Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S264223AbTEOT5d (ORCPT ); Thu, 15 May 2003 15:57:33 -0400 Received: (majordomo@vger.kernel.org) by vger.kernel.org id S264226AbTEOT5c (ORCPT ); Thu, 15 May 2003 15:57:32 -0400 Received: from garnet.acns.fsu.edu ([146.201.2.25]:26766 "EHLO garnet.acns.fsu.edu") by vger.kernel.org with ESMTP id S264223AbTEOT5G (ORCPT ); Thu, 15 May 2003 15:57:06 -0400 Message-ID: <3EC3F401.80507@cox.net> Date: Thu, 15 May 2003 16:09:37 -0400 From: David van Hoose User-Agent: Mozilla/5.0 (X11; U; Linux i686; en-US; rv:1.2.1) Gecko/20030225 X-Accept-Language: en-us, en MIME-Version: 1.0 To: Greg KH CC: linux-kernel@vger.kernel.org Subject: Re: USB not accepting addresses in bk9 References: <3EC310C3.9060606@cox.net> <20030515070800.GA6497@kroah.com> <3EC3F02E.1010604@cox.net> <20030515200446.GA10318@kroah.com> In-Reply-To: <20030515200446.GA10318@kroah.com> Content-Type: multipart/mixed; boundary="------------030606030500080508000603" Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 18213 Lines: 386 This is a multi-part message in MIME format. --------------030606030500080508000603 Content-Type: text/plain; charset=us-ascii; format=flowed Content-Transfer-Encoding: 7bit Greg KH wrote: > On Thu, May 15, 2003 at 03:53:18PM -0400, David van Hoose wrote: > >>Greg KH wrote: >> >>>On Thu, May 15, 2003 at 12:00:03AM -0400, David van Hoose wrote: >>> >>> >>>>Sometime between 2.5.69-bk4 and 2.5.69-bk8, something with related to >>>>the USB was messed up. I get the below lines in my dmesg. >>>>hub 2-0:0: new USB device on port 1, assigned address 2 >>>>usb 2-1: USB device not accepting new address=2 (error=-110) >>>>hub 2-0:0: new USB device on port 1, assigned address 3 >>>>usb 2-1: USB device not accepting new address=3 (error=-110) >>>> >>>>The first device is my Logitech Cordless Optical Trackball. >>>>The second device is my TI USB Graphlink. >>>> >>>>The Trackball still works. Not sure about the graphlink as I don't have >>>>the software installed yet. :-/ >>> >>>How can the device work if the USB bus rejected it? Also, does >>>/proc/interrupts increment for the USB controller when you plug a device >>>in? >> >>No idea. It seems to increment the usb line in /proc/interrupts. >>I've attached a dmesg with verbose debugging. > > -ENOATTACHMENT :) Ack. Must have accidently hit cancel rather than okay. Here it is.] By the way, this is from bk10. Same config except for usb and alsa debugging options. >>>>I used the same config for bk4 as I did for bk8. It've attached my >>>>config for bk9 since it is the same anyway. >>> >>>Care to do a binary search of bk4 to bk8 to try to find the problem? >>>Should only take you 2 reboots at most :) >> >>What do you want me to do? I don't know if I have the skills yet to code >>for the kernel, so the least I can do is test it. :-) > > > Ok, bk4 works for you and bk8 doesn't. So try the following: > - test bk6 > - if bk6 fails test bk5 > - if bk5 fails, the problem happened between bk4 and bk5 > - if bk5 works, the problem happened bewtwen bk5 and bk6 > - if bk6 works test bk7 > - if bk7 fails, the problem happened between bk6 