Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755434AbdDECKI (ORCPT ); Tue, 4 Apr 2017 22:10:08 -0400 Received: from mx0b-001b2d01.pphosted.com ([148.163.158.5]:54595 "EHLO mx0a-001b2d01.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755055AbdDECKD (ORCPT ); Tue, 4 Apr 2017 22:10:03 -0400 From: Christopher Bostic To: robh+dt@kernel.org, mark.rutland@arm.com, linux@armlinux.org.uk, rostedt@goodmis.org, mingo@redhat.com, gregkh@linuxfoundation.org, devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org Cc: Chris Bostic , joel@jms.id.au, linux-kernel@vger.kernel.org, andrew@aj.id.au, alistair@popple.id.au, benh@kernel.crashing.org, "Edward A . James" , Jeremy Kerr Subject: [PATCH v5 19/23] drivers/fsi: Add GPIO based FSI master Date: Tue, 4 Apr 2017 21:06:03 -0500 X-Mailer: git-send-email 2.10.1 (Apple Git-78) In-Reply-To: <20170405020607.79939-1-cbostic@linux.vnet.ibm.com> References: <20170405020607.79939-1-cbostic@linux.vnet.ibm.com> X-TM-AS-GCONF: 00 x-cbid: 17040502-0056-0000-0000-0000032DEA5E X-IBM-SpamModules-Scores: X-IBM-SpamModules-Versions: BY=3.00006884; HX=3.00000240; KW=3.00000007; PH=3.00000004; SC=3.00000208; SDB=6.00843220; UDB=6.00415442; IPR=6.00621396; BA=6.00005266; NDR=6.00000001; ZLA=6.00000005; ZF=6.00000009; ZB=6.00000000; ZP=6.00000000; ZH=6.00000000; ZU=6.00000002; MB=3.00014914; XFM=3.00000013; UTC=2017-04-05 02:09:55 X-IBM-AV-DETECTION: SAVI=unused REMOTE=unused XFE=unused x-cbparentid: 17040502-0057-0000-0000-00000763EBBD Message-Id: <20170405020607.79939-20-cbostic@linux.vnet.ibm.com> X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-04-05_01:,, signatures=0 X-Proofpoint-Spam-Details: rule=outbound_notspam policy=outbound score=0 spamscore=0 suspectscore=0 malwarescore=0 phishscore=0 adultscore=0 bulkscore=0 classifier=spam adjust=0 reason=mlx scancount=1 engine=8.0.1-1702020001 definitions=main-1704050018 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 17056 Lines: 666 From: Chris Bostic Implement a FSI master using GPIO. Will generate FSI protocol for read and write commands to particular addresses. Sends master command and waits for and decodes a slave response. Includes changes from Edward A. James and Jeremy Kerr . Signed-off-by: Edward A. James Signed-off-by: Jeremy Kerr Signed-off-by: Chris Bostic Signed-off-by: Joel Stanley --- drivers/fsi/Kconfig | 11 + drivers/fsi/Makefile | 1 + drivers/fsi/fsi-master-gpio.c | 610 ++++++++++++++++++++++++++++++++++++++++++ 3 files changed, 622 insertions(+) create mode 100644 drivers/fsi/fsi-master-gpio.c diff --git a/drivers/fsi/Kconfig b/drivers/fsi/Kconfig index 04c1a0e..9cf8345 100644 --- a/drivers/fsi/Kconfig +++ b/drivers/fsi/Kconfig @@ -9,4 +9,15 @@ config FSI ---help--- FSI - the FRU Support Interface - is a simple bus for low-level access to POWER-based hardware. + +if FSI + +config FSI_MASTER_GPIO + tristate "GPIO-based FSI master" + depends on FSI && GPIOLIB + ---help--- + This option enables a FSI master driver using GPIO lines. + +endif + endmenu diff --git a/drivers/fsi/Makefile b/drivers/fsi/Makefile index