Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755096AbdCJEy0 (ORCPT ); Thu, 9 Mar 2017 23:54:26 -0500 Received: from mail-pg0-f65.google.com ([74.125.83.65]:32871 "EHLO mail-pg0-f65.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1755069AbdCJEyV (ORCPT ); Thu, 9 Mar 2017 23:54:21 -0500 From: Steve Longerbeam X-Google-Original-From: Steve Longerbeam To: robh+dt@kernel.org, mark.rutland@arm.com, shawnguo@kernel.org, kernel@pengutronix.de, fabio.estevam@nxp.com, linux@armlinux.org.uk, mchehab@kernel.org, hverkuil@xs4all.nl, nick@shmanahar.org, markus.heiser@darmarIT.de, p.zabel@pengutronix.de, laurent.pinchart+renesas@ideasonboard.com, bparrot@ti.com, geert@linux-m68k.org, arnd@arndb.de, sudipm.mukherjee@gmail.com, minghsiu.tsai@mediatek.com, tiffany.lin@mediatek.com, jean-christophe.trotin@st.com, horms+renesas@verge.net.au, niklas.soderlund+renesas@ragnatech.se, robert.jarzmik@free.fr, songjun.wu@microchip.com, andrew-ct.chen@mediatek.com, gregkh@linuxfoundation.org, shuah@kernel.org, sakari.ailus@linux.intel.com, pavel@ucw.cz Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-media@vger.kernel.org, devel@driverdev.osuosl.org, Steve Longerbeam Subject: [PATCH v5 13/39] ARM: dts: imx6-sabreauto: add the ADV7180 video decoder Date: Thu, 9 Mar 2017 20:52:53 -0800 Message-Id: <1489121599-23206-14-git-send-email-steve_longerbeam@mentor.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1489121599-23206-1-git-send-email-steve_longerbeam@mentor.com> References: <1489121599-23206-1-git-send-email-steve_longerbeam@mentor.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2774 Lines: 95 Enables the ADV7180 decoder sensor. The ADV7180 connects to the parallel-bus mux input on ipu1_csi0_mux. The ADV7180 power pin is via max7310_b port expander. Signed-off-by: Steve Longerbeam --- arch/arm/boot/dts/imx6qdl-sabreauto.dtsi | 58 ++++++++++++++++++++++++++++++++ 1 file changed, 58 insertions(+) diff --git a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi index 1212f82..a712ff1 100644 --- a/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi +++ b/arch/arm/boot/dts/imx6qdl-sabreauto.dtsi @@ -124,6 +124,21 @@ #size-cells = <0>; reg = <1>; + adv7180: camera@21 { + compatible = "adi,adv7180"; + reg = <0x21>; + powerdown-gpios = <&max7310_b 2 GPIO_ACTIVE_LOW>; + interrupt-parent = <&gpio1>; + interrupts = <27 0x8>; + + port { + adv7180_to_ipu1_csi0_mux: endpoint { + remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>; + bus-width = <8>; + }; + }; + }; + max7310_a: gpio@30 { compatible = "maxim,max7310"; reg = <0x30>; @@ -151,6 +166,25 @@ }; }; +&ipu1_csi0_from_ipu1_csi0_mux { + bus-width = <8>; +}; + +&ipu1_csi0_mux_from_parallel_sensor { + remote-endpoint = <&adv7180_to_ipu1_csi0_mux>; + bus-width = <8>; +}; + +&ipu1_csi0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ipu1_csi0>; + + /* enable frame interval monitor on this port */ + fim { + status = "okay"; + }; +}; + &clks { assigned-clocks = <&clks IMX6QDL_PLL4_BYPASS_SRC>, <&clks IMX6QDL_PLL4_BYPASS>, @@ -444,6 +478,30 @@ >; }; + pinctrl_ipu1_csi0: ipu1csi0grp { + fsl,pins = < + MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x1b0b0 + MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x1b0b0 + MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x1b0b0 + MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x1b0b0 + MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x1b0b0 + MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x1b0b0 + MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x1b0b0 + MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x1b0b0 + MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0 + MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0 + MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0 + MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0 + MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0 + MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0 + MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0 + MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0 + MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0 + MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0 + MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0 + >; + }; + pinctrl_max7310: max7310grp { fsl,pins = < MX6QDL_PAD_SD2_DAT0__GPIO1_IO15 0x1b0b0 -- 2.7.4