and bk7 > - if bk7 works, the problem happened between bk7 and bk8 > > And let us know what the result is, please. Will do that tonight. Thanks, David --------------030606030500080508000603 Content-Type: text/plain; name="dmesg-2.5.69-bk10" Content-Transfer-Encoding: 7bit Content-Disposition: inline; filename="dmesg-2.5.69-bk10" 2 NET 4.0 IEEE 802.2 extended support NET4.0 IEEE 802.2 BSD sockets, Jay Schulist, 2001, Arnaldo C. Melo, 2002-2003 NET4: Linux TCP/IP 1.0 for NET4.0 IP: routing cache hash table of 4096 buckets, 32Kbytes TCP: Hash tables configured (established 32768 bind 65536) ip_conntrack version 2.1 (4095 buckets, 32760 max) - 300 bytes per conntrack ip_tables: (C) 2000-2002 Netfilter core team Initializing IPsec netlink socket NET4: Unix domain sockets 1.0/SMP for Linux NET4.0. IPv6 v0.8 for NET4.0 IPv6 over IPv4 tunneling driver ip6_tables: (C) 2000-2002 Netfilter core team RAMDISK: Compressed image found at block 0 Freeing initrd memory: 221k freed VFS: Mounted root (ext2 filesystem). kjournald starting. Commit interval 5 seconds EXT3-fs: mounted filesystem with ordered data mode. Freeing unused kernel memory: 144k freed drivers/usb/core/usb.c: registered new driver usbfs drivers/usb/core/usb.c: registered new driver hub ohci-hcd: 2003 Feb 24 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) ohci-hcd: block sizes: ed 64 td 64 ohci-hcd 00:03.0: Silicon Integrated S 7001 ohci-hcd 00:03.0: irq 9, pci mem e082d000 Please use the 'usbfs' filetype instead, the 'usbdevfs' name is deprecated. ohci-hcd 00:03.0: new USB bus registered, assigned bus number 1 ohci-hcd 00:03.0: USB HC reset_hc 00:03.0: ctrl = 0x0 ; ohci-hcd 00:03.0: root hub device address 1 usb usb1: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb1: Product: Silicon Integrated S 7001 usb usb1: Manufacturer: Linux 2.5.69-bk10 ohci-hcd usb usb1: SerialNumber: 00:03.0 drivers/usb/core/usb.c: usb_hotplug usb usb1: usb_new_device - registering interface 1-0:0 drivers/usb/core/usb.c: usb_hotplug hub 1-0:0: usb_device_probe hub 1-0:0: usb_device_probe - got id hub 1-0:0: USB hub found hub 1-0:0: 2 ports detected hub 1-0:0: standalone hub hub 1-0:0: ganged power switching hub 1-0:0: global over-current protection hub 1-0:0: Port indicators are not supported hub 1-0:0: power on to power good time: 2ms hub 1-0:0: hub controller current requirement: 0mA hub 1-0:0: local power source is good hub 1-0:0: no over-current condition exists hub 1-0:0: enabling power on all ports ohci-hcd 00:03.0: created debug files ohci-hcd 00:03.0: OHCI controller state ohci-hcd 00:03.0: OHCI 1.0, with legacy support registers ohci-hcd 00:03.0: control 0x08f HCFS=operational IE PLE CBSR=3 ohci-hcd 00:03.0: cmdstatus 0x00000 SOC=0 ohci-hcd 00:03.0: intrstatus 0x00000044 RHSC SF ohci-hcd 00:03.0: intrenable 0x80000002 MIE WDH ohci-hcd 00:03.0: hcca frame #002b ohci-hcd 00:03.0: roothub.a 01000202 POTPGT=1 NPS NDP=2 ohci-hcd 00:03.0: roothub.b 00000000 PPCM=0000 DR=0000 ohci-hcd 00:03.0: roothub.status 00000000 ohci-hcd 00:03.0: roothub.portstatus [0] 0x00010301 CSC LSDA PPS CCS ohci-hcd 00:03.0: roothub.portstatus [1] 0x00000100 PPS ohci-hcd 