db0e5e7..ed28ac0 100644 --- a/drivers/fsi/Makefile +++ b/drivers/fsi/Makefile @@ -1,2 +1,3 @@ obj-$(CONFIG_FSI) += fsi-core.o +obj-$(CONFIG_FSI_MASTER_GPIO) += fsi-master-gpio.o diff --git a/drivers/fsi/fsi-master-gpio.c b/drivers/fsi/fsi-master-gpio.c new file mode 100644 index 0000000..9fedfaf --- /dev/null +++ b/drivers/fsi/fsi-master-gpio.c @@ -0,0 +1,610 @@ +/* + * A FSI master controller, using a simple GPIO bit-banging interface + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include + +#include "fsi-master.h" + +#define FSI_GPIO_STD_DLY 1 /* Standard pin delay in nS */ +#define FSI_ECHO_DELAY_CLOCKS 16 /* Number clocks for echo delay */ +#define FSI_PRE_BREAK_CLOCKS 50 /* Number clocks to prep for break */ +#define FSI_BREAK_CLOCKS 256 /* Number of clocks to issue break */ +#define FSI_POST_BREAK_CLOCKS 16000 /* Number clocks to set up cfam */ +#define FSI_INIT_CLOCKS 5000 /* Clock out any old data */ +#define FSI_GPIO_STD_DELAY 10 /* Standard GPIO delay in nS */ + /* todo: adjust down as low as */ + /* possible or eliminate */ +#define FSI_GPIO_CMD_DPOLL 0x2 +#define FSI_GPIO_CMD_TERM 0x3f +#define FSI_GPIO_CMD_ABS_AR 0x4 + +#define FSI_GPIO_DPOLL_CLOCKS 100 /* < 21 will cause slave to hang */ + +/* Bus errors */ +#define FSI_GPIO_ERR_BUSY 1 /* Slave stuck in busy state */ +#define FSI_GPIO_RESP_ERRA 2 /* Any (misc) Error */ +#define FSI_GPIO_RESP_ERRC 3 /* Slave reports master CRC error */ +#define FSI_GPIO_MTOE 4 /* Master time out error */ +#define FSI_GPIO_CRC_INVAL 5 /* Master reports slave CRC error */ + +/* Normal slave responses */ +#define FSI_GPIO_RESP_BUSY 1 +#define FSI_GPIO_RESP_ACK 0 +#define FSI_GPIO_RESP_ACKD 4 + +#define FSI_GPIO_MAX_BUSY 100 +#define FSI_GPIO_MTOE_COUNT 1000 +#define FSI_GPIO_DRAIN_BITS 20 +#define FSI_GPIO_CRC_SIZE 4 +#define FSI_GPIO_MSG_ID_SIZE 2 +#define FSI_GPIO_MSG_RESPID_SIZE 2 +#define FSI_GPIO_PRIME_SLAVE_CLOCKS 100 + +static DEFINE_SPINLOCK(fsi_gpio_cmd_lock); /* lock around fsi commands */ + +struct fsi_master_gpio { + struct fsi_master master; + struct device *dev; + struct gpio_desc *gpio_clk; + struct gpio_desc *gpio_data; + struct gpio_desc *gpio_trans; /* Voltage translator */ + struct gpio_desc *gpio_enable; /* FSI enable */ + struct gpio_desc *gpio_mux; /* Mux control */ +}; + +#define to_fsi_master_gpio(m) container_of(m, struct fsi_master_gpio, master) + +struct fsi_gpio_msg { + uint64_t msg; + uint8_t bits; +}; + +static void clock_toggle(struct fsi_master_gpio *master, int count) +{ + int i; + + for (i = 0; i < count; i++) { + ndelay(FSI_GPIO_STD_DLY); + gpiod_set_value(master->gpio_clk, 0); + ndelay(FSI_GPIO_STD_DLY); + gpiod_set_value(master->gpio_clk, 1); + } +} + +static int sda_in(struct fsi_master_gpio *master) +{ + int in; + + ndelay(FSI_GPIO_STD_DLY); + in = gpiod_get_value(master->gpio_data); + return in ? 