX=y # CONFIG_BLK_DEV_NS87415 is not set # CONFIG_BLK_DEV_OPTI621 is not set # CONFIG_BLK_DEV_PDC202XX_OLD is not set # CONFIG_BLK_DEV_PDC202XX_NEW is not set # CONFIG_BLK_DEV_RZ1000 is not set # CONFIG_BLK_DEV_SVWKS is not set # CONFIG_BLK_DEV_SIIMAGE is not set # CONFIG_BLK_DEV_SIS5513 is not set # CONFIG_BLK_DEV_SLC90E66 is not set # CONFIG_BLK_DEV_TRM290 is not set # CONFIG_BLK_DEV_VIA82CXXX is not set CONFIG_IDEDMA_AUTO=y # CONFIG_IDEDMA_IVB is not set CONFIG_BLK_DEV_IDE_MODES=y # # SCSI device support # # CONFIG_SCSI is not set # # Multi-device support (RAID and LVM) # # CONFIG_MD is not set # # Fusion MPT device support # # # IEEE 1394 (FireWire) support (EXPERIMENTAL) # # CONFIG_IEEE1394 is not set # # I2O device support # # CONFIG_I2O is not set # # Networking support # CONFIG_NET=y # # Networking options # CONFIG_PACKET=y CONFIG_PACKET_MMAP=y # CONFIG_NETLINK_DEV is not set CONFIG_NETFILTER=y # CONFIG_NETFILTER_DEBUG is not set CONFIG_UNIX=y # CONFIG_NET_KEY is not set CONFIG_INET=y CONFIG_IP_MULTICAST=y # CONFIG_IP_ADVANCED_ROUTER is not set # CONFIG_IP_PNP is not set # CONFIG_NET_IPIP is not set # CONFIG_NET_IPGRE is not set # CONFIG_IP_MROUTE is not set # CONFIG_ARPD is not set # CONFIG_INET_ECN is not set # CONFIG_SYN_COOKIES is not set # CONFIG_INET_AH is not set # CONFIG_INET_ESP is not set # CONFIG_INET_IPCOMP is not set # # IP: Netfilter Configuration # CONFIG_IP_NF_CONNTRACK=m CONFIG_IP_NF_FTP=m CONFIG_IP_NF_IRC=m CONFIG_IP_NF_TFTP=m CONFIG_IP_NF_AMANDA=m # CONFIG_IP_NF_QUEUE is not set CONFIG_IP_NF_IPTABLES=m CONFIG_IP_NF_MATCH_LIMIT=m CONFIG_IP_NF_MATCH_MAC=m CONFIG_IP_NF_MATCH_PKTTYPE=m CONFIG_IP_NF_MATCH_MARK=m CONFIG_IP_NF_MATCH_MULTIPORT=m CONFIG_IP_NF_MATCH_TOS=m CONFIG_IP_NF_MATCH_ECN=m CONFIG_IP_NF_MATCH_DSCP=m # CONFIG_IP_NF_MATCH_AH_ESP is not set CONFIG_IP_NF_MATCH_LENGTH=m CONFIG_IP_NF_MATCH_TTL=m CONFIG_IP_NF_MATCH_TCPMSS=m CONFIG_IP_NF_MATCH_HELPER=m CONFIG_IP_NF_MATCH_STATE=m CONFIG_IP_NF_MATCH_CONNTRACK=m CONFIG_IP_NF_MATCH_UNCLEAN=m CONFIG_IP_NF_MATCH_OWNER=m CONFIG_IP_NF_FILTER=m # CONFIG_IP_NF_TARGET_REJECT is not set # CONFIG_IP_NF_TARGET_MIRROR is not set # CONFIG_IP_NF_NAT is not set # CONFIG_IP_NF_MANGLE is not set # CONFIG_IP_NF_TARGET_LOG is not set # CONFIG_IP_NF_TARGET_ULOG is not set # CONFIG_IP_NF_TARGET_TCPMSS is not set # CONFIG_IP_NF_ARPTABLES is not set # CONFIG_IP_NF_COMPAT_IPCHAINS is not set # CONFIG_IP_NF_COMPAT_IPFWADM is not set # CONFIG_IPV6 is not set # CONFIG_XFRM_USER is not set # # SCTP Configuration (EXPERIMENTAL) # CONFIG_IPV6_SCTP__=y # CONFIG_IP_SCTP is not set # CONFIG_ATM is not set # CONFIG_VLAN_8021Q is not set # CONFIG_LLC is not set # CONFIG_DECNET is not set # CONFIG_BRIDGE is not set # CONFIG_X25 is not set # CONFIG_LAPB is not set # CONFIG_NET_DIVERT is not set # CONFIG_ECONET is not set # CONFIG_WAN_ROUTER is not set # CONFIG_NET_FASTROUTE is not set # CONFIG_NET_HW_FLOWCONTROL is not set # # QoS and/or fair queueing # # CONFIG_NET_SCHED is not set # # Network testing # # CONFIG_NET_PKTGEN is not set CONFIG_NETDEVICES=y # # ARCnet devices # # CONFIG_ARCNET is not set # CONFIG_DUMMY is not set # CONFIG_BONDING is not set # CONFIG_EQUALIZER is not set CONFIG_TUN=m # CONFIG_ETHERTAP is not set # # Ethernet (10 or 100Mbit) # CONFIG_NET_ETHERNET=y # CONFIG_MII is not set # CONFIG_HAPPYMEAL is not set # CONFIG_SUNGEM is not set CONFIG_NET_VENDOR_3COM=y CONFIG_VORTEX=m # CONFIG_TYPHOON is not set # # Tulip family network device support # # CONFIG_NET_TULIP is not set # CONFIG_HP100 is not set # CONFIG_NET_PCI is not set # # Ethernet (1000 Mbit) # # CONFIG_ACENIC is not set # CONFIG_DL2K is not set # CONFIG_E1000 is not set # CONFIG_NS83820 is not set # CONFIG_HAMACHI is not set # CONFIG_YELLOWFIN is not set # CONFIG_R8169 is not set # CONFIG_SK98LIN is not set # CONFIG_TIGON3 is not set # # Ethernet (10000 Mbit) # # CONFIG_IXGB is not set # CONFIG_FDDI is not set # CONFIG_HIPPI is not set # CONFIG_PPP is not set # CONFIG_SLIP is not set # # Wireless LAN (non-hamradio) # # CONFIG_NET_RADIO is not set # # Token Ring devices (depends on LLC=y) # # CONFIG_RCPCI is not set # CONFIG_SHAPER is not set # # Wan interfaces # # CONFIG_WAN is not set # # PCMCIA network device support # # CONFIG_NET_PCMCIA is not set # # Amateur Radio support # # CONFIG_HAMRADIO is not set # # IrDA (infrared) support # # CONFIG_IRDA is not set # # ISDN subsystem # # CONFIG_ISDN_BOOL is not set # # Telephony Support # # CONFIG_PHONE is not set # # Input device support # CONFIG_INPUT=y # # Userland interfaces # CONFIG_INPUT_MOUSEDEV=y CONFIG_INPUT_MOUSEDEV_PSAUX=y CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 # CONFIG_INPUT_JOYDEV is not set # CONFIG_INPUT_TSDEV is not set # CONFIG_INPUT_EVDEV is not set # CONFIG_INPUT_EVBUG is not set # # Input I/O drivers # # CONFIG_GAMEPORT is not set CONFIG_SOUND_GAMEPORT=y CONFIG_SERIO=y CONFIG_SERIO_I8042=y # CONFIG_SERIO_SERPORT is not set # CONFIG_SERIO_CT82C710 is not set # # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y CONFIG_KEYBOARD_ATKBD=y # CONFIG_KEYBOARD_SUNKBD is not set # CONFIG_KEYBOARD_XTKBD is not set # CONFIG_KEYBOARD_NEWTON is not set CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=y # CONFIG_MOUSE_SERIAL is not set # CONFIG_INPUT_JOYSTICK is not set # CONFIG_INPUT_TOUCHSCREEN is not set # CONFIG_INPUT_MISC is not set # # Character devices # CONFIG_VT=y CONFIG_VT_CONSOLE=y CONFIG_HW_CONSOLE=y # CONFIG_SERIAL_NONSTANDARD is not set # # Serial drivers # # CONFIG_SERIAL_8250 is not set # # Non-8250 serial port support # CONFIG_UNIX98_PTYS=y CONFIG_UNIX98_PTY_COUNT=256 # # I2C support # # CONFIG_I2C is not