00:03.1: Silicon Integrated S 7001 (#2) ohci-hcd 00:03.1: irq 9, pci mem e082f000 ohci-hcd 00:03.1: new USB bus registered, assigned bus number 2 ohci-hcd 00:03.1: USB HC reset_hc 00:03.1: ctrl = 0x0 ; ohci-hcd 00:03.1: root hub device address 1 usb usb2: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb2: Product: Silicon Integrated S 7001 (#2) usb usb2: Manufacturer: Linux 2.5.69-bk10 ohci-hcd usb usb2: SerialNumber: 00:03.1 drivers/usb/core/usb.c: usb_hotplug usb usb2: usb_new_device - registering interface 2-0:0 drivers/usb/core/usb.c: usb_hotplug hub 2-0:0: usb_device_probe hub 2-0:0: usb_device_probe - got id hub 2-0:0: USB hub found hub 2-0:0: 2 ports detected hub 2-0:0: standalone hub hub 2-0:0: ganged power switching hub 2-0:0: global over-current protection hub 2-0:0: Port indicators are not supported hub 2-0:0: power on to power good time: 2ms hub 2-0:0: hub controller current requirement: 0mA hub 2-0:0: local power source is good hub 2-0:0: no over-current condition exists hub 2-0:0: enabling power on all ports ohci-hcd 00:03.1: created debug files ohci-hcd 00:03.1: OHCI controller state ohci-hcd 00:03.1: OHCI 1.0, with legacy support registers ohci-hcd 00:03.1: control 0x08f HCFS=operational IE PLE CBSR=3 ohci-hcd 00:03.1: cmdstatus 0x00000 SOC=0 ohci-hcd 00:03.1: intrstatus 0x00000044 RHSC SF ohci-hcd 00:03.1: intrenable 0x80000002 MIE WDH ohci-hcd 00:03.1: hcca frame #0034 ohci-hcd 00:03.1: roothub.a 01000202 POTPGT=1 NPS NDP=2 ohci-hcd 00:03.1: roothub.b 00000000 PPCM=0000 DR=0000 ohci-hcd 00:03.1: roothub.status 00000000 ohci-hcd 00:03.1: roothub.portstatus [0] 0x00010101 CSC PPS CCS ohci-hcd 00:03.1: roothub.portstatus [1] 0x00000100 PPS ohci-hcd 00:03.2: Silicon Integrated S 7001 (#3) ohci-hcd 00:03.2: irq 9, pci mem e0831000 ohci-hcd 00:03.2: new USB bus registered, assigned bus number 3 ohci-hcd 00:03.2: USB HC reset_hc 00:03.2: ctrl = 0x0 ; ohci-hcd 00:03.2: root hub device address 1 usb usb3: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb3: Product: Silicon Integrated S 7001 (#3) usb usb3: Manufacturer: Linux 2.5.69-bk10 ohci-hcd usb usb3: SerialNumber: 00:03.2 drivers/usb/core/usb.c: usb_hotplug usb usb3: usb_new_device - registering interface 3-0:0 drivers/usb/core/usb.c: usb_hotplug hub 3-0:0: usb_device_probe hub 3-0:0: usb_device_probe - got id hub 3-0:0: USB hub found hub 3-0:0: 2 ports detected hub 3-0:0: standalone hub hub 3-0:0: ganged power switching hub 3-0:0: global over-current protection hub 3-0:0: Port indicators are not supported hub 3-0:0: power on to power good time: 2ms hub 3-0:0: hub controller current requirement: 0mA hub 3-0:0: local power source is good hub 3-0:0: no over-current condition exists hub 3-0:0: enabling power on all ports ohci-hcd 00:03.2: created debug files ohci-hcd 00:03.2: OHCI controller state ohci-hcd 00:03.2: OHCI 1.0, with legacy support registers ohci-hcd 00:03.2: control 0x08f HCFS=operational IE PLE CBSR=3 ohci-hcd 00:03.2: cmdstatus 0x00000 SOC=0 ohci-hcd 00:03.2: intrstatus 0x00000004 SF ohci-hcd 00:03.2: intrenable 0x80000002 MIE WDH ohci-hcd 00:03.2: hcca frame #0025 ohci-hcd 00:03.2: roothub.a 01000202 POTPGT=1 