Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933328AbdC3Guj (ORCPT ); Thu, 30 Mar 2017 02:50:39 -0400 Received: from conuserg-07.nifty.com ([210.131.2.74]:41061 "EHLO conuserg-07.nifty.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933245AbdC3Gto (ORCPT ); Thu, 30 Mar 2017 02:49:44 -0400 DKIM-Filter: OpenDKIM Filter v2.10.3 conuserg-07.nifty.com v2U6kUcq015463 X-Nifty-SrcIP: [153.142.97.92] From: Masahiro Yamada To: linux-mtd@lists.infradead.org Cc: Enrico Jorns , Artem Bityutskiy , Dinh Nguyen , Boris Brezillon , Marek Vasut , Graham Moore , David Woodhouse , Masami Hiramatsu , Chuanxiao Dong , Jassi Brar , Masahiro Yamada , linux-kernel@vger.kernel.org, Brian Norris , Richard Weinberger , Cyrille Pitchen Subject: [PATCH v3 28/37] mtd: nand: denali: propagate page to helpers via function argument Date: Thu, 30 Mar 2017 15:46:14 +0900 Message-Id: <1490856383-31560-29-git-send-email-yamada.masahiro@socionext.com> X-Mailer: git-send-email 2.7.4 In-Reply-To: <1490856383-31560-1-git-send-email-yamada.masahiro@socionext.com> References: <1490856383-31560-1-git-send-email-yamada.masahiro@socionext.com> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 8225 Lines: 231 This driver stores the currently addressed page into denali->page, which is later read out by helper functions. While I am tackling on this driver, I often missed to insert "denali->page = page;" where necessary. This makes page_read/write callbacks to get access to a wrong page, which is a bug hard to figure out. Instead, I'd rather pass the page via function argument because the compiler's prototype checks will help to detect bugs. For the same reason, propagate dma_addr to the DMA helpers instead of denali->buf.dma_buf . Signed-off-by: Masahiro Yamada --- Changes in v3: None Changes in v2: - Newly added drivers/mtd/nand/denali.c | 58 ++++++++++++++++++++--------------------------- drivers/mtd/nand/denali.h | 1 - 2 files changed, 24 insertions(+), 35 deletions(-) diff --git a/drivers/mtd/nand/denali.c b/drivers/mtd/nand/denali.c index 9dfed20..00d0e9d 100644 --- a/drivers/mtd/nand/denali.c +++ b/drivers/mtd/nand/denali.c @@ -282,7 +282,7 @@ static int denali_dev_ready(struct mtd_info *mtd) * sends a pipeline command operation to the controller. See the Denali NAND * controller's user guide for more information (section 4.2.3.6). */ -static int denali_send_pipeline_cmd(struct denali_nand_info *denali, +static int denali_send_pipeline_cmd(struct denali_nand_info *denali, int page, bool ecc_en, bool transfer_spare, int access_type, int op) { @@ -293,7 +293,7 @@ static int denali_send_pipeline_cmd(struct denali_nand_info *denali, denali_reset_irq(denali); - addr = BANK(denali->flash_bank) | denali->page; + addr = BANK(denali->flash_bank) | page; if (op == DENALI_WRITE && access_type != SPARE_ACCESS) { cmd = MODE_01 | addr; @@ -366,9 +366,7 @@ static int write_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) uint32_t irq_mask = INTR__PROGRAM_COMP | INTR__PROGRAM_FAIL; int status = 0; - denali->page = page; - - if (denali_send_pipeline_cmd(denali, false, false, SPARE_ACCESS, + if (denali_send_pipeline_cmd(denali, page, false, false, SPARE_ACCESS, DENALI_WRITE) == PASS) { write_data_to_flash_mem(denali, buf, mtd->oobsize); @@ -393,9 +391,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) uint32_t irq_mask = INTR__LOAD_COMP; uint32_t irq_status, addr, cmd; - denali->page = page; - - if (denali_send_pipeline_cmd(denali, false, true, SPARE_ACCESS, + if (denali_send_pipeline_cmd(denali, page, false, true, SPARE_ACCESS, DENALI_READ) == PASS) { read_data_from_flash_mem(denali, buf, mtd->oobsize); @@ -407,8 +403,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) irq_status = denali_wait_for_irq(denali, irq_mask); if (!(irq_status & INTR__LOAD_COMP)) - dev_err(denali->dev, "page on OOB timeout %d\n", - denali->page); + dev_err(denali->dev, "page on OOB timeout %d\n", page); /* * We set the device back to MAIN_ACCESS here as I observed @@ -417,7 +412,7 @@ static void read_oob_data(struct mtd_info *mtd, uint8_t *buf, int page) * is reliable (according to the MTD test infrastructure) * if you are in MAIN_ACCESS. */ - addr = BANK(denali->flash_bank) | denali->page; + addr = BANK(denali->flash_bank) | page; cmd = MODE_10 | addr; index_addr(denali, cmd, MAIN_ACCESS); } @@ -582,13 +577,13 @@ static void denali_enable_dma(struct denali_nand_info *denali, bool en) ioread32(denali->flash_reg + DMA_ENABLE); } -static void