set # # I2C Hardware Sensors Mainboard support # # # I2C Hardware Sensors Chip support # # CONFIG_I2C_SENSOR is not set # # Mice # # CONFIG_BUSMOUSE is not set # CONFIG_QIC02_TAPE is not set # # IPMI # # CONFIG_IPMI_HANDLER is not set # # Watchdog Cards # # CONFIG_WATCHDOG is not set # CONFIG_HW_RANDOM is not set # CONFIG_NVRAM is not set CONFIG_RTC=y # CONFIG_DTLK is not set # CONFIG_R3964 is not set # CONFIG_APPLICOM is not set # CONFIG_SONYPI is not set # # Ftape, the floppy tape device driver # # CONFIG_FTAPE is not set CONFIG_AGP=y # CONFIG_AGP_ALI is not set # CONFIG_AGP_AMD is not set # CONFIG_AGP_AMD_8151 is not set CONFIG_AGP_INTEL=y # CONFIG_AGP_NVIDIA is not set # CONFIG_AGP_SIS is not set # CONFIG_AGP_SWORKS is not set # CONFIG_AGP_VIA is not set # CONFIG_DRM is not set # # PCMCIA character devices # # CONFIG_SYNCLINK_CS is not set # CONFIG_MWAVE is not set # CONFIG_RAW_DRIVER is not set # CONFIG_HANGCHECK_TIMER is not set # # Multimedia devices # # CONFIG_VIDEO_DEV is not set # # Digital Video Broadcasting Devices # # CONFIG_DVB is not set # # File systems # CONFIG_EXT2_FS=y # CONFIG_EXT2_FS_XATTR is not set # CONFIG_EXT3_FS is not set # CONFIG_JBD is not set # CONFIG_REISERFS_FS is not set # CONFIG_JFS_FS is not set # CONFIG_XFS_FS is not set # CONFIG_MINIX_FS is not set # CONFIG_ROMFS_FS is not set # CONFIG_QUOTA is not set # CONFIG_AUTOFS_FS is not set CONFIG_AUTOFS4_FS=m # # CD-ROM/DVD Filesystems # CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_ZISOFS_FS=m CONFIG_UDF_FS=m # # DOS/FAT/NT Filesystems # CONFIG_FAT_FS=m # CONFIG_MSDOS_FS is not set CONFIG_VFAT_FS=m # CONFIG_NTFS_FS is not set # # Pseudo filesystems # CONFIG_PROC_FS=y # CONFIG_DEVFS_FS is not set CONFIG_DEVPTS_FS=y CONFIG_TMPFS=y CONFIG_RAMFS=y # # Miscellaneous filesystems # # CONFIG_ADFS_FS is not set # CONFIG_AFFS_FS is not set # CONFIG_HFS_FS is not set # CONFIG_BEFS_FS is not set # CONFIG_BFS_FS is not set # CONFIG_EFS_FS is not set # CONFIG_CRAMFS is not set # CONFIG_VXFS_FS is not set # CONFIG_HPFS_FS is not set # CONFIG_QNX4FS_FS is not set # CONFIG_SYSV_FS is not set # CONFIG_UFS_FS is not set # # Network File Systems # CONFIG_NFS_FS=m CONFIG_NFS_V3=y # CONFIG_NFS_V4 is not set CONFIG_NFSD=m CONFIG_NFSD_V3=y # CONFIG_NFSD_V4 is not set CONFIG_NFSD_TCP=y CONFIG_LOCKD=m CONFIG_LOCKD_V4=y CONFIG_EXPORTFS=m CONFIG_SUNRPC=m # CONFIG_SUNRPC_GSS is not set CONFIG_SMB_FS=m CONFIG_SMB_NLS_DEFAULT=y CONFIG_SMB_NLS_REMOTE="cp437" CONFIG_CIFS=m # CONFIG_NCP_FS is not set # CONFIG_CODA_FS is not set # CONFIG_INTERMEZZO_FS is not set # CONFIG_AFS_FS is not set # # Partition Types # # CONFIG_PARTITION_ADVANCED is not set CONFIG_MSDOS_PARTITION=y CONFIG_SMB_NLS=y CONFIG_NLS=y # # Native Language Support # CONFIG_NLS_DEFAULT="utf8" CONFIG_NLS_CODEPAGE_437=m # CONFIG_NLS_CODEPAGE_737 