NPS NDP=2 ohci-hcd 00:03.2: roothub.b 00000000 PPCM=0000 DR=0000 ohci-hcd 00:03.2: roothub.status 00000000 ohci-hcd 00:03.2: roothub.portstatus [0] 0x00000100 PPS ohci-hcd 00:03.2: roothub.portstatus [1] 0x00000100 PPS drivers/usb/host/ehci-hcd.c: block sizes: qh 128 qtd 96 itd 160 sitd 64 ehci-hcd 00:03.3: Silicon Integrated S SiS7002 USB 2.0 ehci-hcd 00:03.3: irq 9, pci mem e0835000 ehci-hcd 00:03.3: new USB bus registered, assigned bus number 4 ehci-hcd 00:03.3: ehci_start hcs_params 0x103206 dbg=1 cc=3 pcc=2 ordered !ppc ports=6 ehci-hcd 00:03.3: ehci_start hcc_params 7070 thresh 7 uframes 1024 ehci-hcd 00:03.3: capability 0001 at 70 ehci-hcd 00:03.3: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT PCI: cache line size of 128 is not supported by device 00:03.3 ehci-hcd 00:03.3: init command 010001 (park)=0 ithresh=1 period=1024 RUN ehci-hcd 00:03.3: USB 2.0 enabled, EHCI 1.00, driver 2003-Jan-22 ehci-hcd 00:03.3: root hub device address 1 usb usb4: new device strings: Mfr=3, Product=2, SerialNumber=1 usb usb4: Product: Silicon Integrated S SiS7002 USB 2.0 usb usb4: Manufacturer: Linux 2.5.69-bk10 ehci-hcd usb usb4: SerialNumber: 00:03.3 drivers/usb/core/usb.c: usb_hotplug usb usb4: usb_new_device - registering interface 4-0:0 drivers/usb/core/usb.c: usb_hotplug hub 4-0:0: usb_device_probe hub 4-0:0: usb_device_probe - got id hub 4-0:0: USB hub found hub 4-0:0: 6 ports detected hub 4-0:0: standalone hub hub 4-0:0: ganged power switching hub 4-0:0: individual port over-current protection hub 4-0:0: Single TT hub 4-0:0: TT requires at most 8 FS bit times hub 4-0:0: Port indicators are not supported hub 4-0:0: power on to power good time: 0ms hub 4-0:0: hub controller current requirement: 0mA hub 4-0:0: local power source is good hub 4-0:0: no over-current condition exists hub 4-0:0: enabling power on all ports ohci-hcd 00:03.0: GetStatus roothub.portstatus [1] = 0x00010300 CSC LSDA PPS hub 1-0:0: port 1, status 300, change 1, 1.5 Mb/s drivers/usb/core/usb.c: registered new driver hiddev drivers/usb/core/usb.c: registered new driver hid drivers/usb/input/hid-core.c: v2.0:USB HID core driver ohci-hcd 00:03.1: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS hub 2-0:0: port 1, status 100, change 1, 12 Mb/s ehci-hcd 00:03.3: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 4-0:0: port 1, status 501, change 1, 480 Mb/s hub 4-0:0: debounce: port 1: delay 100ms stable 4 status 0x501 ehci-hcd 00:03.3: port 1 low speed --> companion ehci-hcd 00:03.3: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC ehci-hcd 00:03.3: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT hub 4-0:0: port 2, status 501, change 1, 480 Mb/s hub 4-0:0: debounce: port 2: delay 100ms stable 4 status 0x501 hub 4-0:0: port 2 not reset yet, waiting 10ms hub 4-0:0: port 2 not reset yet, waiting 10ms EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda2, internal journal hub 4-0:0: port 2 not reset yet, waiting 200ms Adding 1004020k swap on /dev/hda5. Priority:-1 extents:1 ehci-hcd 00:03.3: port 2 full speed --> companion ehci-hcd 00:03.3: GetStatus port 2 status 003001 POWER OWNER sig=se0 CONNECT ohci-hcd 00:03.