1 : 0; +} + +static void sda_out(struct fsi_master_gpio *master, int value) +{ + gpiod_set_value(master->gpio_data, value); +} + +static void set_sda_input(struct fsi_master_gpio *master) +{ + gpiod_direction_input(master->gpio_data); + if (master->gpio_trans) + gpiod_set_value(master->gpio_trans, 0); +} + +static void set_sda_output(struct fsi_master_gpio *master, int value) +{ + if (master->gpio_trans) + gpiod_set_value(master->gpio_trans, 1); + gpiod_direction_output(master->gpio_data, value); +} + +static void clock_zeros(struct fsi_master_gpio *master, int count) +{ + set_sda_output(master, 1); + clock_toggle(master, count); +} + +static void serial_in(struct fsi_master_gpio *master, struct fsi_gpio_msg *msg, + uint8_t num_bits) +{ + uint8_t bit, in_bit; + + set_sda_input(master); + + for (bit = 0; bit < num_bits; bit++) { + clock_toggle(master, 1); + in_bit = sda_in(master); + msg->msg <<= 1; + msg->msg |= ~in_bit & 0x1; /* Data is negative active */ + } + msg->bits += num_bits; +} + +static void serial_out(struct fsi_master_gpio *master, + const struct fsi_gpio_msg *cmd) +{ + uint8_t bit; + uint64_t msg = ~cmd->msg; /* Data is negative active */ + uint64_t sda_mask = 0x1ULL << (cmd->bits - 1); + uint64_t last_bit = ~0; + int next_bit; + + if (!cmd->bits) { + dev_warn(master->dev, "trying to output 0 bits\n"); + return; + } + set_sda_output(master, 0); + + /* Send the start bit */ + sda_out(master, 0); + clock_toggle(master, 1); + + /* Send the message */ + for (bit = 0; bit < cmd->bits; bit++) { + next_bit = (msg & sda_mask) >> (cmd->bits - 1); + if (last_bit ^ next_bit) { + sda_out(master, next_bit); + last_bit = next_bit; + } + clock_toggle(master, 1); + msg <<= 1; + } +} + +static void msg_push_bits(struct fsi_gpio_msg *msg, uint64_t data, int bits) +{ + msg->msg <<= bits; + msg->msg |= data & ((1ull << bits) - 1); + msg->bits += bits; +} + +static void msg_push_crc(struct fsi_gpio_msg *msg) +{ + uint8_t crc; + int top; + + top = msg->bits & 0x3; + + /* start bit, and any non-aligned top bits */ + crc = fsi_crc4(0, + 1 << top | msg->msg >> (msg->bits - top), + top + 1); + + /* aligned bits */ + crc = fsi_crc4(crc, msg->msg, msg->bits - top); + + msg_push_bits(msg, crc, 4); +} + +static void build_abs_ar_command(struct fsi_gpio_msg *cmd, + uint8_t id, uint32_t addr, size_t size, const void *data) +{ + bool write = !!data; + uint8_t ds; + int i; + + cmd->bits = 0; + cmd->msg = 0; + + msg_push_bits(cmd, id, 2); + msg_push_bits(cmd, FSI_GPIO_CMD_ABS_AR, 3); + msg_push_bits(cmd, write ? 0 : 1, 1); + + /* + * The read/write size is encoded in the lower bits of the address + * (as it must be naturally-aligned), and the following ds bit. + * + * size addr:1 addr:0 ds + * 1 x x 0 + * 2 x 0 1 + * 4 0 1 1 + * + */ + ds = size > 1 ? 1 : 0; + addr &= ~(size - 1); + if (size == 4) + addr |= 1; + + msg_push_bits(cmd, addr & ((1 << 21) - 1), 21); + msg_push_bits(cmd, ds, 1); + for (i = 0; write && i < size; i++) + msg_push_bits(cmd, ((uint8_t *)data)[i], 8); + + msg_push_crc(cmd); +} + +static void build_dpoll_command(struct fsi_gpio_msg *cmd, uint8_t slave_id) +{ + cmd->bits = 0; + cmd->msg = 0; + + msg_push_bits(cmd, slave_id, 2); + msg_push_bits(cmd, FSI_GPIO_CMD_DPOLL, 3); + msg_push_crc(cmd); +} + +static void echo_delay(struct fsi_master_gpio *master) +{ + set_sda_output(master, 1); + clock_toggle(master, FSI_ECHO_DELAY_CLOCKS); +} + +static void build_term_command(struct fsi_gpio_msg *cmd, uint8_t slave_id) +{ + cmd->bits = 0; + cmd->msg = 0; + + msg_push_bits(cmd, slave_id, 2); + msg_push_bits(cmd, FSI_GPIO_CMD_TERM, 6); + msg_push_crc(cmd); +} + +/* + * Store information on master errors so handler can detect and clean + * up the bus + */ +static void fsi_master_gpio_error(struct fsi_master_gpio *master, int error) +{ + +} + +static int read_one_response(struct fsi_master_gpio *master, + uint8_t data_size, struct fsi_gpio_msg *msgp, uint8_t *tagp) +{ + struct fsi_gpio_msg msg; + uint8_t id, tag; + uint32_t crc; + int i; + + /* wait for the start bit */ + for (i = 0; i < FSI_GPIO_MTOE_COUNT; i++) { + msg.bits = 0; + msg.msg = 0; + serial_in(master, &msg, 1); + if (msg.msg) + break; + } + if (i >= FSI_GPIO_MTOE_COUNT) { + dev_dbg(master->dev, + "Master time out waiting for response\n"); + fsi_master_gpio_error(master, FSI_GPIO_MTOE); + return -EIO; + } + + msg.bits = 0; + msg.msg = 0; + + /* Read slave ID & response tag */ + serial_in(master, &msg, 4); + + id = (msg.msg >> FSI_GPIO_MSG_RESPID_SIZE) & 0x3; + tag = msg.msg & 0x3; + + /* if we have an ACK, and we're expecting data, clock the + * data in too + */ + if (tag == FSI_GPIO_RESP_ACK && data_size) + serial_in(master, &msg, data_size * 8); + + /* read CRC */ + serial_in(master, &msg, FSI_GPIO_CRC_SIZE); + + /* we have a whole message now; check CRC */ + crc = fsi_crc4(0, 1, 1); + crc = fsi_crc4(crc, msg.msg, msg.bits); + if (crc) { + dev_dbg(master->dev, "ERR response CRC\n"); + fsi_master_gpio_error(master, FSI_GPIO_CRC_INVAL); + return -EIO; + } + + if (msgp) + *msgp = msg; + if (tagp) + *tagp = tag; + + return 0; +} + +static int issue_term(struct fsi_master_gpio *master, uint8_t slave) +{ + struct fsi_gpio_msg cmd; + uint8_t tag; + int rc; + + build_term_command(&cmd, slave); + serial_out(master, &cmd); + echo_delay(master); + + rc = read_one_response(master, 0, NULL, &tag); + if (rc) { + dev_err(master->dev, + "TERM failed; lost communication with slave\n"); + return -EIO; + } else if (tag != FSI_GPIO_RESP_ACK) { + dev_err(master->dev, "TERM failed; response %d\n", tag); + return -EIO; + } + + return 0; +} + +static int poll_for_response(struct fsi_master_gpio *master, + uint8_t slave, uint8_t size, void *data) +{ + struct fsi_gpio_msg response, cmd; + int busy_count = 0, rc, i; + uint8_t tag; + +retry: + rc = read_one_response(master, size, &response, &tag); + if (rc) + return rc; + + switch (tag) { + case FSI_GPIO_RESP_ACK: + if (size && data) { + uint64_t val = response.msg; + /* clear crc & mask */ + val >>= 4; + val &= (1ull << (size * 8)) - 1; + + for (i = 0; i < size; i++) { + ((uint8_t *)data)[size-i-1] = + val & 0xff; + val >>= 8; + } + } + break; + case FSI_GPIO_RESP_BUSY: + /* + * Its necessary to clock slave before issuing + * d-poll, not indicated in the hardware protocol + * spec. < 20 clocks causes slave to hang, 21 ok. + */ + clock_zeros(master, FSI_GPIO_DPOLL_CLOCKS); + if (busy_count++ < FSI_GPIO_MAX_BUSY) { + build_dpoll_command(&cmd, slave); + serial_out(master, &cmd); + echo_delay(master); + goto retry; + } + dev_warn(master->dev, + "ERR slave is stuck in busy state, issuing TERM\n"); + issue_term(master, slave); + rc = -EIO; + break; + + case FSI_GPIO_RESP_ERRA: + case FSI_GPIO_RESP_ERRC: + dev_dbg(master->dev, "ERR%c received: 0x%x\n", + tag == FSI_GPIO_RESP_ERRA ? 