Return-Path: Received: (majordomo@vger.kernel.org) by vger.kernel.org via listexpand id S932837AbdDEPt3 (ORCPT ); Wed, 5 Apr 2017 11:49:29 -0400 Received: from mx08-00178001.pphosted.com ([91.207.212.93]:38289 "EHLO mx07-00178001.pphosted.com" rhost-flags-OK-OK-OK-FAIL) by vger.kernel.org with ESMTP id S1755278AbdDEPtD (ORCPT ); Wed, 5 Apr 2017 11:49:03 -0400 Subject: Re: [PATCH 2/4] iio: dac: add support for stm32 DAC To: Jonathan Cameron , , , , , References: <1490960707-22422-1-git-send-email-fabrice.gasnier@st.com> <1490960707-22422-3-git-send-email-fabrice.gasnier@st.com> CC: , , , , , , , , , , From: Fabrice Gasnier Message-ID: <523a6842-7ffe-2236-dda8-6278c8637fa6@st.com> Date: Wed, 5 Apr 2017 17:48:06 +0200 User-Agent: Mozilla/5.0 (X11; Linux x86_64; rv:45.0) Gecko/20100101 Thunderbird/45.8.0 MIME-Version: 1.0 In-Reply-To: Content-Type: text/plain; charset="windows-1252" Content-Transfer-Encoding: 7bit X-Originating-IP: [10.75.127.49] X-ClientProxiedBy: SFHDAG6NODE3.st.com (10.75.127.18) To SFHDAG5NODE3.st.com (10.75.127.15) X-Proofpoint-Virus-Version: vendor=fsecure engine=2.50.10432:,, definitions=2017-04-05_12:,, signatures=0 Sender: linux-kernel-owner@vger.kernel.org List-ID: X-Mailing-List: linux-kernel@vger.kernel.org Content-Length: 20813 Lines: 663 On 04/02/2017 01:32 PM, Jonathan Cameron wrote: > On 31/03/17 12:45, Fabrice Gasnier wrote: >> Add support for STMicroelectronics STM32 DAC. It's a 12-bit, voltage >> output digital-to-analog converter. It has two output channels, each >> with its own converter. >> It supports 8 bits or 12bits left/right aligned data format. Only >> 12bits right-aligned is used here. It has built-in noise or >> triangle waveform generator, and supports external triggers for >> conversions. >> Each channel can be used independently, with separate trigger, then >> separate IIO devices are used to handle this. Core driver is intended >> to share common resources such as clock, reset, reference voltage and >> registers. >> >> Signed-off-by: Fabrice Gasnier > Annoyingly my laptop just crashed mid way through reviewing this.. > Hi Jonathan, I hope I have nothing to do with this ;-) > Ah well, hopefully I'll remember everything (there wasn't much). > > For DACs the 'enable' attribute is not normally used. Rather we > use the powerdown one. The reasoning being that we care about what > the state is when it is powered down. Even if that isn't controllable > I would expect to see it exported as powerdown_mode with a fixed value. > Ok, I'll try to use powerdown_mode in V2 as other DACs do. For now, basically, I'll remap same functionality as 'enable' of this patch. What do you mean by 'fixed value' ? But, this also raise me one question: Current patch use 'enable' to set EN bits in control register. Then, DAC output goes from Hi-Z to buffered output. There is also other power modes available. One of them is 'unbuffered': output buffer can be disabled/bypassed. This typically can save power, but it only makes sense to use it depending on output load impedance (This is explained in AN3126 as you pointed out in later patch). Current patch uses buffered output (which suits all needs regarding output load impedance). And the question is... Should I expose this power modes to userland by using 'powerdown_mode' ? OR... I'd rather rely on a dt property like st,dac-output-mode to manage this, because buffered/unbuffered output modes depends on HW output load impedance. Do