Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S1755344AbdDEOGq (ORCPT ); Wed, 5 Apr 2017 10:06:46 -0400 Received: from bhuna.collabora.co.uk ([46.235.227.227]:52051 "EHLO bhuna.collabora.co.uk" rhost-flags-OK-OK-OK-OK) by vger.kernel.org with ESMTP id S1753300AbdDEOGQ (ORCPT ); Wed, 5 Apr 2017 10:06:16 -0400 From: Sjoerd Simons To: John Youn , Heiko Stuebner Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Randy Li , linux-rockchip@lists.infradead.org, Rob Herring , Kishon Vijay Abraham I , Mark Rutland , linux-arm-kernel@lists.infradead.org Subject: [PATCH 1/3] phy: rockchip-usb: Add vbus regulator support. Date: Wed, 5 Apr 2017 16:06:10 +0200 Message-Id: <20170405140613.4444-2-sjoerd.simons@collabora.co.uk> X-Mailer: git-send-email 2.11.0 In-Reply-To: <20170405140613.4444-1-sjoerd.simons@collabora.co.uk> References: <20170405140613.4444-1-sjoerd.simons@collabora.co.uk> Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 2451 Lines: 76 On rockchip devices vbus is supplied by a separate power supply, often through a regulator. Add support for describing the the regulator in device-tree following the same convention as several other usb phy's. Signed-off-by: Sjoerd Simons --- .../devicetree/bindings/phy/rockchip-usb-phy.txt | 1 + drivers/phy/phy-rockchip-usb.c | 19 +++++++++++++++++++ 2 files changed, 20 insertions(+) diff --git a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt index 57dc388e2fa2..4ed569046daf 100644 --- a/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt +++ b/Documentation/devicetree/bindings/phy/rockchip-usb-phy.txt @@ -30,6 +30,7 @@ Optional Properties: - reset-names: Only allow the following entries: - phy-reset - resets: Must contain an entry for each entry in reset-names. +- vbus-supply: power-supply phandle for vbus power source Example: diff --git a/drivers/phy/phy-rockchip-usb.c b/drivers/phy/phy-rockchip-usb.c index 734987fa0ad7..3378eeb7a562 100644 --- a/drivers/phy/phy-rockchip-usb.c +++ b/drivers/phy/phy-rockchip-usb.c @@ -66,6 +66,7 @@ struct rockchip_usb_phy { struct phy *phy; bool uart_enabled; struct reset_control *reset; + struct regulator *vbus; }; static int rockchip_usb_phy_power(struct rockchip_usb_phy *phy, @@ -88,6 +89,9 @@ static void rockchip_usb_phy480m_disable(struct clk_hw *hw) struct rockchip_usb_phy, clk480m_hw); + if (phy->vbus) + regulator_disable(phy->vbus); + /* Power down usb phy analog blocks by set siddq 1 */ rockchip_usb_phy_power(phy, 1); } @@ -143,6 +147,14 @@ static int rockchip_usb_phy_power_on(struct phy *_phy) if (phy->uart_enabled) return -EBUSY; + if (phy->vbus) { + int ret; + + ret = regulator_enable(phy->vbus); + if (ret) + return ret; + } + return clk_prepare_enable(phy->clk480m); } @@ -268,6 +280,13 @@ static int rockchip_usb_phy_init(struct rockchip_usb_phy_base *base, } phy_set_drvdata(rk_phy->phy, rk_phy); + rk_phy->vbus = devm_regulator_get_optional(&rk_phy->phy->dev, "vbus"); + if (IS_ERR(rk_phy->vbus)) { + if (PTR_ERR(rk_phy->vbus) == -EPROBE_DEFER) + return PTR_ERR(rk_phy->vbus); + rk_phy->vbus = NULL; + } + /* * When acting as uart-pipe, just keep clock on otherwise * only power up usb phy when it use, so disable it when init -- 2.11.0