From: "J.C. Wren" <jcwren@jcwren.com>
Reply-To: jcwren@jcwren.com
To: linux-kernel@vger.kernel.org
Subject: Machin dependent serial port patches
Date: Mon, 19 May 2003 20:56:00 -0400
User-Agent: KMail/1.5.1
MIME-Version: 1.0
Content-Type: text/plain;
  charset="us-ascii"
Content-Transfer-Encoding: 7bit
Content-Disposition: inline
Message-Id: <200305192056.00610.jcwren@jcwren.com>
Sender: linux-kernel-owner@vger.kernel.org
Content-Length: 727
Lines: 14

	One of the things I noticed in the port of 2.5.69 to the 386EX embedded 
system is that serial.h appears to not be a mach-xxx positionable file.  The 
386EX board uses standard 8250 type serial ports, but at 3.6864Mhz instad of 
1.8432Mhz.  There appears to be no way to build a patch set without modifying 
include/i386/serial.h.  Would this not be better places in mach-defaults?  
I'm trying very hard to modify as few files as possible when building these 
patch sets.

	--John
-
To unsubscribe from this list: send the line "unsubscribe linux-kernel" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html
Please read the FAQ at  http://www.tux.org/lkml/