Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1756310AbdCWPT3 (ORCPT ); Thu, 23 Mar 2017 11:19:29 -0400 Received: from mail.free-electrons.com ([62.4.15.54]:43396 "EHLO mail.free-electrons.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1756110AbdCWPTX (ORCPT ); Thu, 23 Mar 2017 11:19:23 -0400 From: Gregory CLEMENT To: Linus Walleij , linux-gpio@vger.kernel.org Cc: Jason Cooper , Andrew Lunn , Sebastian Hesselbarth , Gregory CLEMENT , Thomas Petazzoni , linux-arm-kernel@lists.infradead.org, Rob Herring , devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Nadav Haklai , Victor Gu , Marcin Wojtas , Wilson Ding , Hua Jing , Neta Zur Hershkovits Subject: [PATCH v3 6/7] ARM64: dts: marvell: Add pinctrl nodes for Armada 3700 Date: Thu, 23 Mar 2017 16:19:06 +0100 Message-Id: <7bdf0804023c84af14bb7c00268635767ef59f69.1490282185.git-series.gregory.clement@free-electrons.com> X-Mailer: git-send-email 2.11.0 In-Reply-To: References: In-Reply-To: References: Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2385 Lines: 74 Add the nodes for the two pin controller present in the Armada 37xx SoCs. Initially the node was named gpio1 using the same name that for the register range in the datasheet. However renaming it pinctr_nb (nb for North Bridge) makes more sens. Signed-off-by: Gregory CLEMENT --- arch/arm64/boot/dts/marvell/armada-37xx.dtsi | 42 +++++++++++++++++++-- 1 file changed, 39 insertions(+), 3 deletions(-) diff --git a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi index b48d668a6ab6..c02b13479458 100644 --- a/arch/arm64/boot/dts/marvell/armada-37xx.dtsi +++ b/arch/arm64/boot/dts/marvell/armada-37xx.dtsi @@ -157,10 +157,29 @@ #clock-cells = <1>; }; - gpio1: gpio@13800 { - compatible = "marvell,mvebu-gpio-3700", + pinctrl_nb: pinctrl-nb@13800 { + compatible = "marvell,armada3710-nb-pinctrl", "syscon", "simple-mfd"; - reg = <0x13800 0x500>; + reg = <0x13800 0x100>, <0x13C00 0x20>; + gpionb: gpionb { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_nb 0 0 36>; + gpio-controller; + interrupts = + , + , + , + , + , + , + , + , + , + , + , + ; + + }; xtalclk: xtal-clk { compatible = "marvell,armada-3700-xtal-clock"; @@ -169,6 +188,23 @@ }; }; + pinctrl_sb: pinctrl-sb@18800 { + compatible = "marvell,armada3710-sb-pinctrl", + "syscon", "simple-mfd"; + reg = <0x18800 0x100>, <0x18C00 0x20>; + gpiosb: gpiosb { + #gpio-cells = <2>; + gpio-ranges = <&pinctrl_sb 0 0 29>; + gpio-controller; + interrupts = + , + , + , + , + ; + }; + }; + eth0: ethernet@30000 { compatible = "marvell,armada-3700-neta"; reg = <0x30000 0x4000>; -- git-series 0.9.1