you agree with this approach to use: - powerdown_mode as Hi-Z / enable switch, with dedicated dt property to set output power mode ? Please let me know your opinion. But, I think this can be part of another patchset... > Other than that - looks pretty good to me. > > Jonathan > >> --- >> drivers/iio/dac/Kconfig | 15 ++ >> drivers/iio/dac/Makefile | 2 + >> drivers/iio/dac/stm32-dac-core.c | 180 ++++++++++++++++++++++++ >> drivers/iio/dac/stm32-dac-core.h | 51 +++++++ >> drivers/iio/dac/stm32-dac.c | 296 +++++++++++++++++++++++++++++++++++++++ >> 5 files changed, 544 insertions(+) >> create mode 100644 drivers/iio/dac/stm32-dac-core.c >> create mode 100644 drivers/iio/dac/stm32-dac-core.h >> create mode 100644 drivers/iio/dac/stm32-dac.c >> >> diff --git a/drivers/iio/dac/Kconfig b/drivers/iio/dac/Kconfig >> index d3084028..7198648 100644 >> --- a/drivers/iio/dac/Kconfig >> +++ b/drivers/iio/dac/Kconfig >> @@ -274,6 +274,21 @@ config MCP4922 >> To compile this driver as a module, choose M here: the module >> will be called mcp4922. >> >> +config STM32_DAC >> + tristate "STMicroelectronics STM32 DAC" >> + depends on (ARCH_STM32 && OF) || COMPILE_TEST >> + depends on REGULATOR >> + select STM32_DAC_CORE >> + help >> + Say yes here to build support for STMicroelectronics STM32 Digital >> + to Analog Converter (DAC). >> + >> + This driver can also be built as a module. If so, the module >> + will be called stm32-dac. >> + >> +config STM32_DAC_CORE >> + tristate >> + >> config VF610_DAC >> tristate "Vybrid vf610 DAC driver" >> depends on OF >> diff --git a/drivers/iio/dac/Makefile b/drivers/iio/dac/Makefile >> index f01bf4a..afe8ae7 100644 >> --- a/drivers/iio/dac/Makefile >> +++ b/drivers/iio/dac/Makefile >> @@ -29,4 +29,6 @@ obj-$(CONFIG_MAX517) += max517.o >> obj-$(CONFIG_MAX5821) += max5821.o >> obj-$(CONFIG_MCP4725) += mcp4725.o >> obj-$(CONFIG_MCP4922) += mcp4922.o >> +obj-$(CONFIG_STM32_DAC_CORE) += stm32-dac-core.o >> +obj-$(CONFIG_STM32_DAC) += stm32-dac.o >> obj-$(CONFIG_VF610_DAC) += vf610_dac.o >> diff --git a/drivers/iio/dac/stm32-dac-core.c b/drivers/iio/dac/stm32-dac-core.c >> new file mode 100644 >> index 0000000..75e4878 >> --- /dev/null >> +++ b/drivers/iio/dac/stm32-dac-core.c >> @@ -0,0 +1,180 @@ >> +/* >> + * This file is part of STM32 DAC driver >> + * >> + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved >> + * Author: Fabrice Gasnier . >> + * >> + * License type: GPLv2 >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published by >> + * the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, but >> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY >> + * or FITNESS FOR A PARTICULAR PURPOSE. >> + * See the GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License along with >> + * this program. If not, see . >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +#include "stm32-dac-core.h" >> + >> +/** >> + * struct stm32_dac_priv - stm32 DAC core private data >> + * @pclk: peripheral clock common for all DACs >> + * @rst: peripheral reset control >> + * @vref: regulator reference >> + * @common: Common data for all DAC instances >> + */ >> +struct stm32_dac_priv { >> + struct clk *pclk; >> + struct reset_control *rst; >> + struct regulator *vref; >> + struct stm32_dac_common common; >> +}; >> + >> +static struct stm32_dac_priv *to_stm32_dac_priv(struct stm32_dac_common *com) >> +{ >> + return container_of(com, struct stm32_dac_priv, common); >> +} >> + >> +static