Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id ; Tue, 27 Feb 2001 06:49:29 -0500 Received: (majordomo@vger.kernel.org) by vger.kernel.org id ; Tue, 27 Feb 2001 06:49:19 -0500 Received: from zikova.cvut.cz ([147.32.235.100]:12039 "EHLO zikova.cvut.cz") by vger.kernel.org with ESMTP id ; Tue, 27 Feb 2001 06:49:13 -0500 From: "Petr Vandrovec" Organization: CC CTU Prague To: "Dmitry B. Tsvetkov" Date: Tue, 27 Feb 2001 12:47:17 MET-1 MIME-Version: 1.0 Content-type: text/plain; charset=US-ASCII Content-transfer-encoding: 7BIT Subject: Re: PROBLEM: frame-buffer doesn't work on HP Vectra with Ma CC: linux-kernel@vger.kernel.org X-mailer: Pegasus Mail v3.40 Message-ID: <9F36E64703@vcnet.vc.cvut.cz> Sender: linux-kernel-owner@vger.kernel.org X-Mailing-List: linux-kernel@vger.kernel.org On 27 Feb 01 at 12:41, Dmitry B. Tsvetkov wrote: > Description: after switching to VGA mode all messages appeared like > dots and lines over HP Bios logo screen, only penguin logo looks > normal (on previous 2.4.0 and 2.4.1 kernels it was shown using wrong > colors or unvisible, but all fonts was shown normally). > > Computers: HP Vectra VE6 series 8, Matrox G100 > HP Vectra VLi 8, Matrox G200 Are you sure you did not enable vesafb + matroxfb or vga16fb + matroxfb together? Boot Linux, and then post contents of /proc/fb to us. If it contains anything else than '0 MATROX VGA', you misconfigured your kernel. Petr Vandrovec vandrove@vc.cvut.cz - To unsubscribe from this list: send the line "unsubscribe linux-kernel" in the body of a message to majordomo@vger.kernel.org More majordomo info at http://vger.kernel.org/majordomo-info.html Please read the FAQ at http://www.tux.org/lkml/