Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1751680AbdCQKAk (ORCPT ); Fri, 17 Mar 2017 06:00:40 -0400 Received: from mail-wr0-f193.google.com ([209.85.128.193]:36515 "EHLO mail-wr0-f193.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1751275AbdCQJ7Y (ORCPT ); Fri, 17 Mar 2017 05:59:24 -0400 From: "M'boumba Cedric Madianga" To: wsa@the-dreams.de, robh+dt@kernel.org, mcoquelin.stm32@gmail.com, alexandre.torgue@st.com, linus.walleij@linaro.org, pierre-yves.mordret@st.com, linux@armlinux.org.uk, linux-i2c@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org Cc: "M'boumba Cedric Madianga" Subject: [PATCH 1/5] dt-bindings: i2c-stm32: Document the STM32F7 I2C bindings Date: Fri, 17 Mar 2017 10:58:54 +0100 Message-Id: <1489744738-21632-2-git-send-email-cedric.madianga@gmail.com> X-Mailer: git-send-email 1.9.1 In-Reply-To: <1489744738-21632-1-git-send-email-cedric.madianga@gmail.com> References: <1489744738-21632-1-git-send-email-cedric.madianga@gmail.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2080 Lines: 49 This patch adds the documentation of device tree bindings for STM32F7 I2C Signed-off-by: M'boumba Cedric Madianga --- .../devicetree/bindings/i2c/i2c-stm32.txt | 22 +++++++++++++++++++--- 1 file changed, 19 insertions(+), 3 deletions(-) diff --git a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt index 78eaf7b..8288724 100644 --- a/Documentation/devicetree/bindings/i2c/i2c-stm32.txt +++ b/Documentation/devicetree/bindings/i2c/i2c-stm32.txt @@ -1,7 +1,9 @@ * I2C controller embedded in STMicroelectronics STM32 I2C platform Required properties : -- compatible : Must be "st,stm32f4-i2c" +- compatible : Must be one of the following + - "st,stm32f4-i2c" + - "st,stm32f7-i2c" - reg : Offset and length of the register set for the device - interrupts : Must contain the interrupt id for I2C event and then the interrupt id for I2C error. @@ -14,8 +16,22 @@ Required properties : Optional properties : - clock-frequency : Desired I2C bus clock frequency in Hz. If not specified, - the default 100 kHz frequency will be used. As only Normal and Fast modes - are supported, possible values are 100000 and 400000. + the default 100 kHz frequency will be used. + For STM32F4 SoC Standard-mode and Fast-mode are supported, possible values are + 100000 and 400000. + For STM32F7 SoC, Standard-mode, Fast-mode and Fast-mode Plus are supported, + possible values are 100000, 400000 and 1000000. +- st,i2c-timing : A 32-bit I2C timing refister value. + This value is only required for "st,stm32f7-i2c". + A specific external tool delivered by ST is used to compute the value to be + set here according to i2C speed frequency, i2c clock source frequency, + i2c rise time and i2c fall time inputs. + - bit 31:28: PRESC[3:0]: Timing prescaler + - bit 27:24: Reserved + - bit 23:20: SCLDEL[3:0]: Data setup time + - bit 19:16: SDADEL[3:0]: Data hold time + - bit 15:8: SCLH[7:0]: SCL high period + - bit 7:0: SCLL[7:0]: SCL low period Example : -- 1.9.1