'A' : 'C', + (int)response.msg); + fsi_master_gpio_error(master, response.msg); + rc = -EIO; + break; + } + + /* Clock the slave enough to be ready for next operation */ + clock_zeros(master, FSI_GPIO_PRIME_SLAVE_CLOCKS); + return rc; +} + +static int fsi_master_gpio_xfer(struct fsi_master_gpio *master, uint8_t slave, + struct fsi_gpio_msg *cmd, size_t resp_len, void *resp) +{ + unsigned long flags; + int rc; + + spin_lock_irqsave(&fsi_gpio_cmd_lock, flags); + serial_out(master, cmd); + echo_delay(master); + rc = poll_for_response(master, slave, resp_len, resp); + spin_unlock_irqrestore(&fsi_gpio_cmd_lock, flags); + + return rc; +} + +static int fsi_master_gpio_read(struct fsi_master *_master, int link, + uint8_t id, uint32_t addr, void *val, size_t size) +{ + struct fsi_master_gpio *master = to_fsi_master_gpio(_master); + struct fsi_gpio_msg cmd; + + if (link != 0) + return -ENODEV; + + build_abs_ar_command(&cmd, id, addr, size, NULL); + return fsi_master_gpio_xfer(master, id, &cmd, size, val); +} + +static int fsi_master_gpio_write(struct fsi_master *_master, int link, + uint8_t id, uint32_t addr, const void *val, size_t size) +{ + struct fsi_master_gpio *master = to_fsi_master_gpio(_master); + struct fsi_gpio_msg cmd; + + if (link != 0) + return -ENODEV; + + build_abs_ar_command(&cmd, id, addr, size, val); + return fsi_master_gpio_xfer(master, id, &cmd, 0, NULL); +} + +static int fsi_master_gpio_term(struct fsi_master *_master, + int link, uint8_t id) +{ + struct fsi_master_gpio *master = to_fsi_master_gpio(_master); + struct fsi_gpio_msg cmd; + + if (link != 0) + return -ENODEV; + + build_term_command(&cmd, id); + return fsi_master_gpio_xfer(master, id, &cmd, 0, NULL); +} + +/* + * Issue a break command on link + */ +static int fsi_master_gpio_break(struct fsi_master *_master, int link) +{ + struct fsi_master_gpio *master = to_fsi_master_gpio(_master); + + if (link != 0) + return -ENODEV; + + set_sda_output(master, 1); + sda_out(master, 1); + clock_toggle(master, FSI_PRE_BREAK_CLOCKS); + sda_out(master, 0); + clock_toggle(master, FSI_BREAK_CLOCKS); + echo_delay(master); + sda_out(master, 1); + clock_toggle(master, FSI_POST_BREAK_CLOCKS); + + /* Wait for logic reset to take effect */ + udelay(200); + + return 0; +} + +static void fsi_master_gpio_init(struct fsi_master_gpio *master) +{ + if (master->gpio_mux) + gpiod_direction_output(master->gpio_mux, 1); + if (master->gpio_trans) + gpiod_direction_output(master->gpio_trans, 1); + if (master->gpio_enable) + gpiod_direction_output(master->gpio_enable, 1); + gpiod_direction_output(master->gpio_clk, 1); + gpiod_direction_output(master->gpio_data, 1); + + /* todo: evaluate if clocks