Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1753439AbdC1Mf0 (ORCPT ); Tue, 28 Mar 2017 08:35:26 -0400 Received: from mail.linuxfoundation.org ([140.211.169.12]:59154 "EHLO mail.linuxfoundation.org" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1752627AbdC1MfW (ORCPT ); Tue, 28 Mar 2017 08:35:22 -0400 From: Greg Kroah-Hartman To: linux-kernel@vger.kernel.org, stable@vger.kernel.org Cc: Greg Kroah-Hartman , Gabriel Krisman Bertazi , Sasha Levin , Sumit Semwal Subject: [PATCH 4.4 74/76] serial: 8250_pci: Detach low-level driver during PCI error recovery Date: Tue, 28 Mar 2017 14:31:11 +0200 Message-Id: <20170328122602.961021667@linuxfoundation.org> X-Mailer: git-send-email 2.12.1 In-Reply-To: <20170328122559.966310440@linuxfoundation.org> References: <20170328122559.966310440@linuxfoundation.org> User-Agent: quilt/0.65 MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 3395 Lines: 110 4.4-stable review patch. If anyone has any objections, please let me know. ------------------ From: Sumit Semwal From: Gabriel Krisman Bertazi [ Upstream commit f209fa03fc9d131b3108c2e4936181eabab87416 ] During a PCI error recovery, like the ones provoked by EEH in the ppc64 platform, all IO to the device must be blocked while the recovery is completed. Current 8250_pci implementation only suspends the port instead of detaching it, which doesn't prevent incoming accesses like TIOCMGET and TIOCMSET calls from reaching the device. Those end up racing with the EEH recovery, crashing it. Similar races were also observed when opening the device and when shutting it down during recovery. This patch implements a more robust IO blockage for the 8250_pci recovery by unregistering the port at the beginning of the procedure and re-adding it afterwards. Since the port is detached from the uart layer, we can be sure that no request will make through to the device during recovery. This is similar to the solution used by the JSM serial driver. I thank Peter Hurley for valuable input on this one over one year ago. Signed-off-by: Gabriel Krisman Bertazi Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sasha Levin Signed-off-by: Greg Kroah-Hartman Signed-off-by: Sumit Semwal Signed-off-by: Greg Kroah-Hartman --- drivers/tty/serial/8250/8250_pci.c | 23 +++++++++++++++++++---- 1 file changed, 19 insertions(+), 4 deletions(-) --- a/drivers/tty/serial/8250/8250_pci.c +++ b/drivers/tty/serial/8250/8250_pci.c @@ -57,6 +57,7 @@ struct serial_private { unsigned int nr; void __iomem *remapped_bar[PCI_NUM_BAR_RESOURCES]; struct pci_serial_quirk *quirk; + const struct pciserial_board *board; int line[0]; }; @@ -4058,6 +4059,7 @@ pciserial_init_ports(struct pci_dev *dev } } priv->nr = i; + priv->board = board; return priv; err_deinit: @@ -4068,7 +4070,7 @@ err_out: } EXPORT_SYMBOL_GPL(pciserial_init_ports); -void pciserial_remove_ports(struct serial_private *priv) +void pciserial_detach_ports(struct serial_private *priv) { struct pci_serial_quirk *quirk; int i; @@ -4088,7 +4090,11 @@ void pciserial_remove_ports(struct seria quirk = find_quirk(priv->dev); if (quirk->exit) quirk->exit(priv->dev); +} +void pciserial_remove_ports(struct serial_private *priv) +{ + pciserial_detach_ports(priv); kfree(priv); } EXPORT_SYMBOL_GPL(pciserial_remove_ports); @@ -5819,7 +5825,7 @@ static pci_ers_result_t serial8250_io_er return PCI_ERS_RESULT_DISCONNECT; if (priv) - pciserial_suspend_ports(priv); + pciserial_detach_ports(priv); pci_disable_device(dev); @@ -5844,9 +5850,18 @@ static pci_ers_result_t serial8250_io_sl static void serial8250_io_resume(struct pci_dev *dev) { struct serial_private *priv = pci_get_drvdata(dev); + const struct pciserial_board *board; - if (priv) - pciserial_resume_ports(priv); + if (!priv) + return; + + board = priv->board; + kfree(priv); + priv = pciserial_init_ports(dev, board); + + if (!IS_ERR(priv)) { + pci_set_drvdata(dev, priv); + } } static const struct pci_error_handlers serial8250_err_handler = {