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS hub 1-0:0: port 1, status 301, change 1, 1.5 Mb/s hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 ohci-hcd 00:03.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS hub 1-0:0: new USB device on port 1, assigned address 2 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Receiver usb 1-1: Manufacturer: Logitech drivers/usb/core/usb.c: usb_hotplug usb 1-1: usb_new_device - registering interface 1-1:0 drivers/usb/core/usb.c: usb_hotplug hid 1-1:0: usb_device_probe hid 1-1:0: usb_device_probe - got id input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-00:03.0-1 ohci-hcd 00:03.1: GetStatus roothub.portstatus [1] = 0x00010101 CSC PPS CCS hub 2-0:0: port 1, status 101, change 1, 12 Mb/s hub 2-0:0: debounce: port 1: delay 100ms stable 4 status 0x101 ohci-hcd 00:03.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS hub 2-0:0: new USB device on port 1, assigned address 2 ohci-hcd 00:03.1: urb df236708 path 1 ep0out 5ec20000 cc 5 --> status -110 ohci-hcd 00:03.1: urb df4aa21c path 1 ep0out 5f120000 cc 5 --> status -110 intel8x0: clocking to 48000 ALSA sound/pci/intel8x0.c:2563: joystick(s) found Linux agpgart interface v0.100 (c) Dave Jones agpgart: Trying generic SiS routines for device id: 0648 agpgart: Maximum main memory to use for agp memory: 439M agpgart: AGP aperture is 128M @ 0xe0000000 usb 2-1: USB device not accepting new address=2 (error=-110) ohci-hcd 00:03.1: GetStatus roothub.portstatus [1] = 0x00100103 PRSC PPS PES CCS hub 2-0:0: new USB device on port 1, assigned address 3 ohci-hcd 00:03.1: urb def5d334 path 1 ep0out 5f120000 cc 5 --> status -110 ohci-hcd 00:03.1: urb def5d334 path 1 ep0out 5ec20000 cc 5 --> status -110 usb 2-1: USB device not accepting new address=3 (error=-110) kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda1, internal journal EXT3-fs: mounted filesystem with ordered data mode. kjournald starting. Commit interval 5 seconds EXT3 FS 2.4-0.9.16, 02 Dec 2001 on hda7, internal journal EXT3-fs: mounted filesystem with ordered data mode. ohci1394: $Rev: 921 $ Ben Collins ohci1394_0: Unexpected PCI resource length of 1000! ohci1394_0: OHCI-1394 1.0 (PCI): IRQ=[10] MMIO=[de800000-de8007ff] Max Packet=[2048] ieee1394: unsolicited response packet received - np ieee1394: contents: ffc00160 ffc00000 00000000 becd0404 ieee1394: unsolicited response packet received - np ieee1394: contents: ffc00560 ffc00000 00000000 becd0404 ieee1394: unsolicited response packet received - np ieee1394: contents: ffc00960 ffc00000 00000000 becd0404 ieee1394: ConfigROM quadlet transaction error for node 00:1023 Disabled Privacy Extensions on device c036be20(lo) sis900.c: v1.08.06 9/24/2002 eth0: Realtek RTL8201 PHY transceiver found at address 1. eth0: Using transceiver found at address 1 as default eth0: SiS 900 PCI Fast Ethernet at 0x9800, IRQ 9, 00:e0:18:9d:4f:d0. eth0: Media Link On 100mbps full-duplex Linux Tulip driver version 1.1.13 (May 11, 2002) eth1: ADMtek Comet rev 17 at 0xe0833000, 00:20:78:04:68:6F, IRQ 9. eth0: no IPv6 routers present drivers/usb/serial/usb-serial.c: USB Serial support registered for Generic drivers/usb/core/usb.c: registered new driver usbserial drivers/usb/serial/usb-serial.c: USB Serial Driver core v2.0 nvidia: module license 'NVIDIA' taints kernel. 