can be reduced */ + clock_zeros(master, FSI_INIT_CLOCKS); +} + +static int fsi_master_gpio_link_enable(struct fsi_master *_master, int link) +{ + struct fsi_master_gpio *master = to_fsi_master_gpio(_master); + + if (link != 0) + return -ENODEV; + if (master->gpio_enable) + gpiod_set_value(master->gpio_enable, 1); + + return 0; +} + +static void fsi_master_gpio_release(struct device *dev) +{ +} + +static int fsi_master_gpio_probe(struct platform_device *pdev) +{ + struct fsi_master_gpio *master; + struct gpio_desc *gpio; + + master = devm_kzalloc(&pdev->dev, sizeof(*master), GFP_KERNEL); + if (!master) + return -ENOMEM; + + master->dev = &pdev->dev; + master->master.dev.parent = master->dev; + master->master.dev.release = fsi_master_gpio_release; + + gpio = devm_gpiod_get(&pdev->dev, "clock", 0); + if (IS_ERR(gpio)) { + dev_err(&pdev->dev, "failed to get clock gpio\n"); + return PTR_ERR(gpio); + } + master->gpio_clk = gpio; + + gpio = devm_gpiod_get(&pdev->dev, "data", 0); + if (IS_ERR(gpio)) { + dev_err(&pdev->dev, "failed to get data gpio\n"); + return PTR_ERR(gpio); + } + master->gpio_data = gpio; + + /* Optional GPIOs */ + gpio = devm_gpiod_get_optional(&pdev->dev, "trans", 0); + if (IS_ERR(gpio)) { + dev_err(&pdev->dev, "failed to get trans gpio\n"); + return PTR_ERR(gpio); + } + master->gpio_trans = gpio; + + gpio = devm_gpiod_get_optional(&pdev->dev, "enable", 0); + if (IS_ERR(gpio)) { + dev_err(&pdev->dev, "failed to get enable gpio\n"); + return PTR_ERR(gpio); + } + master->gpio_enable = gpio; + + gpio = devm_gpiod_get_optional(&pdev->dev, "mux", 0); + if (IS_ERR(gpio)) { + dev_err(&pdev->dev, "failed to get mux gpio\n"); + return PTR_ERR(gpio); + } + master->gpio_mux = gpio; + + master->master.n_links = 1; + master->master.read = fsi_master_gpio_read; + master->master.write = fsi_master_gpio_write; + master->master.term = fsi_master_gpio_term; + master->master.send_break = fsi_master_gpio_break; + master->master.link_enable = fsi_master_gpio_link_enable; + platform_set_drvdata(pdev, master); + + fsi_master_gpio_init(master); + + fsi_master_register(&master->master); + + return 0; +} + + +static int fsi_master_gpio_remove(struct platform_device *pdev) +{ + struct fsi_master_gpio *master = platform_get_drvdata(pdev); + + devm_gpiod_put(&pdev->dev, master->gpio_clk); + devm_gpiod_put(&pdev->dev, master->gpio_data); + if (master->gpio_trans) + devm_gpiod_put(&pdev->dev, master->gpio_trans); + if (master->gpio_enable) + devm_gpiod_put(&pdev->dev, master->gpio_enable); + if (master->gpio_mux) + devm_gpiod_put(&pdev->dev, master->gpio_mux); + fsi_master_unregister(&master->master); + + return 0; +} + +static const struct of_device_id fsi_master_gpio_match[] = { + { .compatible = "fsi-master-gpio" }, + { }, +}; + +static struct platform_driver fsi_master_gpio_driver = { + .driver = { + .name = "fsi-master-gpio", + .of_match_table = fsi_master_gpio_match, + }, + .probe = fsi_master_gpio_probe, + .remove = fsi_master_gpio_remove, +}; + +module_platform_driver(fsi_master_gpio_driver); +MODULE_LICENSE("GPL"); -- 1.8.2.2