Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753859AbdCFLVb (ORCPT ); Mon, 6 Mar 2017 06:21:31 -0500 Received: from smtprelay.synopsys.com ([198.182.47.9]:45701 "EHLO smtprelay.synopsys.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753593AbdCFLVZ (ORCPT ); Mon, 6 Mar 2017 06:21:25 -0500 From: Ramiro Oliveira To: linux-kernel@vger.kernel.org, linux-media@vger.kernel.org, devicetree@vger.kernel.org Cc: vladimir_zapolskiy@mentor.com, CARLOS.PALMINHA@synopsys.com, Ramiro Oliveira , Andrew Morton , Arnd Bergmann , "David S. Miller" , Geert Uytterhoeven , Greg Kroah-Hartman , Guenter Roeck , Hans Verkuil , Mark Rutland , Mauro Carvalho Chehab , Pavel Machek , Robert Jarzmik , Rob Herring , Sakari Ailus , Steve Longerbeam Subject: [PATCH v10 1/2] Documentation: DT: Add OV5647 bindings Date: Mon, 6 Mar 2017 11:16:33 +0000 Message-Id: X-Mailer: git-send-email 2.11.0 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1464 Lines: 52 Create device tree bindings documentation. Signed-off-by: Ramiro Oliveira --- .../devicetree/bindings/media/i2c/ov5647.txt | 35 ++++++++++++++++++++++ 1 file changed, 35 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5647.txt diff --git a/Documentation/devicetree/bindings/media/i2c/ov5647.txt b/Documentation/devicetree/bindings/media/i2c/ov5647.txt new file mode 100644 index 000000000000..22e44945b661 --- /dev/null +++ b/Documentation/devicetree/bindings/media/i2c/ov5647.txt @@ -0,0 +1,35 @@ +Omnivision OV5647 raw image sensor +--------------------------------- + +OV5647 is a raw image sensor with MIPI CSI-2 and CCP2 image data interfaces +and CCI (I2C compatible) control bus. + +Required properties: + +- compatible : "ovti,ov5647". +- reg : I2C slave address of the sensor. +- clocks : Reference to the xclk clock. + +The common video interfaces bindings (see video-interfaces.txt) should be +used to specify link to the image data receiver. The OV5647 device +node should contain one 'port' child node with an 'endpoint' subnode. + +Endpoint node mandatory properties: + +- remote-endpoint: A phandle to the bus receiver's endpoint node. + +Example: + + i2c@2000 { + ... + ov: camera@36 { + compatible = "ovti,ov5647"; + reg = <0x36>; + clocks = <&camera_clk>; + port { + camera_1: endpoint { + remote-endpoint = <&csi1_ep1>; + }; + }; + }; + }; -- 2.11.0