const struct regmap_config stm32_dac_regmap_cfg = { >> + .reg_bits = 32, >> + .val_bits = 32, >> + .reg_stride = sizeof(u32), >> + .max_register = 0x3fc, >> +}; >> + >> +static int stm32_dac_probe(struct platform_device *pdev) >> +{ >> + struct device *dev = &pdev->dev; >> + struct stm32_dac_priv *priv; >> + struct regmap *regmap; >> + struct resource *res; >> + void __iomem *mmio; >> + int ret; >> + >> + if (!dev->of_node) >> + return -ENODEV; >> + >> + priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL); >> + if (!priv) >> + return -ENOMEM; >> + >> + res = platform_get_resource(pdev, IORESOURCE_MEM, 0); >> + mmio = devm_ioremap_resource(dev, res); >> + if (IS_ERR(mmio)) >> + return PTR_ERR(mmio); >> + >> + regmap = devm_regmap_init_mmio(dev, mmio, &stm32_dac_regmap_cfg); >> + if (IS_ERR(regmap)) >> + return PTR_ERR(regmap); >> + priv->common.regmap = regmap; >> + >> + priv->vref = devm_regulator_get(dev, "vref"); >> + if (IS_ERR(priv->vref)) { >> + ret = PTR_ERR(priv->vref); >> + dev_err(dev, "vref get failed, %d\n", ret); >> + return ret; >> + } >> + >> + ret = regulator_enable(priv->vref); >> + if (ret < 0) { >> + dev_err(dev, "vref enable failed\n"); >> + return ret; >> + } >> + >> + ret = regulator_get_voltage(priv->vref); >> + if (ret < 0) { >> + dev_err(dev, "vref get voltage failed, %d\n", ret); >> + goto err_vref; >> + } >> + priv->common.vref_mv = ret / 1000; >> + dev_dbg(dev, "vref+=%dmV\n", priv->common.vref_mv); >> + >> + priv->pclk = devm_clk_get(dev, "pclk"); >> + if (IS_ERR(priv->pclk)) { >> + ret = PTR_ERR(priv->pclk); >> + dev_err(dev, "pclk get failed\n"); >> + goto err_vref; >> + } >> + >> + ret = clk_prepare_enable(priv->pclk); >> + if (ret < 0) { >> + dev_err(dev, "pclk enable failed\n"); >> + goto err_vref; >> + } >> + >> + priv->rst = devm_reset_control_get(dev, NULL); >> + if (!IS_ERR(priv->rst)) { >> + reset_control_assert(priv->rst); >> + udelay(2); >> + reset_control_deassert(priv->rst); >> + } >> + >> + /* When clock speed is higher than 80MHz, set HFSEL */ >> + priv->common.hfsel = (clk_get_rate(priv->pclk) > 80000000UL); >> + ret = regmap_update_bits(regmap, STM32_DAC_CR, STM32H7_DAC_CR_HFSEL, >> + priv->common.hfsel ? STM32H7_DAC_CR_HFSEL : 0); >> + if (ret) >> + goto err_pclk; >> + >> + platform_set_drvdata(pdev, &priv->common); >> + >> + ret = of_platform_populate(pdev->dev.of_node, NULL, NULL, dev); >> + if (ret < 0) { >> + dev_err(dev, "failed to populate DT children\n"); >> + goto err_pclk; >> + } >> + >> + return 0; >> + >> +err_pclk: >> + clk_disable_unprepare(priv->pclk); >> +err_vref: >> + regulator_disable(priv->vref); >> + >> + return ret; >> +} >> + >> +static int stm32_dac_remove(struct platform_device *pdev) >> +{ >> + struct stm32_dac_common *common = platform_get_drvdata(pdev); >> + struct stm32_dac_priv *priv = to_stm32_dac_priv(common); >> + >> + of_platform_depopulate(&pdev->dev); >> + clk_disable_unprepare(priv->pclk); >> + regulator_disable(priv->vref); >> + >> + return 0; >> +} >> + >> +static const struct of_device_id stm32_dac_of_match[] = { >> + { .compatible = "st,stm32h7-dac-core", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, stm32_dac_of_match); >> + >> +static struct platform_driver stm32_dac_driver = { >> + .probe = stm32_dac_probe, >> + .remove = stm32_dac_remove, >> + .driver = { >> + .name = "stm32-dac-core", >> + .of_match_table = stm32_dac_of_match, >> + }, >> +}; >> +module_platform_driver(stm32_dac_driver); >> + >> +MODULE_AUTHOR("Fabrice