Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1752607AbdCNOVd (ORCPT ); Tue, 14 Mar 2017 10:21:33 -0400 Received: from mail-wr0-f195.google.com ([209.85.128.195]:32821 "EHLO mail-wr0-f195.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752490AbdCNOV2 (ORCPT ); Tue, 14 Mar 2017 10:21:28 -0400 From: Corentin Labbe To: robh+dt@kernel.org, mark.rutland@arm.com, maxime.ripard@free-electrons.com, wens@csie.org, linux@armlinux.org.uk, catalin.marinas@arm.com, will.deacon@arm.com, peppe.cavallaro@st.com, alexandre.torgue@st.com, davem@davemloft.net Cc: f.fainelli@gmail.com, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, netdev@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Corentin Labbe Subject: [PATCH v2 12/20] ARM: dts: sun8i: Enable dwmac-sun8i on the Orange Pi plus Date: Tue, 14 Mar 2017 15:18:48 +0100 Message-Id: <20170314141856.24560-13-clabbe.montjoie@gmail.com> X-Mailer: git-send-email 2.10.2 In-Reply-To: <20170314141856.24560-1-clabbe.montjoie@gmail.com> References: <20170314141856.24560-1-clabbe.montjoie@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1574 Lines: 67 The dwmac-sun8i hardware is present on the Orange PI plus. It uses an external PHY rtl8211e via RGMII. This patch create the needed regulator, emac and phy nodes. Signed-off-by: Corentin Labbe --- arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts | 35 ++++++++++++++++++++++++++++ 1 file changed, 35 insertions(+) diff --git a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts index 8c40ab7..4e075a2 100644 --- a/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts +++ b/arch/arm/boot/dts/sun8i-h3-orangepi-plus.dts @@ -58,6 +58,18 @@ enable-active-high; gpio = <&pio 6 11 GPIO_ACTIVE_HIGH>; }; + + reg_gmac_3v3: gmac-3v3 { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&gmac_power_pin_orangepi>; + regulator-name = "gmac-3v3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + startup-delay-us = <100000>; + enable-active-high; + gpio = <&pio 3 6 GPIO_ACTIVE_HIGH>; + }; }; &ehci3 { @@ -86,8 +98,31 @@ pins = "PG11"; function = "gpio_out"; }; + + gmac_power_pin_orangepi: gmac_power_pin@0 { + pins = "PD6"; + function = "gpio_out"; + drive-strength = <10>; + }; }; &usbphy { usb3_vbus-supply = <®_usb3_vbus>; }; + +&mdio { + ext_rgmii_phy: ethernet-phy@1 { + reg = <0>; + }; +}; + +&emac { + pinctrl-names = "default"; + pinctrl-0 = <&emac_rgmii_pins>; + phy-supply = <®_gmac_3v3>; + phy-handle = <&ext_rgmii_phy>; + phy-mode = "rgmii"; + + allwinner,leds-active-low; + status = "okay"; +}; -- 2.10.2