Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752099AbdCCRR5 (ORCPT ); Fri, 3 Mar 2017 12:17:57 -0500 Received: from mail-wr0-f196.google.com ([209.85.128.196]:34851 "EHLO mail-wr0-f196.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751734AbdCCRRx (ORCPT ); Fri, 3 Mar 2017 12:17:53 -0500 From: Ansuel Smith To: jason@lakedaemon.net Cc: andrew@lunn.ch, gregory.clement@free-electrons.com, sebastian.hesselbarth@gmail.com, robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Ansuel Smith , Imre Kaloz , =?UTF-8?q?=C3=81lvaro=20Fern=C3=A1ndez=20Rojas?= Subject: [PATCH] ARM: DTS armada: Add support for 2 more mvebu model Date: Fri, 3 Mar 2017 18:07:35 +0100 Message-Id: <1488560855-421-1-git-send-email-ansuelsmth@gmail.com> X-Mailer: git-send-email 2.7.4 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 13539 Lines: 586 This patch add support for 2 Linksys router model (shelby and rango). With this we now support all the mvebu board on the market. Signed-off-by: Imre Kaloz Signed-off-by: Álvaro Fernández Rojas Signed-off-by: Ansuel Smith --- arch/arm/boot/dts/armada-385-linksys-rango.dts | 443 ++++++++++++++++++++++++ arch/arm/boot/dts/armada-385-linksys-shelby.dts | 115 ++++++ 2 files changed, 558 insertions(+) create mode 100644 arch/arm/boot/dts/armada-385-linksys-rango.dts create mode 100644 arch/arm/boot/dts/armada-385-linksys-shelby.dts diff --git a/arch/arm/boot/dts/armada-385-linksys-rango.dts b/arch/arm/boot/dts/armada-385-linksys-rango.dts new file mode 100644 index 0000000..61f4592 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys-rango.dts @@ -0,0 +1,443 @@ +/* + * Device Tree file for the Linksys WRT3200ACM (Rango) + * + * Copyright (C) 2016 Imre Kaloz + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include +#include +#include "armada-385.dtsi" + +/ { + model = "Linksys WRT3200ACM"; + compatible = "linksys,rango", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory { + device_type = "memory"; + reg = <0x00000000 0x20000000>; /* 512 MB */ + }; + + soc { + ranges = ; + + internal-regs { + + spi@10600 { + status = "disabled"; + }; + + i2c@11000 { + pinctrl-names = "default"; + pinctrl-0 = <&i2c0_pins>; + status = "okay"; + + tmp421@4c { + compatible = "ti,tmp421"; + reg = <0x4c>; + }; + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + compatible = "nxp,pca9635"; + reg = <0x68>; + + wan_amber@0 { + label = "rango:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "rango:white:wan"; + reg = <0x1>; + }; + + usb2@5 { + label = "rango:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "rango:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "rango:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "rango:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "rango:amber:wps"; + reg = <0x9>; + }; + }; + }; + + /* J10: VCC, NC, RX, NC, TX, GND */ + serial@12000 { + status = "okay"; + }; + + ethernet@70000 { + status = "okay"; + phy-mode = "rgmii-id"; + buffer-manager = <&bm>; + bm,pool-long = <0>; + bm,pool-short = <3>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + ethernet@34000 { + status = "okay"; + phy-mode = "sgmii"; + buffer-manager = <&bm>; + bm,pool-long = <2>; + bm,pool-short = <3>; + fixed-link { + speed = <1000>; + full-duplex; + }; + }; + + mdio { + status = "okay"; + }; + + bm@c8000 { + status = "okay"; + }; + + sata@a8000 { + status = "okay"; + }; + + /* USB part of the eSATA/USB 2.0 port */ + usb@58000 { + status = "okay"; + }; + + usb3@f8000 { + status = "okay"; + usb-phy = <&usb3_phy>; + }; + + flash@d0000 { + status = "okay"; + num-cs = <1>; + marvell,nand-keep-config; + marvell,nand-enable-arbiter; + nand-on-flash-bbt; + + partition@0 { + label = "u-boot"; + reg = <0x0000000 0x200000>; /* 2MB */ + read-only; + }; + + partition@200000 { + label = "u_env"; + reg = <0x200000 0x20000>; /* 128KB */ + }; + + partition@220000 { + label = "s_env"; + reg = <0x220000 0x40000>; /* 256KB */ + }; + + partition@7e0000 { + label = "devinfo"; + reg = <0x7e0000 0x40000>; /* 256KB */ + read-only; + }; + + partition@820000 { + label = "sysdiag"; + reg = <0x820000 0x1e0000>; /* 1920KB */ + read-only; + }; + + /* kernel1 overlaps with rootfs1 by design */ + partition@a00000 { + label = "kernel1"; + reg = <0xa00000 0x5000000>; /* 80MB */ + }; + + partition@1000000 { + label = "rootfs1"; + reg = <0x1000000 0x4a00000>; /* 74MB */ + }; + + /* kernel2 overlaps with rootfs2 by design */ + partition@5a00000 { + label = "kernel2"; + reg = <0x5a00000 0x5000000>; /* 80MB */ + }; + + partition@6000000 { + label = "rootfs2"; + reg = <0x6000000 0x4a00000>; /* 74MB */ + }; + + /* + * 86MB, last MB is for the BBT, not writable + */ + partition@aa00000 { + label = "syscfg"; + reg = <0xaa00000 0x5600000>; + }; + + /* + * Unused area between "s_env" and "devinfo". + * Moved here because otherwise the renumbered + * partitions would break the bootloader + * supplied bootargs + */ + partition@180000 { + label = "unused_area"; + reg = <0x260000 0x5c0000>; /* 5.75MB */ + }; + }; + }; + + bm-bppi { + status = "okay"; + }; + + pcie-controller { + status = "okay"; + + pcie@1,0 { + /* Marvell 88W8964, 5GHz-only */ + status = "okay"; + + mwlwifi { + marvell,2ghz = <0>; + marvell,chainmask = <4 4>; + }; + + }; + + pcie@2,0 { + /* Marvell 88W8964, 2GHz-only */ + status = "okay"; + + mwlwifi { + marvell,5ghz = <0>; + marvell,chainmask = <4 4>; + }; + + }; + }; + }; + + usb3_phy: usb3_phy { + compatible = "usb-nop-xceiv"; + vcc-supply = <®_xhci0_vbus>; + }; + + reg_xhci0_vbus: xhci0-vbus { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&xhci0_vbus_pins>; + regulator-name = "xhci0-vbus"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + enable-active-high; + gpio = <&gpio1 15 GPIO_ACTIVE_HIGH>; + }; + + gpio_keys { + compatible = "gpio-keys"; + #address-cells = <1>; + #size-cells = <0>; + pinctrl-0 = <&reset_key_pin &wps_key_pin>; + pinctrl-names = "default"; + + button@1 { + label = "WPS"; + linux,code = ; + gpios = <&gpio0 24 GPIO_ACTIVE_LOW>; + }; + + button@2 { + label = "Factory Reset Button"; + linux,code = ; + gpios = <&gpio0 29 GPIO_ACTIVE_LOW>; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + pinctrl-0 = <&power_led_pin &sata_led_pin &wlan_2g_led_pin &wlan_5g_led_pin>; + pinctrl-names = "default"; + + sata { + label = "rango:white:sata"; + gpios = <&gpio0 21 GPIO_ACTIVE_LOW>; + linux,default-trigger = "disk-activity"; + }; + + wlan_2g { + label = "rango:white:wlan_2g"; + gpios = <&gpio1 13 GPIO_ACTIVE_LOW>; + }; + + wlan_5g { + label = "rango:white:wlan_5g"; + gpios = <&gpio1 14 GPIO_ACTIVE_LOW>; + }; + + power { + label = "rango:white:power"; + gpios = <&gpio1 24 GPIO_ACTIVE_HIGH>; + default-state = "on"; + }; + }; + + dsa@0 { + compatible = "marvell,dsa"; + #address-cells = <2>; + #size-cells = <0>; + + dsa,ethernet = <ð2>; + dsa,mii-bus = <&mdio>; + + switch@0 { + #address-cells = <1>; + #size-cells = <0>; + reg = <0x0 0>; /* MDIO address 0, switch 0 in tree */ + + port@0 { + reg = <0>; + label = "lan4"; + }; + + port@1 { + reg = <1>; + label = "lan3"; + }; + + port@2 { + reg = <2>; + label = "lan2"; + }; + + port@3 { + reg = <3>; + label = "lan1"; + }; + + port@4 { + reg = <4>; + label = "wan"; + }; + + port@5 { + reg = <5>; + label = "cpu"; + }; + }; + }; + + mvsw61xx { + #address-cells = <1>; + #size-cells = <0>; + compatible = "marvell,88e6352"; + status = "okay"; + reg = <0x10>; + + mii-bus = <&mdio>; + cpu-port-0 = <5>; + cpu-port-1 = <6>; + }; + +}; + +&pinctrl { + sata_led_pin: sata-led-pin { + marvell,pins = "mpp21"; + marvell,function = "gpio"; + }; + + wps_key_pin: wps-key-pin { + marvell,pins = "mpp24"; + marvell,function = "gpio"; + }; + + reset_key_pin: reset-key-pin { + marvell,pins = "mpp29"; + marvell,function = "gpio"; + }; + + wlan_2g_led_pin: wlan-2g-led-pin { + marvell,pins = "mpp45"; + marvell,function = "gpio"; + }; + + wlan_5g_led_pin: wlan-5g-led-pin { + marvell,pins = "mpp46"; + marvell,function = "gpio"; + }; + + xhci0_vbus_pins: xhci0-vbus-pins { + marvell,pins = "mpp47"; + marvell,function = "gpio"; + }; + + power_led_pin: power-led-pin { + marvell,pins = "mpp56"; + marvell,function = "gpio"; + }; +}; diff --git a/arch/arm/boot/dts/armada-385-linksys-shelby.dts b/arch/arm/boot/dts/armada-385-linksys-shelby.dts new file mode 100644 index 0000000..f8dd193 --- /dev/null +++ b/arch/arm/boot/dts/armada-385-linksys-shelby.dts @@ -0,0 +1,115 @@ +/* + * Device Tree file for the Linksys WRT1900ACS (Shelby) + * + * Copyright (C) 2015 Imre Kaloz + * + * + * This file is dual-licensed: you can use it either under the terms + * of the GPL or the X11 license, at your option. Note that this dual + * licensing only applies to this file, and not this project as a + * whole. + * + * a) This file is licensed under the terms of the GNU General Public + * License version 2. This program is licensed "as is" without + * any warranty of any kind, whether express or implied. + * + * Or, alternatively, + * + * b) Permission is hereby granted, free of charge, to any person + * obtaining a copy of this software and associated documentation + * files (the "Software"), to deal in the Software without + * restriction, including without limitation the rights to use, + * copy, modify, merge, publish, distribute, sublicense, and/or + * sell copies of the Software, and to permit persons to whom the + * Software is furnished to do so, subject to the following + * conditions: + * + * The above copyright notice and this permission notice shall be + * included in all copies or substantial portions of the Software. + * + * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, + * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES + * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND + * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT + * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, + * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING + * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR + * OTHER DEALINGS IN THE SOFTWARE. + */ + +/dts-v1/; +#include "armada-385-linksys.dtsi" + +/ { + model = "Linksys WRT1900ACS"; + compatible = "linksys,shelby", "linksys,armada385", "marvell,armada385", + "marvell,armada380"; + + soc { + internal-regs{ + i2c@11000 { + + pca9635@68 { + #address-cells = <1>; + #size-cells = <0>; + + wan_amber@0 { + label = "shelby:amber:wan"; + reg = <0x0>; + }; + + wan_white@1 { + label = "shelby:white:wan"; + reg = <0x1>; + }; + + wlan_2g@2 { + label = "shelby:white:wlan_2g"; + reg = <0x2>; + }; + + wlan_5g@3 { + label = "shelby:white:wlan_5g"; + reg = <0x3>; + }; + + usb2@5 { + label = "shelby:white:usb2"; + reg = <0x5>; + }; + + usb3_1@6 { + label = "shelby:white:usb3_1"; + reg = <0x6>; + }; + + usb3_2@7 { + label = "shelby:white:usb3_2"; + reg = <0x7>; + }; + + wps_white@8 { + label = "shelby:white:wps"; + reg = <0x8>; + }; + + wps_amber@9 { + label = "shelby:amber:wps"; + reg = <0x9>; + }; + }; + }; + }; + }; + + gpio-leds { + power { + label = "shelby:white:power"; + }; + + sata { + label = "shelby:white:sata"; + linux,default-trigger = "disk-activity"; + }; + }; +}; -- 2.7.4