Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S934999AbdCVRVz (ORCPT ); Wed, 22 Mar 2017 13:21:55 -0400 Received: from andre.telenet-ops.be ([195.130.132.53]:36886 "EHLO andre.telenet-ops.be" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S934824AbdCVRVq (ORCPT ); Wed, 22 Mar 2017 13:21:46 -0400 From: Geert Uytterhoeven To: Thierry Reding , Lee Jones , Daniel Thompson , Jingoo Han , Bartlomiej Zolnierkiewicz Cc: Peter Ujfalusi , Philipp Zabel , linux-pwm@vger.kernel.org, linux-fbdev@vger.kernel.org, linux-renesas-soc@vger.kernel.org, linux-kernel@vger.kernel.org, Geert Uytterhoeven Subject: [PATCH] backlight: pwm_bl: Fix GPIO out for unimplemented .get_direction() Date: Wed, 22 Mar 2017 18:21:25 +0100 Message-Id: <1490203285-28324-1-git-send-email-geert+renesas@glider.be> X-Mailer: git-send-email 2.7.4 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1907 Lines: 44 Commit 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial power state to a separate function") not just moved some code, but made slight changes in semantics. If a gpiochip doesn't implement the optional .get_direction() callback, gpiod_get_direction always returns -EINVAL, which is never equal to GPIOF_DIR_IN, leading to the GPIO not being configured for output. To avoid this, invert the test and check for not GPIOF_DIR_OUT instead, like the original code did. This restores the display on r8a7740/armadillo. Fixes: 7613c922315e308a ("backlight: pwm_bl: Move the checks for initial power state to a separate function") Signed-off-by: Geert Uytterhoeven --- drivers/video/backlight/pwm_bl.c | 7 ++++--- 1 file changed, 4 insertions(+), 3 deletions(-) diff --git a/drivers/video/backlight/pwm_bl.c b/drivers/video/backlight/pwm_bl.c index d7efcb632f7d9dde..002f1ce22bd02032 100644 --- a/drivers/video/backlight/pwm_bl.c +++ b/drivers/video/backlight/pwm_bl.c @@ -297,14 +297,15 @@ static int pwm_backlight_probe(struct platform_device *pdev) } /* - * If the GPIO is configured as input, change the direction to output - * and set the GPIO as active. + * If the GPIO is not known to be already configured as output, that + * is, if gpiod_get_direction returns either GPIOF_DIR_IN or -EINVAL, + * change the direction to output and set the GPIO as active. * Do not force the GPIO to active when it was already output as it * could cause backlight flickering or we would enable the backlight too * early. Leave the decision of the initial backlight state for later. */ if (pb->enable_gpio && - gpiod_get_direction(pb->enable_gpio) == GPIOF_DIR_IN) + gpiod_get_direction(pb->enable_gpio) != GPIOF_DIR_OUT) gpiod_direction_output(pb->enable_gpio, 1); pb->power_supply = devm_regulator_get(&pdev->dev, "power"); -- 2.7.4