Gasnier "); >> +MODULE_DESCRIPTION("STMicroelectronics STM32 DAC core driver"); >> +MODULE_LICENSE("GPL v2"); >> +MODULE_ALIAS("platform:stm32-dac-core"); >> diff --git a/drivers/iio/dac/stm32-dac-core.h b/drivers/iio/dac/stm32-dac-core.h >> new file mode 100644 >> index 0000000..d3099f7 >> --- /dev/null >> +++ b/drivers/iio/dac/stm32-dac-core.h >> @@ -0,0 +1,51 @@ >> +/* >> + * This file is part of STM32 DAC driver >> + * >> + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved >> + * Author: Fabrice Gasnier . >> + * >> + * License type: GPLv2 >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published by >> + * the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, but >> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY >> + * or FITNESS FOR A PARTICULAR PURPOSE. >> + * See the GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License along with >> + * this program. If not, see . >> + */ >> + >> +#ifndef __STM32_DAC_CORE_H >> +#define __STM32_DAC_CORE_H >> + >> +#include >> + >> +/* STM32 DAC registers */ >> +#define STM32_DAC_CR 0x00 >> +#define STM32_DAC_DHR12R1 0x08 >> +#define STM32_DAC_DHR12R2 0x14 >> +#define STM32_DAC_DOR1 0x2C >> +#define STM32_DAC_DOR2 0x30 >> + >> +/* STM32_DAC_CR bit fields */ >> +#define STM32_DAC_CR_EN1 BIT(0) >> +#define STM32H7_DAC_CR_HFSEL BIT(15) >> +#define STM32_DAC_CR_EN2 BIT(16) >> + >> +/** >> + * struct stm32_dac_common - stm32 DAC driver common data (for all instances) >> + * @regmap: DAC registers shared via regmap >> + * @vref_mv: reference voltage (mv) >> + * @hfsel: high speed bus clock >> + */ >> +struct stm32_dac_common { >> + struct regmap *regmap; >> + int vref_mv; >> + bool hfsel; >> +}; >> + >> +#endif >> diff --git a/drivers/iio/dac/stm32-dac.c b/drivers/iio/dac/stm32-dac.c >> new file mode 100644 >> index 0000000..ee9711d >> --- /dev/null >> +++ b/drivers/iio/dac/stm32-dac.c >> @@ -0,0 +1,296 @@ >> +/* >> + * This file is part of STM32 DAC driver >> + * >> + * Copyright (C) 2017, STMicroelectronics - All Rights Reserved >> + * Authors: Amelie Delaunay >> + * Fabrice Gasnier >> + * >> + * License type: GPLv2 >> + * >> + * This program is free software; you can redistribute it and/or modify it >> + * under the terms of the GNU General Public License version 2 as published by >> + * the Free Software Foundation. >> + * >> + * This program is distributed in the hope that it will be useful, but >> + * WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY >> + * or FITNESS FOR A PARTICULAR PURPOSE. >> + * See the GNU General Public License for more details. >> + * >> + * You should have received a copy of the GNU General Public License along with >> + * this program. If not, see . >> + */ >> + >> +#include >> +#include >> +#include >> +#include >> +#include >> +#include >> + >> +#include "stm32-dac-core.h" >> + >> +#define STM32_DAC_CHANNEL_1 1 >> +#define STM32_DAC_CHANNEL_2 2 >> + >> +/** >> + * struct stm32_dac - private data of DAC driver >> + * @common: reference to DAC common data >> + */ >> +struct stm32_dac { >> + struct stm32_dac_common *common; >> +}; >> + >> +static int stm32_dac_is_enabled(struct stm32_dac *dac, int channel) >> +{ >> + u32 en, val; >> + int ret; >> + >> + ret = regmap_read(dac->common->regmap, STM32_DAC_CR, &val); >> + if (ret < 0) >> + return ret; >> + if (channel == STM32_DAC_CHANNEL_1) >> + en = FIELD_GET(STM32_DAC_CR_EN1, val); >> + else >> + en = FIELD_GET(STM32_DAC_CR_EN2, val); >> + >> + return !!en; >> +} >> + >> +static int stm32_dac_enable(struct iio_dev *indio_dev, int channel) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + u32 en = (channel == STM32_DAC_CHANNEL_1) ? >> + STM32_DAC_CR_EN1 : STM32_DAC_CR_EN2; >> + int ret; >> + >> + ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, en, en); >> + if (ret < 0) { >> + dev_err(&indio_dev->dev, "Enable failed\n"); >> + return ret; >> + } >> + >> + /* >> + * When HFSEL is set, it is not allowed to write the DHRx register >> + * during 8 clock cycles after the ENx bit is set. It is not allowed >> + * to make software/hardware trigger during this period neither. >> + */ >> + if (dac->common->hfsel) >> + udelay(1); >> + >> + return 0; >> +} >> + >> +static int stm32_dac_disable(struct iio_dev *indio_dev, int channel) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + u32 en = (channel == STM32_DAC_CHANNEL_1) ? >> + STM32_DAC_CR_EN1 : STM32_DAC_CR_EN2; >> + int ret; >> + >> + ret = regmap_update_bits(dac->common->regmap, STM32_DAC_CR, en, 0); >> + if (ret) >> + dev_err(&indio_dev->dev, "Disable failed\n"); >> + >> + return ret; >> +} >> + >> +static int stm32_dac_get_value(struct stm32_dac *dac, int channel, int *val) >> +{ >> + int ret; >> + >> + if (channel == STM32_DAC_CHANNEL_1) >> + ret = regmap_read(dac->common->regmap, STM32_DAC_DOR1, val); >> + else >> + ret = regmap_read(dac->common->regmap, STM32_DAC_DOR2, val); >> + >> + return ret ? ret : IIO_VAL_INT; >> +} >> + >> +static int stm32_dac_set_value(struct stm32_dac *dac, int channel, int val) >> +{ >> + int ret; >> + >> + if (channel == STM32_DAC_CHANNEL_1) >> + ret = regmap_write(dac->common->regmap, STM32_DAC_DHR12R1, val); >> + else >> + ret = regmap_write(dac->common->regmap, STM32_DAC_DHR12R2, val); >> + >> + return ret; >> +} >> + >> +static int stm32_dac_read_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int *val, int *val2, long mask) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + int ret; >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + return stm32_dac_get_value(dac, chan->channel, val); >> + case IIO_CHAN_INFO_SCALE: >> + *val = dac->common->vref_mv; >> + *val2 = chan->scan_type.realbits; >> + return IIO_VAL_FRACTIONAL_LOG2; >> + case IIO_CHAN_INFO_ENABLE: >> + ret = stm32_dac_is_enabled(dac, chan->channel); >> + if (ret < 0) >> + return ret; >> + *val = ret; >> + return IIO_VAL_INT; >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static int stm32_dac_write_raw(struct iio_dev *indio_dev, >> + struct iio_chan_spec const *chan, >> + int val, int val2, long mask) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + >> + switch (mask) { >> + case IIO_CHAN_INFO_RAW: >> + return stm32_dac_set_value(dac, chan->channel, val); >> + case IIO_CHAN_INFO_ENABLE: >> + if (!!val) >> + return stm32_dac_enable(indio_dev, chan->channel); >> + else >> + return stm32_dac_disable(indio_dev, chan->channel); >> + default: >> + return -EINVAL; >> + } >> +} >> + >> +static int stm32_dac_debugfs_reg_access(struct iio_dev *indio_dev, >> + unsigned reg, unsigned writeval, >> + unsigned *readval) >> +{ >> + struct stm32_dac *dac = iio_priv(indio_dev); >> + >> + if (!readval) >> + return regmap_write(dac->common->regmap, reg, writeval); >> + else >> + return regmap_read(dac->common->regmap, reg, readval); >> +} >> + >> +static const struct iio_info stm32_dac_iio_info = { >> + .read_raw = &stm32_dac_read_raw, >> + .write_raw = &stm32_dac_write_raw, >> + .debugfs_reg_access = &stm32_dac_debugfs_reg_access, >> + .driver_module = THIS_MODULE, >> +}; >> + >> +#define STM32_DAC_CHANNEL(chan, name) { \ >> + .type = IIO_VOLTAGE, \ >> + .indexed = 1, \ >> + .output = 1, \ >> + .channel = chan, \ >> + .info_mask_separate = \ >> + BIT(IIO_CHAN_INFO_RAW) | \ >> + BIT(IIO_CHAN_INFO_ENABLE) | \ >> + BIT(IIO_CHAN_INFO_SCALE), \ >> + .scan_type = { \ >> + .sign = 'u', \ >> + .realbits = 12, \ >> + .storagebits = 16, \ >> + }, \ >> + .datasheet_name = name, \ >> +} >> + >> +static const struct iio_chan_spec stm32_dac_channels[] = { >> + STM32_DAC_CHANNEL(STM32_DAC_CHANNEL_1, "out1"), >> + STM32_DAC_CHANNEL(STM32_DAC_CHANNEL_2, "out2"), >> +}; >> + >> +static int stm32_dac_chan_of_init(struct iio_dev *indio_dev) >> +{ >> + struct device_node *np = indio_dev->dev.of_node; >> + unsigned int i; >> + u32 channel; >> + int ret; >> + >> + ret = of_property_read_u32(np, "st,dac-channel", &channel); >> + if (ret) { >> + dev_err(&indio_dev->dev, "Failed to read st,dac-channel\n"); >> + return ret; >> + } >> + >> + for (i = 0; i < ARRAY_SIZE(stm32_dac_channels); i++) { >> + if (stm32_dac_channels[i].channel == channel) >> + break; >> + } >> + if (i >= ARRAY_SIZE(stm32_dac_channels)) { >> + dev_err(&indio_dev->dev, "Invalid st,dac-channel\n"); >> + return -EINVAL; >> + } >> + >> + indio_dev->channels = &stm32_dac_channels[i]; >> + indio_dev->num_channels = 1; >> + >> + return 0; >> +}; >> + >> +static int stm32_dac_probe(struct platform_device *pdev) >> +{ >> + struct device_node *np = pdev->dev.of_node; >> + struct iio_dev *indio_dev; >> + struct stm32_dac *dac; >> + int ret; >> + >> + if (!np) >> + return -ENODEV; >> + >> + indio_dev = devm_iio_device_alloc(&pdev->dev, sizeof(*dac)); >> + if (!indio_dev) >> + return -ENOMEM; >> + platform_set_drvdata(pdev, indio_dev); >> + >> + dac = iio_priv(indio_dev); >> + dac->common = dev_get_drvdata(pdev->dev.parent); >> + indio_dev->name = dev_name(&pdev->dev); >> + indio_dev->dev.parent = &pdev->dev; >> + indio_dev->dev.of_node = pdev->dev.of_node; >> + indio_dev->info = &stm32_dac_iio_info; >> + indio_dev->modes = INDIO_DIRECT_MODE; >> + >> + ret = stm32_dac_chan_of_init(indio_dev); >> + if (ret < 0) >> + return ret; >> + >> + ret = iio_device_register(indio_dev); >> + if (ret) >> + return ret; >> + >> + return 0; >> +} >> + >> +static int stm32_dac_remove(struct platform_device *pdev) >> +{ >> + struct iio_dev *indio_dev = platform_get_drvdata(pdev); >> + >> + iio_device_unregister(indio_dev); > use devm_iio_device_register and drop the remove entirely > (I guess this may make no sense once I've looked at later > patches however!) Good guess ;-) But okay, I'll use devm_ anyway, regardless of other patches. Thanks & Regards, Fabrice >> + >> + return 0; >> +} >> + >> +static const struct of_device_id stm32_dac_of_match[] = { >> + { .compatible = "st,stm32-dac", }, >> + {}, >> +}; >> +MODULE_DEVICE_TABLE(of, stm32_dac_of_match); >> + >> +static struct platform_driver stm32_dac_driver = { >> + .probe = stm32_dac_probe, >> + .remove = stm32_dac_remove, >> + .driver = { >> + .name = "stm32-dac", >> + .of_match_table = stm32_dac_of_match, >> + }, >> +}; >> +module_platform_driver(stm32_dac_driver); >> + >> +MODULE_ALIAS("platform:stm32-dac"); >> +MODULE_AUTHOR("Amelie Delaunay "); >> +MODULE_DESCRIPTION("STMicroelectronics STM32 DAC driver"); >> +MODULE_LICENSE("GPL v2"); >> >