Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932509AbdC2TrN (ORCPT ); Wed, 29 Mar 2017 15:47:13 -0400 Received: from hermes.aosc.io ([172.82.152.187]:45225 "EHLO hermes.aosc.io" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753613AbdC2TrM (ORCPT ); Wed, 29 Mar 2017 15:47:12 -0400 From: Icenowy Zheng To: Rob Herring , Maxime Ripard , Chen-Yu Tsai , Jernej Skrabec Cc: linux-clk@vger.kernel.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org, linux-kernel@vger.kernel.org, dri-devel@lists.freedesktop.org, linux-sunxi@googlegroups.com, Icenowy Zheng Subject: [PATCH v3 01/11] dt-bindings: add binding for the Allwinner DE2 CCU Date: Thu, 30 Mar 2017 03:46:03 +0800 Message-Id: <20170329194613.55548-2-icenowy@aosc.io> X-Mailer: git-send-email 2.12.0 In-Reply-To: <20170329194613.55548-1-icenowy@aosc.io> References: <20170329194613.55548-1-icenowy@aosc.io> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 1878 Lines: 55 From: Icenowy Zheng Allwinner "Display Engine 2.0" contains some clock controls in it. In order to add them as clock drivers, we need a device tree binding. Add the binding here. Signed-off-by: Icenowy Zheng --- Changes in v3: - Fill the address space length of DE2 CCU to 0x100000, just reach the start of mixer0. .../devicetree/bindings/clock/sun8i-de2.txt | 31 ++++++++++++++++++++++ 1 file changed, 31 insertions(+) create mode 100644 Documentation/devicetree/bindings/clock/sun8i-de2.txt diff --git a/Documentation/devicetree/bindings/clock/sun8i-de2.txt b/Documentation/devicetree/bindings/clock/sun8i-de2.txt new file mode 100644 index 000000000000..34cf79c05f13 --- /dev/null +++ b/Documentation/devicetree/bindings/clock/sun8i-de2.txt @@ -0,0 +1,31 @@ +Allwinner Display Engine 2.0 Clock Control Binding +-------------------------------------------------- + +Required properties : +- compatible: must contain one of the following compatibles: + - "allwinner,sun8i-a83t-de2-clk" + - "allwinner,sun50i-a64-de2-clk" + - "allwinner,sun50i-h5-de2-clk" + +- reg: Must contain the registers base address and length +- clocks: phandle to the clocks feeding the display engine subsystem. + Three are needed: + - "mod": the display engine module clock + - "bus": the bus clock for the whole display engine subsystem +- clock-names: Must contain the clock names described just above +- resets: phandle to the reset control for the display engine subsystem. +- #clock-cells : must contain 1 +- #reset-cells : must contain 1 + +Example: +de2_clocks: clock@01000000 { + compatible = "allwinner,sun50i-a64-de2-clk"; + reg = <0x01000000 0x100000>; + clocks = <&ccu CLK_DE>, + <&ccu CLK_BUS_DE>; + clock-names = "mod", + "bus"; + resets = <&ccu RST_BUS_DE>; + #clock-cells = <1>; + #reset-cells = <1>; +}; -- 2.12.0