denali_setup_dma64(struct denali_nand_info *denali, int op) +static void denali_setup_dma64(struct denali_nand_info *denali, + dma_addr_t dma_addr, int page, int op) { uint32_t mode; const int page_count = 1; - uint64_t addr = denali->buf.dma_buf; - mode = MODE_10 | BANK(denali->flash_bank) | denali->page; + mode = MODE_10 | BANK(denali->flash_bank) | page; /* DMA is a three step process */ @@ -599,41 +594,42 @@ static void denali_setup_dma64(struct denali_nand_info *denali, int op) index_addr(denali, mode, 0x01002000 | (64 << 16) | op | page_count); /* 2. set memory low address */ - index_addr(denali, mode, addr); + index_addr(denali, mode, dma_addr); /* 3. set memory high address */ - index_addr(denali, mode, addr >> 32); + index_addr(denali, mode, (uint64_t)dma_addr >> 32); } -static void denali_setup_dma32(struct denali_nand_info *denali, int op) +static void denali_setup_dma32(struct denali_nand_info *denali, + dma_addr_t dma_addr, int page, int op) { uint32_t mode; const int page_count = 1; - uint32_t addr = denali->buf.dma_buf; mode = MODE_10 | BANK(denali->flash_bank); /* DMA is a four step process */ /* 1. setup transfer type and # of pages */ - index_addr(denali, mode | denali->page, 0x2000 | op | page_count); + index_addr(denali, mode | page, 0x2000 | op | page_count); /* 2. set memory high address bits 23:8 */ - index_addr(denali, mode | ((addr >> 16) << 8), 0x2200); + index_addr(denali, mode | ((dma_addr >> 16) << 8), 0x2200); /* 3. set memory low address bits 23:8 */ - index_addr(denali, mode | ((addr & 0xffff) << 8), 0x2300); + index_addr(denali, mode | ((dma_addr & 0xffff) << 8), 0x2300); /* 4. interrupt when complete, burst len = 64 bytes */ index_addr(denali, mode | 0x14000, 0x2400); } -static void denali_setup_dma(struct denali_nand_info *denali, int op) +static void denali_setup_dma(struct denali_nand_info *denali, + dma_addr_t dma_addr, int page, int op) { if (denali->caps & DENALI_CAP_DMA_64BIT) - denali_setup_dma64(denali, op); + denali_setup_dma64(denali, dma_addr, page, op); else - denali_setup_dma32(denali, op); + denali_setup_dma32(denali, dma_addr, page, op); } /* @@ -650,8 +646,6 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip, uint32_t irq_mask = INTR__DMA_CMD_COMP | INTR__PROGRAM_FAIL; int ret = 0; - denali->page = page; - /* * if it is a raw xfer, we want to disable ecc and send the spare area. * !raw_xfer - enable ecc @@ -674,7 +668,7 @@ static int write_page(struct mtd_info *mtd, struct nand_chip *chip, denali_reset_irq(denali); denali_enable_dma(denali, true); - denali_setup_dma(denali, DENALI_WRITE); + denali_setup_dma(denali, addr, page, DENALI_WRITE); /* wait for operation to complete */ irq_status = denali_wait_for_irq(denali, irq_mask); @@ -750,15 +744,13 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, unsigned long uncor_ecc_flags = 0; int stat = 0; - denali->page = page; - setup_ecc_for_xfer(denali, true, false); denali_enable_dma(denali, true); dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); denali_reset_irq(denali); - denali_setup_dma(denali, DENALI_READ); + denali_setup_dma(denali, addr, page, DENALI_READ); /* wait for operation to complete */ irq_status = denali_wait_for_irq(denali, irq_mask); @@ -777,7 +769,7 @@ static int denali_read_page(struct mtd_info *mtd, struct nand_chip *chip, return stat; if (uncor_ecc_flags) { - read_oob_data(mtd, chip->oob_poi, denali->page); + read_oob_data(mtd, chip->oob_poi, page); stat = denali_check_erased_page(mtd, chip, buf, uncor_ecc_flags, stat); @@ -795,15 +787,13 @@ static int denali_read_page_raw(struct mtd_info *mtd, struct nand_chip *chip, uint32_t irq_mask = INTR__DMA_CMD_COMP; uint32_t irq_status; - denali->page = page; - setup_ecc_for_xfer(denali, false, true); denali_enable_dma(denali, true); dma_sync_single_for_device(denali->dev, addr, size, DMA_FROM_DEVICE); denali_reset_irq(denali); - denali_setup_dma(denali, DENALI_READ); + denali_setup_dma(denali, addr, page, DENALI_READ); /* wait for operation to complete */ irq_status = denali_wait_for_irq(denali, irq_mask); diff --git a/drivers/mtd/nand/denali.h b/drivers/mtd/nand/denali.h index 7d64167..5f917a0 100644 --- a/drivers/mtd/nand/denali.h +++ b/drivers/mtd/nand/denali.h @@ -317,7 +317,6 @@ struct denali_nand_info { int flash_bank; /* currently selected chip */ struct nand_buf buf; struct device *dev; - int page; void __iomem *flash_reg; /* Register Interface */ void __iomem *flash_mem; /* Host Data/Command Interface */ -- 2.7.4