Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751437AbdCQECO (ORCPT ); Fri, 17 Mar 2017 00:02:14 -0400 Received: from mail-pg0-f67.google.com ([74.125.83.67]:35385 "EHLO mail-pg0-f67.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751011AbdCQECL (ORCPT ); Fri, 17 Mar 2017 00:02:11 -0400 From: Chris Zhong To: linux-rockchip@lists.infradead.org Cc: Chris Zhong , Mark Yao , David Airlie , Heiko Stuebner , dri-devel@lists.freedesktop.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Subject: [PATCH v3 3/4] drm/rockchip/dsi: enable the grf clk before writing grf registers Date: Fri, 17 Mar 2017 11:54:23 +0800 Message-Id: <1489722865-22122-4-git-send-email-zyw@rock-chips.com> X-Mailer: git-send-email 2.6.3 In-Reply-To: <1489722865-22122-1-git-send-email-zyw@rock-chips.com> References: <1489722865-22122-1-git-send-email-zyw@rock-chips.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2720 Lines: 89 For RK3399, the grf clk should be enabled before writing grf registers, otherwise the register value can not be changed. Signed-off-by: Chris Zhong --- Changes in v3: - add a DW_MIPI_NEEDS_GRF_CLK for RK3399 Changes in v2: - check the grf_clk only for RK3399 drivers/gpu/drm/rockchip/dw-mipi-dsi.c | 26 +++++++++++++++++++++++++- 1 file changed, 25 insertions(+), 1 deletion(-) diff --git a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c index 68f48b0..5a18281 100644 --- a/drivers/gpu/drm/rockchip/dw-mipi-dsi.c +++ b/drivers/gpu/drm/rockchip/dw-mipi-dsi.c @@ -252,6 +252,7 @@ #define THS_ZERO_PROGRAM_EN BIT(6) #define DW_MIPI_NEEDS_PHY_CFG_CLK BIT(0) +#define DW_MIPI_NEEDS_GRF_CLK BIT(1) enum { BANDGAP_97_07, @@ -294,6 +295,7 @@ struct dw_mipi_dsi { struct regmap *grf_regmap; void __iomem *base; + struct clk *grf_clk; struct clk *pllref_clk; struct clk *pclk; struct clk *phy_cfg_clk; @@ -982,6 +984,17 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder) dw_mipi_dsi_dphy_interface_config(dsi); dw_mipi_dsi_clear_err(dsi); + /* + * For the RK3399, the clk of grf must be enabled before writing grf + * register. And for RK3288 or other soc, this grf_clk must be NULL, + * the clk_prepare_enable return true directly. + */ + ret = clk_prepare_enable(dsi->grf_clk); + if (ret) { + dev_err(dsi->dev, "Failed to enable grf_clk\n"); + return; + } + if (pdata->grf_dsi0_mode_reg) regmap_write(dsi->grf_regmap, pdata->grf_dsi0_mode_reg, pdata->grf_dsi0_mode); @@ -1006,6 +1019,8 @@ static void dw_mipi_dsi_encoder_enable(struct drm_encoder *encoder) regmap_write(dsi->grf_regmap, pdata->grf_switch_reg, val); dev_dbg(dsi->dev, "vop %s output to dsi0\n", (mux) ? "LIT" : "BIG"); dsi->dpms_mode = DRM_MODE_DPMS_ON; + + clk_disable_unprepare(dsi->grf_clk); } static int @@ -1139,7 +1154,7 @@ static struct dw_mipi_dsi_plat_data rk3399_mipi_dsi_drv_data = { .grf_switch_reg = RK3399_GRF_SOC_CON19, .grf_dsi0_mode = RK3399_GRF_DSI_MODE, .grf_dsi0_mode_reg = RK3399_GRF_SOC_CON22, - .flags = DW_MIPI_NEEDS_PHY_CFG_CLK, + .flags = DW_MIPI_NEEDS_PHY_CFG_CLK | DW_MIPI_NEEDS_GRF_CLK, .max_data_lanes = 4, }; @@ -1240,6 +1255,15 @@ static int dw_mipi_dsi_bind(struct device *dev, struct device *master, } } + if (pdata->flags & DW_MIPI_NEEDS_GRF_CLK) { + dsi->grf_clk = devm_clk_get(dev, "grf"); + if (IS_ERR(dsi->grf_clk)) { + ret = PTR_ERR(dsi->grf_clk); + dev_err(dev, "Unable to get grf_clk: %d\n", ret); + return ret; + } + } + ret = clk_prepare_enable(dsi->pllref_clk); if (ret) { dev_err(dev, "%s: Failed to enable pllref_clk\n", __func__); -- 2.6.3