Subject: Re: [PATCH v2 1/7] PCI: dwc: designware: Add new *ops* for cpu addr
 fixup
To: Kishon Vijay Abraham I <kishon@ti.com>,
        Bjorn Helgaas <bhelgaas@google.com>,
        Joao Pinto <Joao.Pinto@synopsys.com>, <linux-pci@vger.kernel.org>,
        <linux-kernel@vger.kernel.org>, <linux-omap@vger.kernel.org>,
        <linux-arm-kernel@lists.infradead.org>,
        <linux-samsung-soc@vger.kernel.org>, <linux-arm-kernel@axis.com>
References: <1488880372-7390-1-git-send-email-kishon@ti.com>
 <1488880372-7390-2-git-send-email-kishon@ti.com>
CC: <nsekhar@ti.com>
From: Joao Pinto <Joao.Pinto@synopsys.com>
Message-ID: <2372241a-759c-e521-6d65-5a762ab159c4@synopsys.com>
Date: Tue, 7 Mar 2017 11:11:38 +0000
User-Agent: Mozilla/5.0 (Windows NT 10.0; WOW64; rv:45.0) Gecko/20100101
 Thunderbird/45.7.1
MIME-Version: 1.0
In-Reply-To: <1488880372-7390-2-git-send-email-kishon@ti.com>
Content-Type: text/plain; charset="windows-1252"
Content-Transfer-Encoding: 8bit
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 1911
Lines: 48

?s 9:52 AM de 3/7/2017, Kishon Vijay Abraham I escreveu:
> Some platforms (like dra7xx) require only the least 28 bits of the
> corresponding 32 bit CPU address to be programmed in the address
> translation unit. This modified address is stored in io_base/mem_base/
> cfg0_base/cfg1_base in dra7xx_pcie_host_init. While this is okay for
> host mode where the address range is fixed, device mode requires
> different addresses to be programmed based on the host buffer address.
> Add a new ops to get the least 28 bits of the corresponding 32 bit
> CPU address and invoke it before programming the address translation
> unit.
> 
> Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
> ---
>  drivers/pci/dwc/pcie-designware.c |    3 +++
>  drivers/pci/dwc/pcie-designware.h |    1 +
>  2 files changed, 4 insertions(+)
> 
> diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
> index 7e1fb7d..14ee7a3 100644
> --- a/drivers/pci/dwc/pcie-designware.c
> +++ b/drivers/pci/dwc/pcie-designware.c
> @@ -97,6 +97,9 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
>  {
>  	u32 retries, val;
>  
> +	if (pp->ops->cpu_addr_fixup)
> +		cpu_addr = pp->ops->cpu_addr_fixup(cpu_addr);
> +
>  	if (pci->iatu_unroll_enabled) {
>  		dw_pcie_writel_unroll(pci, index, PCIE_ATU_UNR_LOWER_BASE,
>  				      lower_32_bits(cpu_addr));
> diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
> index cd3b871..8f3dcb2 100644
> --- a/drivers/pci/dwc/pcie-designware.h
> +++ b/drivers/pci/dwc/pcie-designware.h
> @@ -143,6 +143,7 @@ struct pcie_port {
>  };
>  
>  struct dw_pcie_ops {
> +	u64	(*cpu_addr_fixup)(u64 cpu_addr);
>  	u32	(*readl_dbi)(struct dw_pcie *pcie, u32 reg);
>  	void	(*writel_dbi)(struct dw_pcie *pcie, u32 reg, u32 val);
>  	int	(*link_up)(struct dw_pcie *pcie);
> 

Looks good.

Acked-by: Joao Pinto <jpinto@synopsys.com>