is not set # CONFIG_NLS_CODEPAGE_775 is not set CONFIG_NLS_CODEPAGE_850=m # CONFIG_NLS_CODEPAGE_852 is not set # CONFIG_NLS_CODEPAGE_855 is not set # CONFIG_NLS_CODEPAGE_857 is not set # CONFIG_NLS_CODEPAGE_860 is not set # CONFIG_NLS_CODEPAGE_861 is not set # CONFIG_NLS_CODEPAGE_862 is not set # CONFIG_NLS_CODEPAGE_863 is not set # CONFIG_NLS_CODEPAGE_864 is not set # CONFIG_NLS_CODEPAGE_865 is not set # CONFIG_NLS_CODEPAGE_866 is not set # CONFIG_NLS_CODEPAGE_869 is not set # CONFIG_NLS_CODEPAGE_936 is not set # CONFIG_NLS_CODEPAGE_950 is not set # CONFIG_NLS_CODEPAGE_932 is not set # CONFIG_NLS_CODEPAGE_949 is not set # CONFIG_NLS_CODEPAGE_874 is not set # CONFIG_NLS_ISO8859_8 is not set # CONFIG_NLS_CODEPAGE_1250 is not set # CONFIG_NLS_CODEPAGE_1251 is not set CONFIG_NLS_ISO8859_1=m # CONFIG_NLS_ISO8859_2 is not set # CONFIG_NLS_ISO8859_3 is not set # CONFIG_NLS_ISO8859_4 is not set # CONFIG_NLS_ISO8859_5 is not set # CONFIG_NLS_ISO8859_6 is not set # CONFIG_NLS_ISO8859_7 is not set # CONFIG_NLS_ISO8859_9 is not set # CONFIG_NLS_ISO8859_13 is not set # CONFIG_NLS_ISO8859_14 is not set CONFIG_NLS_ISO8859_15=m # CONFIG_NLS_KOI8_R is not set # CONFIG_NLS_KOI8_U is not set CONFIG_NLS_UTF8=m # # Graphics support # # CONFIG_FB is not set CONFIG_VIDEO_SELECT=y # # Console display driver support # CONFIG_VGA_CONSOLE=y # CONFIG_MDA_CONSOLE is not set CONFIG_DUMMY_CONSOLE=y # # Sound # CONFIG_SOUND=y # # Advanced Linux Sound Architecture # CONFIG_SND=y # CONFIG_SND_SEQUENCER is not set CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=y CONFIG_SND_PCM_OSS=y CONFIG_SND_RTCTIMER=y # CONFIG_SND_VERBOSE_PRINTK is not set # CONFIG_SND_DEBUG is not set # # Generic devices # # CONFIG_SND_DUMMY is not set # CONFIG_SND_MTPAV is not set # CONFIG_SND_SERIAL_U16550 is not set # CONFIG_SND_MPU401 is not set # # PCI devices # # CONFIG_SND_ALI5451 is not set # CONFIG_SND_CS46XX is not set # CONFIG_SND_CS4281 is not set # CONFIG_SND_EMU10K1 is not set # CONFIG_SND_KORG1212 is not set # CONFIG_SND_NM256 is not set # CONFIG_SND_RME32 is not set # CONFIG_SND_RME96 is not set # CONFIG_SND_RME9652 is not set # CONFIG_SND_HDSP is not set # CONFIG_SND_TRIDENT is not set CONFIG_SND_YMFPCI=y # CONFIG_SND_ALS4000 is not set # CONFIG_SND_CMIPCI is not set # CONFIG_SND_ENS1370 is not set # CONFIG_SND_ENS1371 is not set # CONFIG_SND_ES1938 is not set # CONFIG_SND_ES1968 is not set # CONFIG_SND_MAESTRO3 is not set # CONFIG_SND_FM801 is not set # CONFIG_SND_ICE1712 is not set # CONFIG_SND_ICE1724 is not set # CONFIG_SND_INTEL8X0 is not set # CONFIG_SND_SONICVIBES is not set # CONFIG_SND_VIA82XX is not set # # ALSA USB devices # # CONFIG_SND_USB_AUDIO is not set # # Open Sound System # # CONFIG_SOUND_PRIME is not set # # USB support # CONFIG_USB=y # CONFIG_USB_DEBUG is not set # # Miscellaneous