0: nvidia: loading NVIDIA Linux x86 nvidia.o Kernel Module 1.0-4363 Sat Apr 19 17:46:46 PDT 2003 agpgart: Found an AGP 2.0 compliant device at 00:00.0. agpgart: Putting AGP V2 device at 00:00.0 into 4x mode agpgart: Putting AGP V2 device at 01:00.0 into 4x mode ehci-hcd 00:03.3: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC hub 4-0:0: port 1, status 0, change 1, 12 Mb/s ehci-hcd 00:03.3: GetStatus port 2 status 001002 POWER sig=se0 CSC hub 4-0:0: port 2, status 100, change 1, 12 Mb/s ohci-hcd 00:03.1: GetStatus roothub.portstatus [1] = 0x00010100 CSC PPS hub 2-0:0: port 1, status 100, change 1, 12 Mb/s ohci-hcd 00:03.0: urb c179ac80 path 1 ep1in 5f160000 cc 5 --> status -110 ohci-hcd 00:03.0: urb c179ac80 path 1 ep1in 5f160000 cc 5 --> status -110 ohci-hcd 00:03.0: urb c179ac80 path 1 ep1in 5f160000 cc 5 --> status -110 ohci-hcd 00:03.0: urb c179ac80 path 1 ep1in 5f160000 cc 5 --> status -110 ohci-hcd 00:03.0: urb c179ac80 path 1 ep1in 5f160000 cc 5 --> status -110 ohci-hcd 00:03.0: urb c179ac80 path 1 ep1in 5f160000 cc 5 --> status -110 ohci-hcd 00:03.0: urb c179ac80 path 1 ep1in 5f160000 cc 5 --> status -110 ohci-hcd 00:03.0: urb c179ac80 path 1 ep1in 5f160000 cc 5 --> status -110 ohci-hcd 00:03.0: GetStatus roothub.portstatus [1] = 0x00030300 PESC CSC LSDA PPS hub 1-0:0: port 1, status 300, change 3, 1.5 Mb/s usb 1-1: USB disconnect, address 2 usb 1-1: unregistering interfaces usb 1-1: hcd_unlink_urb df2368ac fail -22 usb 1-1: hcd_unlink_urb c179ac80 fail -22 drivers/usb/core/usb.c: usb_hotplug usb 1-1: unregistering device drivers/usb/core/usb.c: usb_hotplug ehci-hcd 00:03.3: GetStatus port 1 status 001002 POWER sig=se0 CSC hub 4-0:0: port 1, status 100, change 1, 12 Mb/s ohci-hcd 00:03.0: GetStatus roothub.portstatus [1] = 0x00020300 PESC LSDA PPS hub 1-0:0: port 1 enable change, status 300 ehci-hcd 00:03.3: GetStatus port 1 status 001403 POWER sig=k CSC CONNECT hub 4-0:0: port 1, status 501, change 1, 480 Mb/s hub 4-0:0: debounce: port 1: delay 100ms stable 4 status 0x501 ehci-hcd 00:03.3: port 1 low speed --> companion ehci-hcd 00:03.3: GetStatus port 1 status 003002 POWER OWNER sig=se0 CSC ohci-hcd 00:03.0: GetStatus roothub.portstatus [1] = 0x00010301 CSC LSDA PPS CCS hub 1-0:0: port 1, status 301, change 1, 1.5 Mb/s hub 1-0:0: debounce: port 1: delay 100ms stable 4 status 0x301 ohci-hcd 00:03.0: GetStatus roothub.portstatus [1] = 0x00100303 PRSC LSDA PPS PES CCS hub 1-0:0: new USB device on port 1, assigned address 3 usb 1-1: new device strings: Mfr=1, Product=2, SerialNumber=0 usb 1-1: Product: USB Receiver usb 1-1: Manufacturer: Logitech drivers/usb/core/usb.c: usb_hotplug usb 1-1: usb_new_device - registering interface 1-1:0 drivers/usb/core/usb.c: usb_hotplug hid 1-1:0: usb_device_probe hid 1-1:0: usb_device_probe - got id input: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-00:03.0-1 --------------030606030500080508000603-- - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/