Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933987AbdCUS3l (ORCPT ); Tue, 21 Mar 2017 14:29:41 -0400 Received: from mail.free-electrons.com ([62.4.15.54]:40480 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933748AbdCUS3S (ORCPT ); Tue, 21 Mar 2017 14:29:18 -0400 From: Gregory CLEMENT To: Linus Walleij , linux-gpio@vger.kernel.org Cc: Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Gregory CLEMENT , Thomas Petazzoni , linux-arm-kernel@lists.infradead.org, Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Nadav Haklai , Victor Gu , Marcin Wojtas , Wilson Ding , Hua Jing , Neta Zur Hershkovits Subject: [PATCH v2 1/7] pinctrl: dt-bindings: Add documentation for Armada 37xx pin controllers Date: Tue, 21 Mar 2017 19:28:30 +0100 Message-Id: <2dc869315a1b6bcc6d7eedd67b9ea8c0483b9789.1490120798.git-series.gregory.clement@free-electrons.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 4822 Lines: 189 Document the device tree binding for the pin controllers found on the Armada 37xx SoCs. Update the binding documention of the xtal clk which is a subnode of this syscon node. Signed-off-by: Gregory CLEMENT --- Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt | 7 ++-- Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt | 143 ++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++- 2 files changed, 147 insertions(+), 3 deletions(-) create mode 100644 Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt diff --git a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt index a88f1f05fbd6..4c0807f28cfa 100644 --- a/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt +++ b/Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt @@ -5,6 +5,7 @@ reading the gpio latch register. This node must be a subnode of the node exposing the register address of the GPIO block where the gpio latch is located. +See Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt Required properties: - compatible : shall be one of the following: @@ -16,9 +17,9 @@ Optional properties: output names ("xtal") Example: -gpio1: gpio@13800 { - compatible = "marvell,armada-3700-gpio", "syscon", "simple-mfd"; - reg = <0x13800 0x1000>; +pinctrl_nb: pinctrl-nb@13800 { + compatible = "armada3710-nb-pinctrl", "syscon", "simple-mfd"; + reg = <0x13800 0x100>, <0x13C00 0x20>; xtalclk: xtal-clk { compatible = "marvell,armada-3700-xtal-clock"; diff --git a/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt new file mode 100644 index 000000000000..9eabb42fbd53 --- /dev/null +++ b/Documentation/devicetree/bindings/pinctrl/marvell,armada-37xx-pinctrl.txt @@ -0,0 +1,143 @@ +* Marvell Armada 37xx SoC pin and gpio controller + +Each Armada 37xx SoC come with two pin and gpio controller one for the +south bridge and the other for the north bridge. + +Inside this set of register the gpio latch allows exposing some +configuration of the SoC and especially the clock frequency of the +xtal. Hence, this node is a represent as syscon allowing sharing the +register between multiple hardware block. + +GPIO and pin controller: +------------------------ + +Refer to pinctrl-bindings.txt in this directory for details of the +common pinctrl bindings used by client devices, including the meaning +of the phrase "pin configuration node". + +Required properties for pinctrl driver: + +- compatible: "marvell,armada3710-sb-pinctrl", "syscon, "simple-mfd" + for the south bridge + "marvell,armada3710-nb-pinctrl", "syscon, "simple-mfd" + for the north bridge +- reg: The first set of register are for pinctrl/gpio and the second + set for the interrupt controller +- interrupts: list of the interrupt use by the gpio + +Available groups and functions for the North bridge: + +group: jtag + - pins 20-24 + - functions jtag, gpio + +group sdio0 + - pins 8-10 + - functions sdio, gpio + +group emmc_nb + - pins 27-35 + - functions emmc, gpio + +group pwm0 + - pin 11 (GPIO1-11) + - functions pwm, gpio + +group pwm1 + - pin 12 + - functions pwm, gpio + +group pwm2 + - pin 13 + - functions pwm, gpio + +group pwm3 + - pin 14 + - functions pwm, gpio + +group pmic1 + - pin 17 + - functions pmic, gpio + +group pmic0 + - pin 16 + - functions pmic, gpio + +group i2c2 + - pins 2-3 + - functions i2c, gpio + +group i2c1 + - pins 0-1 + - functions i2c, gpio + +group spi_cs1 + - pin 17 + - functions spi, gpio + +group spi_cs2 + - pin 18 + - functions spi, gpio + +group spi_cs3 + - pin 19 + - functions spi, gpio + +group onewire + - pin 4 + - functions onewire, gpio + +group uart1 + - pins 25-26 + - functions uart, gpio + +group spi_quad + - pins 15-16 + - functions spi, gpio + +group uart_2 + - pins 9-10 + - functions uart, gpio + +Available groups and functions for the South bridge: + +group usb32_drvvbus0 + - pin 36 + - functions drvbus, gpio + +group usb2_drvvbus1 + - pin 37 + - functions drvbus, gpio + +group sdio_sb + - pins 60-64 + - functions sdio, gpio + +group rgmii + - pins 42-55 + - functions mii, gpio + +group pcie1 + - pins 39-40 + - functions pcie, gpio + +group ptp + - pins 56-58 + - functions ptp, gpio + +group ptp_clk + - pin 57 + - functions ptp, mii + +group ptp_trig + - pin 58 + - functions ptp, mii + +group mii_col + - pin 59 + - functions mii, mii_err + +Xtal Clock bindings for Marvell Armada 37xx SoCs +------------------------------------------------ + +see Documentation/devicetree/bindings/clock/armada3700-xtal-clock.txt -- git-series 0.9.1