USB options # CONFIG_USB_DEVICEFS=y # CONFIG_USB_BANDWIDTH is not set # CONFIG_USB_DYNAMIC_MINORS is not set # # USB Host Controller Drivers # # CONFIG_USB_EHCI_HCD is not set # CONFIG_USB_OHCI_HCD is not set CONFIG_USB_UHCI_HCD=y # # USB Device Class drivers # # CONFIG_USB_AUDIO is not set # CONFIG_USB_BLUETOOTH_TTY is not set # CONFIG_USB_MIDI is not set # CONFIG_USB_ACM is not set CONFIG_USB_PRINTER=m # # SCSI support is needed for USB Storage # # # USB Human Interface Devices (HID) # CONFIG_USB_HID=y CONFIG_USB_HIDINPUT=y # CONFIG_HID_FF is not set CONFIG_USB_HIDDEV=y # CONFIG_USB_AIPTEK is not set # CONFIG_USB_WACOM is not set # CONFIG_USB_KBTAB is not set # CONFIG_USB_POWERMATE is not set # CONFIG_USB_XPAD is not set # # USB Imaging devices # # CONFIG_USB_MDC800 is not set CONFIG_USB_SCANNER=m # # USB Multimedia devices # # CONFIG_USB_DABUSB is not set # # Video4Linux support is needed for USB Multimedia device support # # # USB Network adaptors # # CONFIG_USB_CATC is not set # CONFIG_USB_KAWETH is not set # CONFIG_USB_PEGASUS is not set # CONFIG_USB_RTL8150 is not set # CONFIG_USB_USBNET is not set # # USB port drivers # # # USB Serial Converter support # CONFIG_USB_SERIAL=m CONFIG_USB_SERIAL_GENERIC=y # CONFIG_USB_SERIAL_BELKIN is not set # CONFIG_USB_SERIAL_WHITEHEAT is not set # CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set # CONFIG_USB_SERIAL_EMPEG is not set # CONFIG_USB_SERIAL_FTDI_SIO is not set # CONFIG_USB_SERIAL_VISOR is not set CONFIG_USB_SERIAL_IPAQ=m # CONFIG_USB_SERIAL_IR is not set # CONFIG_USB_SERIAL_EDGEPORT is not set # CONFIG_USB_SERIAL_EDGEPORT_TI is not set # CONFIG_USB_SERIAL_KEYSPAN_PDA is not set # CONFIG_USB_SERIAL_KEYSPAN is not set # CONFIG_USB_SERIAL_KLSI is not set # CONFIG_USB_SERIAL_KOBIL_SCT is not set # CONFIG_USB_SERIAL_MCT_U232 is not set # CONFIG_USB_SERIAL_PL2303 is not set # CONFIG_USB_SERIAL_SAFE is not set # CONFIG_USB_SERIAL_CYBERJACK is not set # CONFIG_USB_SERIAL_XIRCOM is not set # CONFIG_USB_SERIAL_OMNINET is not set # # USB Miscellaneous drivers # # CONFIG_USB_TIGL is not set # CONFIG_USB_AUERSWALD is not set # CONFIG_USB_RIO500 is not set # CONFIG_USB_BRLVGER is not set # CONFIG_USB_LCD is not set # CONFIG_USB_TEST is not set # CONFIG_USB_GADGET is not set # # Bluetooth support # # CONFIG_BT is not set # # Profiling support # # CONFIG_PROFILING is not set # # Kernel hacking # # CONFIG_DEBUG_KERNEL is not set CONFIG_KALLSYMS=y # CONFIG_DEBUG_SPINLOCK_SLEEP is not set CONFIG_DEBUG_INFO=y # CONFIG_FRAME_POINTER is not set # # Security options # # CONFIG_SECURITY is not set # # Cryptographic options # # CONFIG_CRYPTO is not set # # Library routines # # CONFIG_CRC32 is not set CONFIG_ZLIB_INFLATE=m CONFIG_X86_BIOS_REBOOT=y --=-CTTIQ2mocEnTpwy1r5nu-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/