Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S933467AbdCaLc4 (ORCPT ); Fri, 31 Mar 2017 07:32:56 -0400 Received: from mail-wr0-f179.google.com ([209.85.128.179]:36533 "EHLO mail-wr0-f179.google.com" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S933455AbdCaLcw (ORCPT ); Fri, 31 Mar 2017 07:32:52 -0400 From: Olliver Schinagl X-Google-Original-From: Olliver Schinagl Subject: Re: [PATCH] serial: tegra: Map the iir register to default defines To: Shardar Mohammed , Jonathan Hunter , Laxman Dewangan , Greg Kroah-Hartman , Jiri Slaby , Stephen Warren , Thierry Reding , Alexandre Courbot References: <20170329184806.6577-1-oliver@schinagl.nl> <58DCDB54.5040005@nvidia.com> <83c51151685d4be7926f7f3982c59db8@bgmail102.nvidia.com> <79efc1286adc4119be65e0b237aebbc3@bgmail102.nvidia.com> Cc: "linux-serial@vger.kernel.org" , "linux-tegra@vger.kernel.org" , "linux-kernel@vger.kernel.org" Message-ID: Date: Fri, 31 Mar 2017 13:32:43 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Icedove/45.6.0 MIME-Version: 1.0 In-Reply-To: <79efc1286adc4119be65e0b237aebbc3@bgmail102.nvidia.com> Content-Type: text/plain; charset=windows-1252; format=flowed Content-Transfer-Encoding: 7bit Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2614 Lines: 71 Hey Shadar, On 31-03-17 12:42, Shardar Mohammed wrote: >> On 31/03/17 11:07, Shardar Mohammed wrote: >>> Verification failed on Tegra. >>> Fix here is, IIR should be masked with UART_IIR_MASK after reading the IIR >> register as on Tegra bit-6 is used for internal usage to know if FIFO mode is >> enabled. >>> while (1) { >>> iir = tegra_uart_read(tup, UART_IIR); >>> +iir &= UART_IIR_MASK; >> >> Per Olliver's original email did you pick up the other patch [0] before applying >> this because that does apply the mask. I mentioned to Olliver that this should >> really be a series, so it is clear that this patch is dependent upon the other. > > For UART_IIR_MASK macro, dependent patch is required if we add this required line. > But here to fix the issue with the current patch above masking step is necessary. Yeah the other big patch adds this line (and does some other fixes to the tegra driver with regards to the UART_IIR_MASK). I did not make it a 'set' because the other patch has a big big list of names and touches a lot of serial devices. So both 'groups' would get a lot of noise. I'm sorry if this caused confusion. If you guys prefer, I'll turn it into a set. Again, sorry for the inconvenience, Olliver > >> >>> -----Original Message----- >>> From: Laxman Dewangan >>> Sent: Thursday, March 30, 2017 3:48 PM >>> To: Olliver Schinagl ; Greg Kroah-Hartman >>> ; Jiri Slaby ; Stephen >>> Warren ; Thierry Reding >>> ; Alexandre Courbot >>> Cc: linux-serial@vger.kernel.org; linux-tegra@vger.kernel.org; >>> linux-kernel@vger.kernel.org; Shardar Mohammed >> >>> Subject: Re: [PATCH] serial: tegra: Map the iir register to default >>> defines >>> >>> >>> On Thursday 30 March 2017 12:18 AM, Olliver Schinagl wrote: >>>> The tegra serial IP seems to be following the common layout and the >>>> interrupt ID's match up nicely. Replace the magic values to match the >>>> common serial_reg defines, with the addition of the Tegra unique End >>>> of Data interrupt. >>>> >>>> Signed-off-by: Olliver Schinagl >>>> --- >>> >>> Adding Shardar for verifications. >>> >>> Acked-by: Laxman Dewangan >> >> Furthermore does this ACK imply that you have reviewed the other patch this >> one is dependent upon? >> > Yes dependent change looks fine, but I have not tested it. > >> Cheers >> Jon >> >> [0] http://marc.info/?l=linux-serial&m=149081309627392&w=2 >> >> -- >> nvpublic